143 Holden Holden in Australia for sale

86055 kms on odometer, 6 speed auto in excellent condition! $30,000 ono.

Holden LX Torana 4 Door Complete bare body Shell. All rust removed from body shell, new sills, A pillars, floor, boot, etc etc. Repair invoice available on request. All body deadener removed. Body has been stich welded. Wheel arches not done due was going fit race flairs. Body in bare metal and rust coated. Drivers door slight mark. Body ready for roll cage.

Historic Gemini Coupe Sports Sedan. Originally built by John Brookfield for Peter Brock, circa 1977. Previous owners include Rowan Harman, Robin Doherty, Darren Hossack, Grant Munday, Stephen Craig. ENGINE:- 13B Extend Port FD Series 6, Ceramic Apex Seals, Balanced and matched rotors, custom exhaust manifold, modified inlet manifold, Full Throtle Engineering crank sensor, Bosch Motorsport 2000cc injectors, OS Giken triple plate clutch, Borg Warner 91/74 alloy core turbo, 1.45 twin scroll exhaus

2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg

EX WGR SUPER V8 2001 RACE MOTOR BLOCK BRONZE LIFTER BUSHES NEW JE 4.030 PISTONS,RINGS'PINS,ROLLER LIFTERS,CAM,JESEL CAM BELTS PULLIES,4XBOLT MAIN CAPS,NEW DRYSUMP,FITTINGS,HOSE,PUMP,FLYWHEEL,BALANCER,JESEL ROCKERS,NEW LP MANIFOLD,PUSH RODS HEADS ARE BEAR BUT HAS NEW VALVES ONLYROCKER COVERS,DIZY,WATER PUMP,NEW BIGEND AND MAIN BEARINGS, THIS IS A ALL SUPER V8 PARTS ENGINE. VERY LITTLE PARTS NEEDED TO COMPLETE. ALSO HAVE 2 NASCAR SBC BILLET 350 CRANKS $1,000 EACH AND HOLDEN 308 BILLET

Group A VL Walkinshaw Genuine Twin Throttle Body Intake Mainfold and genuine rocker covers to suit. In excellent condition (taken off near new engine, over 30 years ago). Genuine, original idle control, fittings and hoses. Genuine, mint condition rocker covers (polished). Taken off my own personal group A engine in 1990 and has been owned and stored by myself for over 30 years. Has not been tampered with or ported, in its original state. Still has original thermostat, housing and sensors a

Call Kevin 0418538961 Open to offers. Car is located in Melbourne LJ Torana 2 door Sports Sedan. Only used for sprint days at Sandown Raceway, Melbourne. Motor has only done 2 sprint days since rebuild by Hocking Engineering. Originally cost to build the engine was $30K, 350HP at the wheels Cams approved roll cage Log book 3.8 V6, dry sumped, injection, scat crank, argo rods, roller rockers, heads worked T5 Gearbox Weight is about 1100Kg Fibreglass doors, bonnet and boot lid. Lexen windows P

CAMS LOG BOOKED NO RUST 4 DOOR TORANA BUILT IN MIND OF THE GROUP C A9X APART OF HAVING OVER 500 HP BUILT WITH ALL NEW PARTS GROUND UP. TESTED AT QUEENS LAND RACE WAY 30 LAPS AT 7,000 TO 7.5000 OIL PRESSURE STAYED AT 50PSI 60 TO 70 ON START UP,CAR STOPPED CORNERED DROVE FANTASTIC BRAKE PADS ARE PMU USED HAS CLUB REGO,BUT IS A FULL 100% RACE CAR 308 RACE ENGINE COME RACING BILLET 3.55 CRANK,H BEAM 1.125 RODS,WISCO .020 PISTONS,CLIVE ROLLER CAM,T-BAR CPMP PRO ROLLER LIFTERS,OIL GALLERY DELIVERY

PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l

Brand new triple plate 5 1/2” clutch. Suits Formula Holden AP part no# CP4103AORA Has been in storage for a while but still brand new in box. Can post Australia wide

HMS V8 Supercar short motor. Motor has some new and used parts including new set of JE pistons, some new bearings. Includes a set of rods, crank and cam and other parts as shown in photos. Price is negotiable. Any questions please message.

1986 Holden Commodore VL Sedan Track Car - 3L Petrol - 5 Speed Manual - RWD - 182,071 klms RB30 Stroker (3.4L) Mini Spool VN Axles 5 Point Safety Harness Full Cage Fuel Cell Previously scrutinised.

Commodore Vr/Vs Totally professionally built and still in great condition. Currently has Improved Production Log Book. Race car is sold without engine and gearbox ready for your own transplant for the category. Has fully adjustable independent rear axle, spare diff centre, big brakes, and extensive spares. Race car can be carbureted or fuel injected engine with high tech fuel tank and fuel system. Option for purchase a fully reconditioned complete Holden 355 stroker motor to be assembled and wi

FORMULA 5000 1972 ANSETT TEAM ELFIN (Garrie Cooper) MR5B. This is a piece of Australia motor racing history. 1 of 4 built MR5 ELFIN. (REPCO HOLDEN) This specific MR5B Spec was driven and raced by the legendary Garrie Cooper of the ELFIN fame with CAMS historic car certificate of description and authenticity and CAMS historic vehicle log book (Log Book No. H3026) documenting complete ownership details from new and up to date including its historic racing history. Matching numbers with fully tot

1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers