21 SEAT Car, Bike or Kart in Australia for sale

1999 Lexus IS200, now an IS600 with L98 Chev 6 litre V8 (ex VE SS) rebuilt 2022. Lots of info available about internals, but briefly has forged pistons, H beam rods, Crow street cam, tuned to a mild 375 RWHP. T56 transmission with short shifter and IS300 diff. Canton 7 litre baffled sump. Car originally built by Mark Palmer at C Red. Fully registered, engineered and has permits for engine and trans. Willwood 4 piston calipers on front with 323mm Supra TT ventilated discs. Expanded calipers on re

Looking for the ultimate combination of power and style? Look no further than this 2007 Ford FPV F6 Typhoon BF MKII. One of only 300 examples ever produced. The F6 R-Spec Typhoon achieved its intent with a bespoke suspension setup, specifically tuned to the mass of the six-cylinder super sedan. Front damping rates were a key focus, the goal to improve turn-in response while retaining ride quality. ‘Dark Argent’ ss19-inch alloys and a rear spoiler lifted the exterior, along with specific badging.

Muscle Car Warehouse are proud to offer for sale this 2002 Ford AU Falcon Pursuit 250 Ute with only 39 kilometres!! Never registered and kept amongst private car collections from new. One of just 248 examples ever produced each with their very own hand built 5.6 litre stroker Windsor V8 engines. This one finished in Silhouette Black and leather trim with factory optioned Brembo brakes and hard lid tonneau cover. Still has pre delivery plastic on the driver’s seat and carpet along with the steer

One of the original 4. Includes over $40k of spares (Will not separate). Lightweight 1220kg, Biggest brakes in Group N. Fibreglass front and rear fenders, bonnet, doors, boot and bumpers. Dennis Johnson built 289ci. 1 meeting old. 400++ ftlb, 500+ hp - Dyno sheet to purchaser. Ford Motorsport 302 Boss 4 bolt competition block, steel crank, RHS heads, Jesel valve gear. Jesel external adjustable Belt Drive. Canton Auccusump with auto-valve. System 1 -12 oiling system. Pro Sys custom (Holley) 4 ba

ford Mustang GT Mach 1 built by Ryan Mcloed was on pole for 2022 Bathurst 6hr it has 4 camera system Sparco seat on Ricaro adjustable slide 100 ltr premier fuel cell FAI approved Brembo billet brakes 378 Brembo rotor modified rear brake calipers with floating rotor Murray Cootes Gold shocks big range of eibach springs included new Mach 1 spec engine with boundary oil pump Mahle pistons Manley rods psi valve springs epoc multi angle valve job ATI balancer dynoed by roger Higgins new Suncoast 10

Ford Falcon EL race car, fully stripped interior, cage, race seat, quick release wheel, fuel cell in boot, 6 pot AMG front brakes and 4 pot brembo rear brakes, straight 6, 4lt, fresh 5 speed box. Car used for budget enduro events. Includes spare engine and other mixed spares. Rear brake bias adjustment added.

1973 Ford Mustang Race Car LHD Full Roll Cage Rebuilt Hercules 351 V8 Engine (started, Never Raced) Top Loader 4 Speed Gearbox 9-inch Diff 18-inch Wheels and Tyres 6Spot front brakes large disc. The body is made of full steel, with no rust or bog, and all gaps are spot on; there is no evidence of it ever being in an accident. Has a Race seat. It doesn't need much more to get it on track. All new shocks and sway bars, New Exhaust system, has a new Petrol Tank 4 Near New Yokaharma Ao50s.

This 2013 Ford Mustang Boss 302 ‘Laguna Seca’ is 1 of 262 manufactured by Ford in School Bus Yellow and 1 of 765 manufactured by Ford world wide (with 2 known to be in Australia with this Laguna Seca being one of the last 22 produced). This Laguna Seca currently has 13,146kms from new and has been served every 12 months regardless of use. This Laguna Seca was delivered with the Boss 302 car cover, Boss 302 floor mats, front splitter, red track key, owner pack including a letter from the Ford P

1 of only 300 ever produced, all identical. All in Ford Performance Red, lightweight, radio delete, rear seat delete, air con delete, sound deadening delete, factory fuel cell, all here noted factory specific to 2000 SVT Cobra Rs 1st with 5.4 quad cam V8, first with 6 speed gearbox, 1st all independent suspension, Borla exhaust [factory side exit] Bassini x pipe, Bilstien shocks, Brembo 4 spot caliper brakes, higher pound springs, Recaro seats, Cobra R Binder/compendium irreplaceable, speciali

FM mustang GT with Mach1 upgrade 3E production car built professionally by Ryan Mcloed Racecar's in 2021 car had 10000 km on road now has 15000 km it has a new motor done 350 km onlywith Mahle pistons Manley rods bowndary oil pump heads done by KRE with psi valve springs dynoed at roger Higgins with excellent power has Suncoast transmission cost 20k bullet proof the car has Brembo race brakes premier 100 ltr fuel cell Murray Cootes gold gas shocks Eibach springs big sway bars new gikon diff pwr

Improved Production Log Booked 3J AU Falcon XR8. 347 Stroker built by Ierace Automotive in 2024. EFI Hardware ITB with custom CAI, custom side exit exhaust. Haltech Elite ECU, IC7 Dash, GPS Speed input and Tyre Monitoring System. IRS rear end with 4.11 Diff, Shockworks coilovers all round, Front brakes Stoltz FEX4 350mm rotor with Territory rear brakes. Brad Stacey weld in cage, Cobra evolution seat, Quick release steering wheel with RPM Sportline wheel. Enkei RPF1 18" wheels and currently

FN 2020 Mustang Production Car - MA 2024 log book. BRAND NEW BUILD Built originally to compete in 2024 B6H but due to circumstances the vehicle did not compete and has never been raced or put on track. Still has plastic on seats, steering wheel etc. Complete turnkey vehicle ready for competition - prepared to the highest standard by RM Racing cars with no expense spared. Inclusions: - 10 Speed Automatic Paddle shift - PWR Radiator and Transmission Cooler -50 Row engine Oil Cooler - 3’ Sta

For sale is a Ford Ranger Raptor in Velocity Blue, purchased brand new in March 2024 ($92,000), only driven from Melbourne to Adelaide – approx. 1,200kms – never raced. PLEASE NOTE: Build is currently at $240K spent. Seller is open to offers. With absolutely no expense spared, project managed and built by highly reputable parties - the original intention for the vehicle was to build and race in the Production Class of the AORC. The vehicle is currently in an unfinished project state, stripped

Please email to discuss offers Repainted in Mazda yellow Lexan windows Gt carbon fiber wing Carbon fiber wing uprights Carbon fiber front splitter Cds steel weld in roll cage 18x7.5 front 18x9 rear wheels Yokahama advan Ao50 tyres Adjustable front camber arms MCA red coil overs with custom valving and spring rates. Is300 diff and half shaft upgrade Ft86 torsen diff 4.3 Porsche 997 cup car brake upgrade 365mm rotors Circo front pads Project mu rear pads Tilton floor mounted pedal box E

2006 Ford Fiesta XR4 150K KM 12 months rego from Thursday 14 March Body and paint is good and presents very well, few stone chips as expected, front bumper needs a paint Interior is excellent condition, won't come with the Sparco but will include the seat base if needed. The original seat will come with the car and fitted. I have a brand new rear boot badge and rear vision mirror to fit + Cosworth Cams + Cosworth manifold (genuine) + 4-1 Miltek exhaust + Larger upgraded throttle body +

Ford 1 Tonner drag Ute Full rollcage B&M Shifter Autometer Gauges Autometer Shift Light race seat & 5-point harness Hoosier Rear Slicks Upgraded Rear end. Upgraded Tail Shaft Comes with many additional spares. Contact Karen for more details