148 box in Australia with Roll Cage for sale

Sports sedan 3D log booked 1020kg w/o driver 450whp National spec roll cage with front tower reinforcement, tubbed front and rear arches and custom front end crash bar K24 2.4L engine swapped with K20 custom ported head, Pistons, rods, balanced crank, cams, valves and springs. MCA custom valved shocks by DNA motorsport Full rose jointed suspension arms Motec suite of electronics with full milspec re-wire by Prowire with DBW throttle w/flat shift Custom ratio 6-speed dog box with Hollinger loa

For Sale: Fully Prepared Race-Ready 1999 X3 Hyundai Excel This Excel has been modified for track performance and reliability, making it the perfect package for club racing or track day enthusiasts. No corners cut—every component is geared toward performance, safety, and handling. Key Features & Upgrades: Exterior & Safety: Fresh, striking new paint Wiper and washer delete AGI bolt-in roll cage Hood pins & tow points Window net for driver safety Driver Setup: Cobra race seat with RPM 6-

Circuit Sports car racing or Hillclimb machine Motorsport Australia Log Book. Multiple class and race winning Ian Davis designed and built race car. Built based around components from a Lotus Elise sports car. Lotus /Toyota 1.8 Litre fuel injected engine with a Subaru WRX Turbo coupled with 6 speed transaxle operated gear box. 2014 -2018 inclusive State Motor Racing Championship winning race car. Car has since had limited use however has maintained to be a front running vehicle up against many s

This car was built for racing & has just undergone a full rebuild including; New 590hp engine, new Muncie race box. Detroit locker diff. New rear axles. New brakes & the list goes on. It has all the best gear & has won loads of races over the past 15 years. Full list of inclusions; 12 wheels, inc. wet-weather tyres. Spare gearbox. Spare locker. Axles. 4 Diff ratios. Discs & linings. Drums, Wheel cylinders.

Offered for sale is an exceptionally rare opportunity to secure a genuine Ford Falcon AU V8 Supercar with rich Australian touring car history, including a spares package worth in excess of $50,000. This outstanding Ford Falcon, chassis AU41298 (often referred to as JBMS 000), was built new in late 1998 by On Track Engineering under Peter Beehag and debuted in 1999 by John Briggs Motor Sport in full Supercheap Auto livery—a look so iconic it was chosen as the retro tribute for Chaz Mostert’s #55

Toyota Corolla AE71 (C2 classic) 3SGE 16V gen III (2 events since rebuild) High compression Billet crank, forged pistons and rods Big custom rally camshafts from billets. Dry sump with oil cooler High flow cylinder head with oversized buckets and valves to suit camshafts. Jenvey 48mm throttle bodies with 750CC injectors. ECUmaster Black ECU and PDM Professionally wired. Driveline: Tractive 5 speed sequential 7.25-inch twin plate AP racing clutch AP racing concentric slave cylinder Race produc

Tarmac Rally Car Very good condition with heaps of goodies some include, KW canister suspension Motec M800 Motec C123 dash Motec Diff controller Built motor, 340KW on E85 Gt pumps high flow turbo Plasma man intercooler Loads and loads of spares available if wanted and various gearbox options from sequential, dog box or synchro, price is based on synchro gearbox. Car had lots of success in Targa events winning outright events as well as the outright record holder at various hillclimbs includin

Selling my 2000 1.8 Turbo U3L IPC beetle. Can be left as an IPC car with turbo restrictor or you can take the restrictor off and put into the street car category or targa rally car. List of parts below: 1.8 20v, small port intakes, OEM forged internals.Turbo engine out of a GTI MK4. KW coil overs, fully adjustable. ECS engine mounts Brand new steering rack Brand new Xtreme button clutch Brand new DBA rotors and MU project pads. Targa compliant (national) role cage by Brad Stacy. Motorsport A

Freshly Tuned and Refurbished engine Trailer INCLUDED Brand New Brake Rotors and Calipers Multiple Podiums and Fastest Racing Laps 3 sets of wheels, with tyres Water Resistant Superlight Trailer Huge Spare Parts Package, boot housings, wheel hubs, Calipers, brake pads, Steering Box, Full Set of Carby Jets Full Logbook Full History Compatible with any Data System South Australian Built Chassis Ready to Race Package Selling due to Career Progression,

Ford Capri full Touring Car Masters specification and homologation. Ford Windsor 302 with CHI heads dry sump with all the best bits built by Fataz competition engines, I can supply a parts list of everything that has gone into the engine. The engine has done 2 test days and one race meeting at SMP in 2024 and started on the front row in the hands of Rylan Gray. It comes with the following *Tilton racing clutch *Tuned headers and pipes built by exhaust innovations *Spare Radiator *Various spar

Hi, Selling this beautiful RX7 which offers so much. The car is IPRA log booked and has only completed an extremely low number of events and a handful of practice sessions etc. Fully seam welded chassis to specification Adjustable springs all round (Eibach) Noltec adjustable spring upper mounts Custom fabricated Watts link rear Adjustable stabiliser bars Series 3 diff and axles but with a Mazda Factory Racing LSD diff centre Alloy foam filled fuel cell Front Brakes 296x28mm 5000 rotors with Will

EvoX based Hyundai i20 G4 Rally car as driven by Troy Dowel in the Australian Rally Championship in 2022 winning 3 podiums. Holinger 6 speed sequential gearbox with paddle shift. Brand new engine rebuild and turbo, full custom subframes and arms, vertical intercooler and radiator. AP pedal box with Brembo brakes. Car has only competed in 11 rallies and was the most reliable car in the 2022 Australian Rally championship finishing in the top 5 in every round bar 1. Car is like brand new and except

Up for sale is one of my Pulsar track cars. Basic rundown of the car: - N14 SSS hatchback - SR20DET from a bluebird turbo (not de+t) - ACL race bearings - 5 speed manual box (not LSD) - Exedy HD clutch - Yellowspeed coilovers all around - N15 SSS front brakes with winmax W5 pads - s14 rear disc upgrade + caliper adapter - N15 lower control arms - Weld in Half cage - RPM harness - Cobra seat - S14 T28 turbo - 555cc injectors - Surge + 044 - FMIC - NISTUNE ecu (tuned to 170fwkw on 11psi on ded

Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car

FM mustang GT with Mach1 upgrade 3E production car built professionally by Ryan Mcloed Racecar's in 2021 car had 10000 km on road now has 15000 km it has a new motor done 350 km onlywith Mahle pistons Manley rods bowndary oil pump heads done by KRE with psi valve springs dynoed at roger Higgins with excellent power has Suncoast transmission cost 20k bullet proof the car has Brembo race brakes premier 100 ltr fuel cell Murray Cootes gold gas shocks Eibach springs big sway bars new gikon diff pwr

1 off race car built to stop and go around corners. This is the only car in Australia as I have the molds Nothstar 4.6 lt 6 speed Porsche gear box 8 itb Haltec ignition Koni inbound suspension Cams approved roll cage Much more Car is not registered track car only or promotional vehicle

Original SS camaro race prepared in 2020 by MCE Motorsport including approved roll cage and harnesses chassis improvements and Log booked as 3D Sports sedan/TCM. Eligible for other classes inc Street Cars & Commodore cup etc Brand new eng. installed with upgraded T56 Magnum transmission. Sept. 2021 eng replaced with brand new Chev performance strengthened alloy LS3 6 bolt block, Callies Forged crank and rods, SRP alloy pistons (11.5 comp.) Racetech Balancer, ARP main & rod studs, Crow 1.60 li

For Sale Excel race car Current Spec Supashocks suspension Poly bushed Brown Davies State level roll cage Winmax 6.5 brake pads Current Spec Dunlop tyres Sparco Grid 2 race seat Sealed fuel pump Short shifter Fuel Pressure regulator Alloy catch can Whiteline Rear Sway bar Braided Brake Lines 6 Point Harness GoPro mount Battery Box with provision to charge Go Pro Spare set of wheels Some spares Jerry cans Trolley jack Axle stands Spare brake pads (Brand New, 2 sets) Dorian lap timer included in

1978 Alfa Romeo Alfetta sedan racecar. A very well known and very successful 2.0 car, conceived and built originally by Mike Halasz here in Queensland. Full original build thread available. The sedan shell was used, as it's a slightly longer wheelbase and also quite a bit lighter than the usual coupe GTV Alfetta'shell. We acquired the car about 3 years ago as parts basically and have completely rebuilt it into a very competitive 2.0 car in the Queensland Alfacomp. For 2025, the car is current