27 Porsche Parts, Accessories or Other for sale

On offer are genuine Porsche Boxter 968 spare parts & G86 6-speed transmission set. PE Racing is an Australian Motorsport component Designer & Manufacturer specialising in Competition-grade Motorsport components. On behalf of our Client, these items from an Unfinished Project are available at a bargain price. Here's some additional details, refer photos: Boxter 6 speed G86 Transmission, Trans-axle, $2000 Steering Rack, $500 Steering Wheel, $100 Dash cover & Heater Box, $600 Transmission Shif

On offer are Porsche Cayenne headlights in reasonable condition. Suit Porsche Cayenne S 958 HEADLIGHT LEFT & RIGHT SIDE ASSEMBLIES As per photos, minor damage is seen to underside, likely caused while being removed. PE Racing is an Australian Motorsport component Designer & Manufacturer specialising in Competition-grade Motorsport components. On behalf of our Client, these items from an Unfinished Project are available at a bargain price. Looking to sell entire package, but may consider separat

Complete 6.2L LS3 426HP Crate Engine & Transaxle kit. Holden V8 LS3 6.2L VE VF HSV GTS Clubsport MALOO SS SSV Near new with upgraded cam, only 10,000km. PE Racing is an Australian Motorsport component Designer & Manufacturer specialising in Competition-grade Motorsport components. On behalf of our Client, these items from an Unfinished Project are available at a bargain price. Looking to sell entire package, but may consider separating some items. Motor comes fitted as in photos with: Power s

On offer are major & minor components (spare parts also available) for building a Mid-Engine Road Race, Formula or Kit Car of your dreams using quality Branded parts. V8 Engine, Transaxle, Suspension Parts, Big Brake Kit, Wheels, Dash, Heater Box, Steering Column, LED front & rear Lights & various other Accessories. Looking at a bundle price of $45,000, reasonable offers will be considered. Spare parts are also available separately as described. PE Racing is an Australian Motorsport component D

Complete passenger setup pulled from a 991.2 Porsche Cup car. Only sat in 2-3 times on ride days — effectively unused. Included: Racetech race seat (FIA, HANS-compatible head cutouts, head wings) Schroth FIA harness — 8853-2016, valid until 2028 Schroth SR interior window net — FIA 8863-2013, valid until 2028 Seat rails / sub-frame as pictured Perfect for track car, Cup car ride seat, or club racer wanting a fresh-dated harness and net without the new price. Everything in genuinely excellent c

MA approved 6 point bolt in roll cage. Fabricated by Jason White at Whitehot Motorsport. Very close fitting for maximum cabin space.

Genuine factory Fuch Alloy Rims $3200.00ono Two 7x16 and two 8x16. Very good clean original factory rims, with minor blemishes. These rims have not been refurbished, allowing the new owner to decide how they want the rims be presented. Original wheels from 1986 3.2 Carrera. Suit 1980’s Carrera 3.2 or similar. Oz Racing rims Ultraleggra HLT $3,000.00 ono Two 8.5x19H2 ET49 and two 11x19H2 ET40. Excellent condition, suit 996 or similar.

For sale is a complete set of genuine (and rare) KW Competition 3A EXR (external reservoir, 3-way adjustable) coilovers specifically built for the Porsche 997.1 GT3 RS. These were professionally stripped, serviced and rebuilt in March 2026 by Racing Shocks Australia (new seals, fresh oil throughout). All four dampers were then dyno-tested on their in-house rig and the full set of reports is included (front & rear, every combination of LSC/HSC/Rebound settings – graphs attached). Ready for track

Porsche parts including but not limited to. Fresh Gear box, doors, bonnet, roof with support frame, front guards, front lights, front and rear bumper, fuel cell, carbon rear engine cover small damage, front sub frame, full set of new radiators and much more any parts needed just reach out. Also have complete car for sale as surplus to requirement. All parts are currently in NZ but can be easily sent over. I am based in South Australia.

I have a bunch of Cup Car Parts for sale as follows. • 2 sets of 997.2 Forged factory 1-piece rims $4000 per set • 1 set 0f 997.2 BBS 3-piece rims $3500 • 2 sets 997.1 rims with wider rear inner section to run 997.2 tyre $2500 per set. • 1 x 997.1 LH factory Cup Door $3000• • 997 Cup Brypar – New front and rear disc rotors (no Hats) $2000 • 997.1 Rear BBS rim $700 • 997.1 BBS front and rear outer rims $300 each • 997 Cup Hollinger Gearbox $25,000 • 997 3.9L Cup Car Engine – hear in car running w

I am selling several models of Kugelfischer PL06 pump for 6 cylinder engines. Ideal for slide throttle. Mounting on BMW M30, M49, M88, M20, Porsche SCRS and 935, Ford Capri, Alfa GTV ... N/A and turbo engineI sell several models of Kugelfischer PL06 pump for 6 cylinder engines. Ideal for slide throtlle. mounting on BMW M30, M49, M88, M20, Porsche SCRS and 935, Ford Capri, Alfa GTV ... atmospheric and turbo engine. Pistons diameter 7.5 8 8.5 and 9 mm camshaft 2.2, 3 and 4 mm

1 bolt-in front section of Roll cage for Porsche GT4 981 or 718 (not RS) road car with Clubsport spec. This is in its original box/crate from Porsche and is OEM and has never been fitted. Fully DMBS and CAMS approved. Original cost $10,000.

Two sets of 911 Plates for sale - one set "9114ME" at AUD$20,000 and one set "A911ST" at AUD$30,000

AUTOart RIMS OFF MY 997 GT2. UNDAMAGED & COMPLETE WITH PORSCHE WHEEL CAPS MODEL VYC 18 SPECS IN PHOTOS 2 & 3 PICKUP BRISBANE OR CAN SHIP WORLDWIDE AT COST

SOLD...SOLD...SOLD...SOLD...SOLD PARTS FOR SALE: Front splitter complete, Bonnet new, Plastics, car sets of new GKN driveshafts ( Blue, Green, Red, Orange ), car set BBS wheels with new Michelin tyres fitted, new bonnet, second hand headlights and tail lights, new plastic undercar floor ( most pieces ) lots of plastics and brackets and more!

Car set of fully maintained BBS 997.2 Cup Car 3-piece wheels. $3495 Also a new set of unused Michelin wets. $1995

PORSCHE 996/993(964/944) 18 INCH BBS GT3 RIMS IN TOPCONDITION 7,5jx18 et 50 10jx18 et 65 These Nice Rims fitted under a Porsche 996/993 Narrow Body ,and with spacers rear from 10 mm under a Porsche 964 and Porsche Model 2

I have for sale a rear body clip of a Matich SR3 In very good condition Been modified above engine cover to suit Porsche motor, but easily returned to standard. I also have the mold for original SR3 rear clip for sale separately.

Used for 18 months - Pristine condition Never tightened with a rattle gun, always hand tightened. Purchased new from Porsche for $2k. Always greased with the right product. Will sell for fixed price $1050 for all 4 centrelocks and post anywhere in Australia.