24 Circuit Racing for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
14
Roll CageLog Book
1970 Mini K 3D sports sedan First log booked 15th March 2010 built and raced by owner only custom sub frames Honda B16A 1595cc naturally aspirated Fresh motor 5 speed transmission - LSD 4 pot front brakes/standard rear brakes with vented brake drums coil over shock absorbers and Rose joint counter arms Perspex windows bond steel roll cage approved 6 point harness (SCHRUTH) SABELT race seat 13 inch 8.5 historic mullins race wheels fiberglass front nose cone and boot and front and rear bumper bars
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
20 1
Roll CageLog Book
For sale is my logbooked CSV Mondo GT mock up (Holden Monaro) 3E Production car - Homologation document 3-16-001. Also suitable for 3J Improved Production IPRA as logbooked naturally aspirated 3E cars are eligible as is. This car previously competed in multiple Bathurst 6 Hours which is why I bought it, only for it to be taken off the eligibility list a few months later, hence why I am selling it. Can be converted to HSV GTO which is still eligible. Car is extremely well built and features an
6
Roll Cage
Holden Monaro CV8 Rolling Shell Car has been caged for many years and after talking to officials doesn't need much to be compliant with current times. Bought it with the vision to build but unfortunately this has come to plans.
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
13
Morris Mini Cooper S . Replica, 1967 Morris Mini Cooper S replica has all the attributes of a genuine Cooper s inc 1275cc motor , 4 speed gearbox, disc break front end , twin tanks, with tabs, boot board , 120 mph speedometer, hydro suspension, thicker brake pedal, vinyl covered dash, Cooper s heater, brake booster. Motor rebuilt 3 years ago ,The head has been ported and bigger valves fitted with hardened valve seats which was all done by Graham Russell so it’s nice and quick. It’s pain
22
2003 Holden Monaro CV8 series2 Circuit Racing No expense spared Professionally prepared, turn key & Ready Experience the excitement of the track with this exceptional car and enjoy track life LS 6LTR Engine (25hrs only) Curl Over-race springs, adjustable suspension. Bembro brakes, 6 piston front& 4 piston rear. Motec PDM Motec digital Dash 2 Battery isolation switches Cobra seat RPM Harness Roll Cage Diffs true track 3-5 Ratio Race tyres.
4
Roll CageLog Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
4
Roll CageLog Book
IPRA Holden Monaro Current National #1, Lap record holder SMP, Phillip Island, The Bend. Holinger RD6H Tilton 5.5" 3 plate HRT Mag bell housing - reverse starter Harrop 9" IRS Adjustable Bars F & R Many lightweight parts Full Motec C127, PDM30, M150 ECU, Motorsport Loom ATL Kevlar Bladder Tank / Bosch motorsport pumps Tyre Temp Sensors x 4 MCA Gold Series Suspension Alcon Supercars calipers F & R - AP rotors LS - Darton sleeves, Callies crank, Higgins custom heads, Morrison ITB Built from new
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
1
Roll CageLog Book
For sale Camaro Aussie race car. 1 round old after complete rebuild see below. Engine-gearbox- clutch 1 round old Diff centre half a round old Drive shaft half a round old Shocks 1 round since rebuild Uprights 1 round since full service Front and rear windows 1 round old. New reverse gear 1 round old Reco alternator 1 round old. Comes with spare bonnet with high aero kit Spare set of wheels x2 rounds old. My loss is your gain everything is new and ready to race. We also have a enclose
6
Roll CageLog Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car
10
Roll CageLog Book
Aussie Racing Car with Trailer and spare parts! Selling our Euro GT Mercedes Benz Aussie Race Car and custom trailer. Only done 2 practice days since Bare chassis rebuild, including rose joints, brake lines, powder coat chassis + paint body. John Connan Engine. Comes with spares package (wheels/tyres, complete NEW front bonnet and splitter, oil, brake lines etc). Comes with brand new custom built enclosed trailer (alloy composite panels, Alcoa torsion suspension). Might consider separating car
3
Roll CageLog Book
Excellent car with new wrap. Very well maintained car that has had new discs, pads, crown wheel and pinion, 6 point belt, screen, and various rod ends. Runs a water cooled set up that is fast and reliable. Comes with spare front splitters and Bathurst wing. If you’re a good enough driver the car can run top 10. $26500
15
SLASHED THE PRICE FROM $140.000 TO $100.000 !!! I would like to have more room in the garage for another car. My pain your gain !!! 1969 Corvette Hard Top - Group S log book SBC 350 - RHS heads . Built by Matt Reid of Advanced Motorsport Solutions. Perth M22 by Paul Cangiolosi of Medatronics USA Differential by Tom's and Gary Ramadei So Cal manual car, so no rust in the subframe. Built following Chev power book and recommendations from Guldstrand and Greenwood , and using an
5
Roll Cage
This 72 Camaro is a project I started to build for the Australian Tans Am class. It has been caged and had the floor modified to suit the correct gearbox and where the muffler will sit. It has also had the pedal box master cylinders installed. The only thing missing is the 2 front guards. The car will also come with 2 brand new full quarter panels, a fiberglass bonnet, new race seat, pedal box, race fuel tank and brand new limited slip differential from the US. I have spent $25,000 to date