1,817 items in Australia for sale

Enclosed trailer, This trailer has had the axles upgraded for extra weight capacity. It has been used for carrying Go Karts but can be used for a single vehicle transporter. As you can see in the pictures it has Two doors on either side and one door in the back.

FOR SALE – BRAND NEW LEGEND CAR PACKAGE $48,999 – READY TO RACE + FULL 2026 SERIES ENTRY INCLUDED This is the best value turn-key racing package in Australia. Buy a brand new Legend Car and get guaranteed entry into the entire 2026 Hi-Tec Super Series — no waiting lists, no missing out. Why Race a Legend Car? • Equal machinery & true driver parity — if you’re fast, you can win immediately. • Yamaha MT09 engine capable of multiple seasons without a refresh. • Like a go-kart on steroids — in

* EXPRESSION OF INTEREST * (Regretful Sale) Go Endurance Racing with your mates at an affordable level like the Bathurst 6hr. TOYOTA COROLLA SPORTIVO ZZE123 Motec 400 with Motec Dash, fresh NTE build 2ZZ 1.8 DOHC, 6 spd Cusco LSD G/box MCA Gold full adjustable Coil Overs, Dry brake refueling system, surge tank, Fabraications 6 point Hybrid Roll Cage, In car radio kit & Dorian ** LARGE TANDAM TRAILER ** with pull out ramps Spares Package - Complete NTE built 2ZZ with 6 spd KAAZ LSD G/box &

Originally built by Gene Cook for Greg Crick. Not eligible for GROUP U., but may run as ‘invited’. Being sold as a roller. NO MOTOR OR GEARBOX. The RX4 diff has been replaced with a 9” Ford. I bought the car in 1989 and n 1995, removed the turbo 13b, and replaced it with a 350 Chev.. The car has not run much since due to medical issues. The original moulds and spare original panels go with the car, as well as the original log book. It could be built with a 13b, 13b turbo, or 350 Chev. I did have

Sports sedan 3D log booked 1020kg w/o driver 450whp National spec roll cage with front tower reinforcement, tubbed front and rear arches and custom front end crash bar K24 2.4L engine swapped with K20 custom ported head, Pistons, rods, balanced crank, cams, valves and springs. MCA custom valved shocks by DNA motorsport Full rose jointed suspension arms Motec suite of electronics with full milspec re-wire by Prowire with DBW throttle w/flat shift Custom ratio 6-speed dog box with Hollinger loa

Championship winning capable car. Triple eight engineering race built. No expenses spared. built to win. only selling due to change of heart and other committments. MA approved and sealed engine. Comes with complete spare car for parts

Holden VE SS-Z Ute – HPF Stage 5 Build (minus exhaust) – Under 1,000 km Since Build This is one of the cleanest, tightest VE SS-Zs you’ll find — freshly built, barely driven, and ready for its next owner who knows quality. The HPF Stage 5 package (minus exhaust) has just been completed and done under 1,000 km, making this essentially a new high-performance setup that’s still crisp, strong, and unspoiled. Performance & Upgrades HPF Stage 5 package (minus exhaust) — completed by Horsepowe

Aussie Racing Car engine as used in the #38 JCRE Mustang at the Adelaide 500 - 3rd for the round. Completely fresh build prior to the meeting including: - Dyno sheet supplied - approx 150HP - Overhauled cylinder head with KibbleWhite valve springs - 82mm Wiseco Pistons - Brand new INEX water cooled cylinder - Brand new conrods, conrod bolts, and bottom end bearings - Brand new clutch basket - Reconditioned gearbox, with brand new 2nd and 4th gears. - Brand new oil pump - Baffled sump - Slotte

Cooper S Racecar ! Stat write off so track car only Low kms B48cTU engine so has the bigger DI fuel pump which should support 350hp 6 speed Manual Has 18” front wheel and Dunlop semis 90mm wheel studs Airtec Intercooler ( not yet fitted ) Rear Muffler deleted ( Velo seat not included in sale ) But base frame to suit can stay with the car All original interior comes with it JCW Steering wheel Will be a great Supermini build and could be very fast . Does have a bent drivers side

Toyota 86 2013 Scholarship spec. Ready to go in the 2026 season. Good condition with new engine after Rnd 1 2025. Comes with 2 sets wheels, new dunlops, used dunlops, used Hankooks from APC category. Log booked, new gearbox in August. New front shocks as spares, spares to go with it. Well maintained and will come with passenger seat for rude days

Brembo 8 pot calipers/ 380mm discs & pads front; 4 pot calipers/350mm discs & pads rear, with Chev hats ( easily changed for other application). New / never used. Unfinished race car project.

2002 Chenowth Millenium class 10 buggy Rebuilt mitsubishi 4b11 engine making 210hp @9000rpm Albins 6 speed 11.5 sequential transaxle 934 cvs with modena engineering 33 spline axles Link fury ecu and AIM pdm with display and keypad King shocks tuned by MCA suspension with adjustable canisters Howe powersteering rack Gearone mid board hubs Raceline wheels fitted with mickey thompson tyres The car is a competitive with some good results, ready to race the 2026 season To see in action check

Race car transporter can fit 3 cars Dhollandia 2.5 ton hyd tailgate lifter. Top floor is 9.7 mts with 5.5 mts that can be lowered another 300 ml which will give 1500 ml. Bottom deck is 5.5 mts long for cars if work bench’s are removed. Trailer has two double bunks and two single bunks. Shower toilet kitchen and lounge. Fully air conditioned. 240 and 12 volt power This is brand new build by frontline trailers on a vawdrey trailer with bpw air bag suspension disc brakes and 10 stud alloys. 1000

Motorsport Australia Log Booked No 20220118 3E Series Production with full MA Approved ($4500) Roll Cage, 6 x 17" Mags, also 4 x 18" Maggs with a lot of suitable tyres, New fully adjustable coil overs on all corners, 5 speed manual, Race seat, and 6-point harness Electric battery cut out, new fire extinguisher, new large intercooler, ($1200) flash tune, high intensity rain light, motor gearbox etc perfect only traveled 85000Ks the car can be run in Aus Production Car Series, IPRA, Sports Sedan S

This is a great duel purpose car trailer, the enclosed section can be removed in 15 minutes. Being a Single axel it is very easy to manoeuvre, it has just been fitted with new 8ply light truck radial tyres. Internal dimensions as follows, length 3450mm, width 1520mm, hight at front 810mm, hight at rear 1400mm. External dimensions as follows, length 4550mm, width 2040mm. Included in the sale, aluminium loading ramps 3450mm long x 225mm wide, electric winch, ( no battery ) External awning to park

NEW 2025 HNS 6.5m Enclosed Tri axle Internal floor length is 6.45m trailer external full width is 2495mm width between mudguards is 2005mm drawbar length is 1.5m internal height is 2.2m GVM 4500kg Tare 1950kg Chassis and drawbar at 150mm x 50mm x 5mm X 450gr RHS duragal Steel 4mm Automotive spec Aluminum Cladding walls, high gloss white (flexible core) 1pc fiberglass FRP roof LED autolamps tail lights and clearance lights throughout the entire trailer load sharing greaseable suspension ( 620

This Nissan LZ 20 B Works Engine is in parts ready to be assembled. All of the respective parts are in excellent order and are all original Nissan works components. For example, the twin cam head has been fully refurbished by an engineer who is well known for working with rare and historic competition engines. There are numerous photos of the engine and its parts, only a few have been listed. Further photos can be emailed. This is a rare opportunity for an enthusiast or collector who is look

Race Winning Formula Ford Prepped and ready to race. DELIVERED INTO VIC 2024 Season: 4 Race wins 1 Pole 6 Podiums 2 Round podiums Clean sweep at sandown. Race win at Bathurst. Double podium at Winton. 2025 Season: Car ran 2 test days at Symmons plans. Parts: • 2 full sets of wheels Plus extra fronts and rears • Springs, roll bars and ratios for all Aus and Vic Formula Ford tracks PLUS extra used dog rings • 2 nosecones, 1 on car and 1 spare • Spare used brake pads and clutch plates •