SSR Enabled
Australia's #1 Enthusiast & Motorsport Marketplace
Australia's #1 Enthusiast & Motorsport Marketplace

530 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum

Featured ads

All Results

79
Registered
Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original

Kogarah NSW, Australia
Share
Watch
6
Registered
Twin turbo 2JZ 4 door road registered sedan. Has upgraded Supra front brakes and coilover suspension. Clean tidy Japanese import with 230,000 kms. Excellent tyres fitted to BBS wheels

Kirrawee NSW, Australia
Share
Watch
11
Was $21,000$18,000
Roll Cage
Log Book
1999 Hyundai Excel. One owner race car. Built in 2018/2019 and progressively developed ever since. Consistently a top 10 car in NSW championship. Several podium finishes. GWR engine/gearbox. 2 sets wheels with tyres. Bond National roll cage. Motorsport Australia log book. Custom stainless exhaust. Large spares package included. Very clean and tidy car. Only ever had very minor race damage. Car is original factory yellow with 1/2 wrap.

Wallacia NSW, Australia
Share
Watch
11
Competition Motorsport Pedal Slider The pedal slider system supports driver change ergonomics and repeatable longitudinal pedal positioning while maintaining pedal geometry. It is designed to improve safety and driver ergonomics. Pedal Slider Designed & Manufactured in Australia by PE Racing PE Racing is an Australian Motorsport component Manufacturer specialising in Competition-grade Pedal Assemblies for physical Motorsport use. We have supplied Award Winning Pedal Assemblies to the Racing in

Oakdale NSW, Australia
Share
Watch
15
Enclosed single axle trailer — $4,500 12 Months Rego. Tilt trailer Hydro Brakes New Spare tyre Set of Ramps Tyre Racks Measurements: 6'2" wide 12'6" Length 3'9" Height Nose Section 2'10" Total Length 15'6" Used to transport a Griffin sports car and occasionally a Clubman. Tows very well.

South Penrith NSW, Australia
Share
Watch
8
Body / Layout – Rear spacious kitchen, Front sleeping with single beds rear full ensuite with large shower, clever layout Tare / ATM – 2867 Length – 19’6 Berths – 3 Suitability –Luxury travel Set-up Highlights • Battery system – Deep-cycle agm batteries • Solar – Plenty of solar • Water- Fresh water tanks • Heating / Cooling – Truma gas heater plus reverse-cycle air-conditioner, four-season comfort • Kitchen – Full-size appliances, generous bench space, larger fridge upgrade from new and comf

Bega NSW, Australia
Share
Watch
10
PE Racing is an Australian Manufacturer specialising in Competition-grade components. Load Spreading Washers - with 12mm locating shoulder to underside. How often do you find the panels you mount end up with the holes flogged out? Simple but effective, we designed this washer with a locating shoulder on the underside. This provides better lateral support for the connection. It reduces the bearing load by increasing the connection hole surface area. This results in less movement & reduced

Oakdale NSW, Australia
Share
Watch
16
Registered
Log Book
Now available for sale is this 2005 Holden VZ HSV Clubsport Z SERIES sedan. With a 6.0L LS2 engine and 6-speed manual transmission, this beast is ready to hit the road. Equipped with 19-inch alloy wheels, a sport suspension, and a rear spoiler, this HSV is as stylish as it is powerful. The Phantom black body and leather steering wheel add a touch of luxury to this high-performance vehicle. Safety features like dual front airbags, traction control, and ABS ensure you can enjoy the thrill of drivi

Kogarah NSW, Australia
Share
Watch
38
Registered
Are you ready to experience the power and performance of a true legend? Look no further than this 1991 Nissan GT-R HR32. This iconic Australian delivered R32 GT-R is finished in sleek Jet Silver (1 of 25 made) paint with a black interior is a rare find that will turn heads wherever you go. It is build number 51 of the 100 cars that were Australian delivered. The GT-R HR32 comes equipped with a twin turbo EFI 2.6L engine and a 5-speed manual transmission that guarantees an exhilarating driving ex

Kogarah NSW, Australia
Share
Watch
35
Are you a classic car enthusiast looking for your dream ride? Look no further! This 1974 Ford Falcon XB GT Sedan in stunning Apollo Blue is the car for you. With a build date of 06/74, this beauty is in pristine condition and ready to take you on the ride of a lifetime. The powerful 351 engine paired with a manual 4-speed Top Loader transmission ensures a thrilling driving experience every time you hit the road. The sleek black vinyl interior complements the exterior perfectly, making for a st

Kogarah NSW, Australia
Share
Watch
8
12’ Offroad Caravan 2 Berth ​11 month rego General Key Features • Galvanized chassis with armor plate protection for water tanks etc and CruisemasterTM DO35 hitch • 16-inch mud-terrain wheels, for stable and safe off-road travel with 2 spares on the back • Two water tanks provide 120L freshwater plus one 80L grey water tank • Twin shock absorbers, electric brakes and independent trailing arm suspension • Off-grid power - 3 x 100Ah AGM batteries, 300W roof-mounted solar system with controlle

Bega NSW, Australia
Share
Watch
46
Registered
Looking for a head-turning, performance-driven vehicle that won't break the bank? Check out this 2005 HSV Clubsport for just $69,000. With only 31,644 km on the odometer, this stunning Phantom Black R8 is sure to impress. Equipped with a powerful 6.0L LS2 engine and a slick 6-speed manual transmission, this Clubsport will give you the thrill of a lifetime. Cruise in style with features like 19-inch alloy wheels, sporty body kit, and a rear spoiler that sets you apart from the rest. Stay safe on

Kogarah NSW, Australia
Share
Watch
55
Registered
Looking for the ultimate combination of power and style? Look no further than this 2007 Ford FPV F6 Typhoon BF MKII. One of only 300 examples ever produced. The F6 R-Spec Typhoon achieved its intent with a bespoke suspension setup, specifically tuned to the mass of the six-cylinder super sedan. Front damping rates were a key focus, the goal to improve turn-in response while retaining ride quality. ‘Dark Argent’ ss19-inch alloys and a rear spoiler lifted the exterior, along with specific badging.

Kogarah NSW, Australia
Share
Watch
10
PE Racing is an Australian Manufacturer specialising in Competition-grade components. PE-Clamps are a quick & easy solution to mounting panels, cables, plumbing or accessories securely to common tube and roll cage sizes; eliminating the need for welding. PE clamps come in four different styles and a variety of sizes to satisfy a wide range of tube mounting needs. The images show a small example of potential uses. We have Engineered these to withstand a 10G dynamic load of 5 kg (equivalent to

Oakdale NSW, Australia
Share
Watch
43
Released in January 2005, the FPV BA MKII F6 Tornado was a rear-wheel drive, performance utility. Manufactured in Campbellfield, Victoria, the F6 Tornado was powered by a 4.0-litre turbocharged six- cylinder petrol engine that was mated to a six-speed manual transmission. This 2005 BA MKII FPV F6 Tornado and build number 088. One of only 137 made and 27 in Rapid Yellow. The Tornado is in showroom condition and travelled just under 5,000 kilometres since it rolled off the production line. This ve

Kogarah NSW, Australia
Share
Watch
10
PE Racing is an Australian Motorsport component Manufacturer specialising in Competition-grade Pedal Assemblies for physical Motorsport use. We have supplied these Award Winning Pedal Assemblies to the Racing industry since 2013, with documented use across multiple Race Categories & Countries. Our Pedals are designed as safety-critical driver control systems, they are supported by Patented Engineering, detailed Technical Documentation, and a long history of competition use. Designed for the Dri

Oakdale NSW, Australia
Share
Watch
8
Roll Cage
Log Book
Selling Alfa Romeo 156 GTA 3.2L V6 Negotiable on price Was originally built for the Bathurst 24hr series, and competed in APCC 2003/04. Features include: Full roll cage Dry break fuel system 4 way adjustable MCA shocks Stainless Headers with catalytic converters removed New exhaust fitted Wheel stud kit fitting Aircon removed Brand new clutch Brakes Callipers refurbed Limited slip diff Has a comprehensive spares package including: 4 sets of rims 4 X Custom trailing arms Gear shift cables S

Taren Point NSW, Australia
Share
Watch
10
Unleash Performance with PE Racing’s Lightweight and Reliable Racing Pedal Assemblies! PE Racing is an Australian Motorsport component Manufacturer specialising in Competition-grade Pedal Assemblies for physical Motorsport use. We have supplied these Award Winning Pedal Assemblies to the Racing industry since 2013, with documented use across multiple Race Categories & Countries. Our Pedals are designed as safety-critical driver control systems, they are supported by Patented Engineering, detail

Oakdale NSW, Australia
Share
Watch
37
Registered
Now available for sale is this 1994 VR Holden HSV Commodore Series 1 GTS 215i 6 speed manual sedan with ABS & IRS, and HSV build number 054. This VR has had only two owners, with the current ownership now being 30 years. First used as a daily drive for ten years whilst carefully modifying the vehicle for weekend track events over the next ten years. The car has not been on the track since! This vehicle is also now suitable for low-cost registration in the historic category. The Sherbrooke Green

Kogarah NSW, Australia
Share
Watch
50
Roll Cage
Log Book
BMW 135i 1M-Style Widebody Track Project – $80k+ Build Value – No Engine/Gearbox Clean PPSR. Not recorded as written off, not recorded as stolen, and no finance/security interest recorded. $44,990 For sale is a very serious 2008 BMW 135i Coupe project, built into a proper 1M-style widebody road/track car with a huge amount of expensive work already completed. This is not a basic shell and not a simple unfinished project. The hard and expensive part of the build has already been done: widebod

Kingsgrove NSW, Australia
Share
Watch