146 Motorsport Vehicles in Australia for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
32
Roll Cage
Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) haltech and loom $2000 extra brakes - need plumbing and finishing off turbo - eith
40
Roll Cage
2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh
42
Roll Cage
Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh
15
Roll CageLog Book
EVO7RS - Les Walkden built factory RS, Car No. L12. Ex Ed Ordynski car, CAMS Log booked, Chromoly welded cage, Freshly rebuilt Evo 9 Mivec motor to Targa spec, 250awkw, near new Owen Developments turbo, Motec ECU with anti lag, New MCA Gold suspension, freshly rebuilt RS gearbox, Coralba rally computer, heated front screen, quick release RaceTech wheel, near new oil cooler and radiator, Evo 9 front bumper and rear diffuser, new belts, new fire extinguisher plus fire bomb, 2 sets of OZ light weig
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65
20
2013 Renault Megane RS265 6 Speed 2lt Turbo Brilliant drivers car - Ran faultlessly in every stage of Adelaide Rally All maintenance up to date, including timing belt, clutch and brakes having very recently been taken care of. Non Caged - has been returned to stock trim except steering wheel and shifter (Have Velo GP1 Drivers Seat if needed) Full 3" exhaust ITG Intake SMF Clutch conversion Eibach springs Enkei 18" wheels with AR1 tyres DBA rotors with Intima SR pads RS tuned Velo aftermark
6
Roll CageLog Book
Immaculate Evo with Targa Barrier Reef podium. Built by LF Engineering in WA. Owned and fastidiously maintained by Ross Dunkerton since late 2018. Further info and more details upon application to 0409117906 Will assist with transportation.
5
Comfortable and reliable for endurance/bash rallying, featuring, 6x steel wheels good rubber, bull bar, driving lights, sump guard, roof rack with light bar, tinting. Good runner NO RUST.
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
10
Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
5
Roll CageLog Book
1984 Toyota AE86 Sprinter, Motorsport Australia Logbook. 4AG 1600 twin cam with 4-2-1 extractors. T50 5 spd manual transmission. New Exedy OEM clutch. Timing belt, tensioner, water pump, crank and cam seals replaced June 2019. Cusco strut brace. Aero bonnet latches, Front Tow hook, Rhino Alarm & Immobilser 6 point Motorsport Austrlia approved roll cage. Cobra Monaco Pro driving seat on RPM seat side mounts. Ecliptech SHIFT-i shift lights. Mains battery power shutoff switch. 4.3 LSD.
71
Here is yet another stunning example of a SS Group A Walkinshaw. Once again, this car was originally part delivered to the D’Alberto Holden dealership in Echuca Victoria and kept with the D’Alberto family as part of their private collection until 2018 which was never registered and still remains unregistered with its original blank logbook meaning you could be the first private owner of this very special HSV. In that time the car was only used for maintenance purposes and to this day has only cl
6
Complete rolling SLC kit with lots of extra bits. No engine or gearbox but suits LS or fit any engine/gearbox of your choice. Call for more details.
15
Roll Cage
No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.
8
526 Keith Black Hemi, Magneto, Ken Veaney heads, Ally rods, Bryant crank, Reid cased Powerglide with auto shift,Ladder bar rear end,. Fire supression system, nappy, Wet sump. 2 parachutes. Very straight reliable car, ready to race.
16
Roll CageLog Book
1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das
9
Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000