59 items for sale

1927 Ford Brogie Roadster, complete roller with Mark Williams rear end. Body work needs some repair.

Modified sedan ED falcon Lightweight, titanium exhaust, axles and 95% of bolts. Haltech, pd16 elite 2500, Aim dash. Racetech 119 kevlar seat, floating alloy 9 inch, billet alloy hubs, wilwood brakes. Sweet rack. Big hp sohc 4ltr with billet rockers titanium valves. Brand new bert gen 2 box. Integra IDA shocks and spares, also Penske shocks. PWR radiator, have spares, scales and whatever can sell entire setup. Too much to list if interested call during work hours and can provide info or pictures

Ex Indy 500 racer, chassis # H-64172. One of the very first, of the rear engined Indycar’s, built by the legendary “Magnesium master”, Mike Halibrand, for Dan Gurney’s “All American Racers” (AAR). Raced in 1965 by multiple USAC Champion Roger McLuskey at; 1) Phoenix, March 28th, finished 21st. 2) Indy 500, May 31st, Finished 30th. 3) Hoosier Gran Prix July 26th, finished 3rd. 4) Atlanta 250, August 1st, finished 9th. 5) Milwaukee 150, August 14th, finished 5th. 6) Milwaukee 200, August 22nd,

Holden Tonner, 555 BBC Dart Pro 1 Alloy heads. Jesel belt drive. Induction Solutions 800hp direct port nitrous system and controller. Davinci USA Alloy carby. Built turbo 400 trans, line lock, 5500 converter. Ladder bar rear with Strange coil overs, custom built diff housing with full spool. 16 volt charging system. Much more. Ran 9.0 on mild tune and 250 hp nitrous. and has since been retuned to run in the 8"s. Videos available.

540ci Big Block Chev Dragster, American built, 237” wheel base, turn key ready to race, includes enclosed trailer. Owner retired from racing. Car has run 7.7 seconds at 172mph, with scope for further development. 32 channel data logger, Biondo delay box, MSD ignition, new Hoosier slicks, fully equipped enclosed Trailer, spares, fuel, all existing data and support from current owner. ENGINE rebuilt and dyno tuned by PM Race Engines, twin tunnel ram methanol injection, Reher Morrison heads, Crane

Lx hatch. Fibreglass front, doors, bonnet, hatch, bumpers. 496 big block chev, mechanical injection with nitrous. Ati2 power glide, 4 link rear 9". Haltech elite vms controlled system, iq3 dash display. 90% finished.

A rare opportunity to purchase one of Australia’s most successful and proven Top Sportsman race cars. Specifications * 584ci Big Block Chevrolet * Over 1,200hp * Brodix Block * Profiler Heads * Powerglide Transmission * Transmission fully rebuilt 10 months ago * A1 Performance bolt-together converter * Spare stator included for high-altitude racing * Twin parachutes * Delta One wheels (over $12,000 replacement cost) * Racepak V300SD data logger with full sensor package Engine Freshen-Up The

J&J ex donny schatz tall boy wingless sprint complete with spares package and heaps of extras to go with car if required car chassis checked and straight freshly powder coated and fully painted gloss black has full bmrs lines, car and engine full of titanium and sealed , titanium throttle pedal and brake pedal and rock screen 6 into 1 pipes, dmi xr2 diff swivel drive fully rebuilt with new pinion and crown wheel new lower shaft and swivel drive , wilwood brakes, dmi torque tube and ball, ste

360ci sbc, Howard's crank, dart cyl heads, crane valve train, holley hp 950 methanol carb, msd 7al, custom stainless exhaust. 4 link 9" with new mc bros arms, 4.88 ratio, 35 spline, 31x13 slick, 2sp glide with blanket & trans brake, 3800 converter, hq front stabs with slotted rotors & girlock calliper. 2 1/2" roof chop, 6 point cage, all new poly carbonate windows, DJ safety chute, full bare metal respray (3 years), fibreglass bonnet & bumpers. Still in current ihra tech. 9.52 @ 142 mackay 9.6

Selling Super Sedan Package Dominator with 350 Chev, bowtie block Bert Gearbox New Tyres New Shocks (have only done one race meet) Owned since new To many spares and tools to list, wheels, panels etc Still registered Transporter 2004 Dual Cab Isuzu 11 months Rego 361K Fully fitted out to go racing with: Ramps Winch Floodlights Toolboxes Tyre racks Air compressor Generator Full set up ready to go racing. Call for more information.

"For sale: 528 big block Chev built by Jack's Brothers—Bowtie four-bolt block, Crower 4" crank, Carillo rods, JE pistons, Big Brodie alloy heads, Comp solid roller cam—Get-em billet 1300cfm blade carby set up by Trevor in the US, Eng dyno'd by the late Wayne Cartlige make close to 800 horsepower tuned on 98 fuel. have dyno figures and cam card. All the fruit. Turbo 400 trans by Nick at American Imports rev patern with brake will handle 1500hp, TCE 4000 converter, built for nitrous. Mc Donald Br

V12 Lincoln Zephyr powered 33 Ford Bonneville Coupe. Built on an original 34 chassis, V12 Lincoln running 3 stromberg 97's carbies, recently fitted with Hogan finned alloy heads. C10 Auto with locar shifter, Dutchman Winters Quick Change, Schroeder side steer steering. Dropped axle, morris lever shocks. Leather interior to suit 6'2 driver, hand crafted nose panel, grill, and mascot. Very long and expensive proffessional build. 6.50 x18" Excelsior rears on wires,16 in Coker fronts. Cover car on C

540 cube big block chev, crower crank 4.250” stroke, Oliver rods 6.535”, JE Blower pistons, rotating assembly all brand new, Dart 10.200 tall deck block fresh bore + 20, Pontiac big chief CNC cylinder heads, TND rollers, custom grind roller cam and lifters, Jessel timing set , 1471 littlefield super charger, new fuel system, bird hat with nitro barrel valve, Enderly 110 pump, fisher blow off valve, 5 stage dry sump system, Peterson tank, everything in photo comes with the engine.

2007 Stroupe promod Chevy cobalt body Electromotion for chutes Floating axles 16v battery system Brand new Koni single adjustable shocks Originally setup for 400 small black With a manual Carbon brakes Message or call for more info

FOR SALE!!! 1968 RJ Chassis Camaro. - 2010 Chassis, build number #1332. - Good for ProMod, Nitrous, Import, etc. - Very low runs on the car. - Harry Glass carbon body and interior. - Strange Ultra front spindle struts. - Steel brakes all round. - Afco Mencer double adjustable rear shocks. - 5 x 4.75" stud pattern rear. - RJ racecars fabricated housing, with strange 2-piece pro stock axles. - 16" 4 link center, 5x4.75" PCD steel rear brakes. - 110" wheelbase. - MSD Programmable Ignitio

2006 Pontiac GTO Fivestar Race Car Bodies body, Jerry Bickel pro stock chassis Suspension: Lamb front suspension w/ spindle mount wheels, disk brakes all around Drivetrain: Ford 9" rear end w/ Strange center section, Mark Williams 40 spline gun drilled axles Interior: carbon fiber interior, Autometer gauges, Dedenbear delay, Safecraft fire system Other: Mezziere water pump, Magnafueal fuel pump, Stroud belts and chutes Asking $45,000 usd to $70,000 usd depending on the following: roller-45k, M

Ex Clem Smith collection, raced by Ron O’Connell Purchased in 2017 and placed on display at Winton Motor raceway since. Gardner chassis with Hudson Terraplane engine and box. Comes with extra in\out box and roll cage/ crash bars. Car is located at Winton raceway for viewing.

Holden hz drag car good reliable car autometre gauges 304 with a 100 wet shot of nitrous programable msd ignition roller rockers victor jr highrise manifold 750 dp holley 30tho pistons standard rods and crank electric water pump car was fully rewired 12mths ago trimatic gearbox vl turbo diff with full spool 31 spline billet axels 3.9 gears hoozier slicks and front runners has just had all bushes front and back replaced all new tie rod ends and arms. Glass front and rear windows perspex in doors

Weldwell Engineering Cro-moly Altered. 2005 Built Chassis. 125" Wheelbase. Complete Race Car & Engine Package. Immaculate condition. Methanol Injected Motown 407 Chev / Powerglide, Strange Full Floater, Wheelie Bars. A very well built, reliable, easy to manage race car in spotless immaculate condition with brand new Metallic Black Paint and Ceramic Coated Headers. Great reviews from previous owners. Consistent 8.5 ET 175 MPH. For further info. call Frank: 0402 314 308