35 car Open Trailers in Australia for sale

Car trailer for sale with July 2027 rego This trailer is brand new, never been used. Suit small to mid-size car, deck is 4m x 2m, overall is 6m x 2.5m. Dual axle. Tare 700 kg, GTM 2000kg Built in July 2025 by AusTrailers Fresh 2 pack blue paint with Raptor coat on the runners and ramps. Everything on this trailer is new, axles, bearings, hubs, electric brakes, jockey wheel, coupling, lights and wiring, 5 new wheels and tyres, and 8 tie down points. Now has July 2027 rego If you have any genuin

Single Axle Tilt Trailer with strong winch for sale. Maintained very well and always kept under cover in warehouse. Very light and nimble to move around even with a one tonne race car on top. dimensions are approximately. 4.9m long x 2.3m wide Call Danny for inspection on 0439 314 154

RaceKing Car Trailer+ ali stone guard, spare wheel+wheel holder, additional led lights & licensed. It lowers to the ground for safe loading without ramps, manufactured in Australia. Weighing in at just 350kg. Fully hot-dip galvanized frame for ultra long life Precision fabricated from laser cut Aust steel Lowers to less than 4 degrees of loading angle without ramps or tilting Removable draw bar for minimum trailer storage space Raises to elevated vehicle maintenance position with safety link St

Excellent condition, hot dip galvanized, registered till 31/3/27 Tray 3.65 x 1.8m

Custom-built trailer designed to run behind a tilt tray or 2500. Built for regular interstate work and has travelled the east coast weekly for the past 12 months without issue. Specs: • 9m long x 2.5m wide • Currently rated to 4.5T • Built with future air-brake upgrade in mind (currently electric brakes) • Chassis rails: 200 x 100 x 6mm • Drawbar: 100 x 150 x 6mm • Car carrier plate down both sides • Chequer plate centre • Chain plates throughout • Recessed posts for removable rails • Under-f

Car Trailer For Sale (suit medium sized cars): 4020mm usable length tray 1770mm usable width tray Weight 700kg Max Carry 1300kg New Brakes Custom Wheel carrier Custom Jerry Can holders HD Tie downs added Winch included

Dual axle beaver tail car trailer with ramps. Large nose cone/tool box/spares storage. LED lights, battery charger, 12 volt winch, spare tyre storage. 14” ford stud pattern, disc brakes on front axle. Tare 660kg GVM 2000kg Deck length 4.3mts, 1980mm between guards. All in excellent condition. Tows good, reg till Feb 2027

Custom small car trailer with secure tool and equipment storage ... pre load all of your tools and equipment so you can hook up and get going on the morning of your event .... Keep everything secure for those overnighters Tandem 2800Kg- beaver tail, electric brakes with brake away unit - separately switched rear-front-canopy lighting- on board battery/vehicle charging - electric roller shutter, electric winch, trolly jack holder, access ramps for toolbox, lock and load tie down system, safety

B.M.I. CT 32 FF Open Car Trailer – 3.2t ATM (Full Floor) The standout feature of this trailer is its fully galvanised, anti-corrosion body, delivering a strong yet lightweight construction designed to perform and last—even on rough road surfaces. With its airbag supported tilt function, loading ramps, and low fenders, this trailer allows for easy loading, including very low vehicles. The load-sharing suspension with integrated shock absorbers ensures excellent towing stability while protecting

B.M.I. CT 20 HF Open Car Trailer – 2.0t ATM (Half Floor) AUD 10,999 incl. GST The standout feature of this trailer is its fully galvanised, anti-corrosion body, delivering a strong yet lightweight construction designed to perform and last—even on rough road surfaces. With its tilt function, loading ramps, and low fenders, this trailer allows for easy loading, including very low vehicles. The load-sharing suspension with integrated shock absorbers ensures excellent towing stability while protec

A very unique one-off eye-catching sleek designed car or machinery trailer is offered for sale by Lockyer Trailers. An exceptional craftsman built, robust trailer with no expense spared. Finished in dark charcoal Raptor coat for extreme durability, combined with sections of coloured composite aluminium panelling to create a striking and appealing result. The aerodynamic design of the front protection cone system provides an extremely fuel-efficient towing trailer. Loading ramps integrated into

Custom built hydraulic tilting car trailer. AL KO 2000kg IRS (independent rubber suspension) torsion axles equiped with electric brakes and mechanical hand brake. Compact electric/hydraulic power pack with hydraulic cylinder for tilting with push button activation. 1800kg electric winch. Alloy checker plate floor with alloy ramps that stow away under rear of trailer. Anderson plug provided for battery connection to vehicle for hydraulic and winch operation. Recessed anchor points. Work light. Fr

1 Owner, Custom made 4.8m x 2.01m wide deck, 780kg Tare weight, GVM of 2.8T with 2.1m lockable ramps, 6000lb winch & deep cycle battery stored in the double ended toolbox included. The right guard is removable so a forklift access from the side, very handy for utilising the trailer for virtually anything. Tie down track system works great for low profile race car splitters.

Hydraulic drop trailer remote controlled withe remote and winch making it easy for one man to load and unload racing cars formula cars or anything else with ease. Can custom make comes with reverse camera.

NPR 350 Auto 2005 Isuzu Rigid Light Truck Tray back approx. 5.5m long with electric car winch and ramps. Spare race wheels rack and storage boxes Electric air jacks under tray to lift up and down to suit Automatic transmission Registered to 14th February 2027 in NSW 312000KM Must Sell Urgently no longer required as I have sold the race car separately

selling my car trailer as it is no longer needed heavy duty beaver tail car trailer bed length is 5.2 meters long overall length is 7.4 meters long 1890mm between guards 3 meter long ramps tare weight is 860kg and GVM of 3000kg has a 12000 ibs winch and a DC dc charger fitted and also a solar panel to keep battery charged fitted with 14 inch wheels with 12 inch wheel eclectic brakes on all four wheels with Landcruiser 6 stud patten and parallel bearings 12 months rego hasn't don

TraKspecTM️ Tilting Car Trailer | 3.2T ATM Proudly Australian Designed and Manufactured. PEACE OF MIND * ️ Warranty: 12-Month Structural Warranty included. * ️ Quality: Engineered to exceed VSB 1 (Rev 6) & 100% ADR Compliant. * Custom Colours: Included in the price for all new build orders. AVAILABILITY & STOCK * Teal TraKspecTM️: SOLD * ⏳ New Builds: Currently a 3-week turnaround. SPECIFICATIONS * ATM: 3200kg | Tare: 1000kg | Payload: 2200kg * Deck Size: 4800mm x 2030m

Buggy or car trailer. Multi use trailer with rooftop tent. Trailer no longer needed as we have stopped racing buggies. Tows really well. Full slide out BBQ and sink. Fridge included. Plenty of storage and lighting. Has a hot water service for a shower. 120lt water storage, winch, Brand new brakes and new wheels and tyres. Just spent $12000 upgrading everything. Can fit 1 buggy and 3 dirt bikes. Price Negotiable.

‘’BRAND NEW’’, NEVER USED CUSTOM MADE BMF ( Bendigo Metal Fabrication ) Car Trailer 4500 Ton rated punch flooring for easy tie down winch battery charger aluminium ramps L tray 6700 m, overall 8550 m , wide 2460 This Trailer Has NEVER Been Used Idea for Large Cars or Machinery.

No expense is spared when we manufacture a Gold Platinum Tilt Trailer. We combine rugged ramp-less tilt design with a Soft Ride Independent Suspension System. All components used are of the highest quality Single Torsion Axle 2000 kg ATM - $8999 Single Torsion Axle 2200 kg ATM - $9499 Tandem Torsion Axle 3000 kg ATM - $10999 Tandem Torsion Axle 3333 kg ATM - $11999 KEY FEATURES 8 Degree Approach Angle Ramp-less Design Gas Strut Assisted Tilt Removable Wheel Guard for Low Cars Soft Ride Indepen