SSR Enabled
Australia's #1 Enthusiast & Motorsport Marketplace
Australia's #1 Enthusiast & Motorsport Marketplace

27 Porsche for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

All Results

19
Roll Cage
Log Book
Prompted by some rally success, courtesy of “Quick Vic” at the 1966 Tour de Course and the fun fact that Porsche loves racing, the “road use” only 911 lasted two model years, Renn-version free, before Stuttgart’s finest (Namely Herr Huschke von Hanstein) commissioned what was to be, the iconic 911R. Porsche wanted to compete in the sub 2L GT FIA category, they knew that light and nimble were the key elements needed to get the job done and at those points, they shone. Getting the right amount of

Buderim QLD, Australia
Share
Watch
60
Registered
1972 911T As far as enduring icons go, in the Automotive world, the 911 stands out as the king of them all. We don’t need to go into all the details and the history of the 911, so for this very special car, we’ll get straight to the point. Beginning life as a standard 1972 911T, the car we present here has undergone such extensive changes that it remains a 911T only in model designation and basic body shell. With the same owner for just on 20 years now, this car has been continuously campaigned

Mona Vale NSW, Australia
Share
Watch
6
Registered
Log Book
As new 718 GTS 4.0 litre with 7spd PDK auto. Last service 7 Nov 25 by Autowerk Wyong.

Nambucca Heads NSW, Australia
Share
Watch
3
Porsche parts including but not limited to. Fresh Gear box, doors, bonnet, roof with support frame, front guards, front lights, front and rear bumper, fuel cell, carbon rear engine cover small damage, front sub frame, full set of new radiators and much more any parts needed just reach out. Also have complete car for sale as surplus to requirement. All parts are currently in NZ but can be easily sent over. I am based in South Australia.

Roxby Downs SA, Australia
Share
Watch
16
I have a bunch of Cup Car Parts for sale as follows. • 2 sets of 997.2 Forged factory 1-piece rims $4000 per set • 1 set 0f 997.2 BBS 3-piece rims $3500 • 2 sets 997.1 rims with wider rear inner section to run 997.2 tyre $2500 per set. • 1 x 997 bonnet Used $700 • 1 set new 997.2 factory rear wing uprights $600. • 1 x 997.2 replica rear engine lid $800 • 1 x 997.1 factory engine lid $1000 • 2 x 997 Cup S replica front Guards $1800 • 1 x 997 Cup S replica front Bar $1500 • 1 x 997.1 LH factory Cu

Lilydale VIC, Australia
Share
Watch
4
Set of 4 unmarked Porsche Spyder style Alloys 20" Front, 21" Rears To suit a 992.$4900 the Lot.No Tyres, Unmarked,Genuine Porsche 992 Wheels.Grey,Photos attached. NB Porsche Centre will sell a new set at $16,000 & that is with a 15% Discount.

Palm Beach QLD, Australia
Share
Watch
4
I am selling several models of Kugelfischer PL06 pump for 6 cylinder engines. Ideal for slide throttle. Mounting on BMW M30, M49, M88, M20, Porsche SCRS and 935, Ford Capri, Alfa GTV ... N/A and turbo engineI sell several models of Kugelfischer PL06 pump for 6 cylinder engines. Ideal for slide throtlle. mounting on BMW M30, M49, M88, M20, Porsche SCRS and 935, Ford Capri, Alfa GTV ... atmospheric and turbo engine. Pistons diameter 7.5 8 8.5 and 9 mm camshaft 2.2, 3 and 4 mm

Rioz, France
Share
Watch
2
1 bolt-in front section of Roll cage for Porsche GT4 981 or 718 (not RS) road car with Clubsport spec. This is in its original box/crate from Porsche and is OEM and has never been fitted. Fully DMBS and CAMS approved. Original cost $10,000.

Brookvale NSW, Australia
Share
Watch
12
Roll Cage
1 off race car built to stop and go around corners. This is the only car in Australia as I have the molds Nothstar 4.6 lt 6 speed Porsche gear box 8 itb Haltec ignition Koni inbound suspension Cams approved roll cage Much more Car is not registered track car only or promotional vehicle

Wellington Point QLD, Australia
Share
Watch
2
Two sets of 911 Plates for sale - one set "9114ME" at AUD$20,000 and one set "A911ST" at AUD$30,000

Newtown VIC, Australia
Share
Watch
20
Registered
Roll Cage
Built in 2023 for the Perth to Sydney Classic Rally Tour of the same year. Careful attention to modifications so that vehicle could always be returned to a standard original GT4. Vehicle has never been raced or entered in a timed event only classic rally tours on public roads and has never been crashed or damaged. Tens of thousands of dollars spent on new and reconditioned components to make vehicle as reliable and refurbished as possible. Vehicle is in excellent overall condition with nothing t

Catherine Hill Bay NSW, Australia
Share
Watch
4
AUTOart RIMS OFF MY 997 GT2. UNDAMAGED & COMPLETE WITH PORSCHE WHEEL CAPS MODEL VYC 18 SPECS IN PHOTOS 2 & 3 PICKUP BRISBANE OR CAN SHIP WORLDWIDE AT COST

Newport QLD, Australia
Share
Watch
12
SOLD...SOLD...SOLD...SOLD...SOLD PARTS FOR SALE: Front splitter complete, Bonnet new, Plastics, car sets of new GKN driveshafts ( Blue, Green, Red, Orange ), car set BBS wheels with new Michelin tyres fitted, new bonnet, second hand headlights and tail lights, new plastic undercar floor ( most pieces ) lots of plastics and brackets and more!

Braeside VIC, Australia
Share
Watch
5
Car set of fully maintained BBS 997.2 Cup Car 3-piece wheels. $3495 Also a new set of unused Michelin wets. $1995

Braeside VIC, Australia
Share
Watch
10
PORSCHE 996/993(964/944) 18 INCH BBS GT3 RIMS IN TOPCONDITION 7,5jx18 et 50 10jx18 et 65 These Nice Rims fitted under a Porsche 996/993 Narrow Body ,and with spacers rear from 10 mm under a Porsche 964 and Porsche Model 2

Esperance WA, Australia
Share
Watch
1
18"x 12" ET45 Satin Black APEX SM-10 Porsche Wheels (Set of 4) Unused but had tyres fitted and got a few minor scuff marks when they were removed.

Hume ACT, Australia
Share
Watch
3
I have for sale a rear body clip of a Matich SR3 In very good condition Been modified above engine cover to suit Porsche motor, but easily returned to standard. I also have the mold for original SR3 rear clip for sale separately.

Sydney New South Wales, Australia
Share
Watch
3
H2O-LOL. Water???? Laugh out loud!!! Tell the world where you stand on the whole water cooled - air cooled debate! Brand new plates...never mounted.

Bentleigh East VIC, Australia
Share
Watch
5
Used for 18 months - Pristine condition Never tightened with a rattle gun, always hand tightened. Purchased new from Porsche for $2k. Always greased with the right product. Will sell for fixed price $1050 for all 4 centrelocks and post anywhere in Australia.

Winston Hills NSW, Australia
Share
Watch
3
Light use over 2 years - Manufactured in 2022. Am first owner. Flawless wheels - no cosmetic or functional damage anywhere Has only been installed by-hand Uses a centrelock mechanism Near-new porsche centrelocks are available for additional cost. sizes are 19" x 9" for front and 19" x 12" for rear sets. Colour is gloss race gold Each wheel retails for $2700 + freight. Are open to offers on price - please contact for reasonable offers https://forgeline.com/wheel/ss1r One-Piece Forged Monobloc

Winston Hills NSW, Australia
Share
Watch