SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

206 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

10
Roll Cage
Mitsubishi Evolution - EVO V Tarmac Rally / Track Car Roll Cage – Motorsport Australia Approved, fully welded 6 Point, by Fabraications FIA roll cage padding VELO Apex Seats: (1x) XL and (1x) Std fitted on welded rails, alloy side mounts VELO Black 5 Point harnesses Fire extinguishers (x2) Remote electrical cut out switch HC battery mounting case Rear fire wall – carpeted MCA Red Competition Suspension, fully adjustable Front RS strut tower brace Brembo Brake Callipers, ELIG Sports Brake Pads,

Croydon VIC, Australia
Share
Watch
72
$360,000 EGC
Registered
The best sports saloon....ever Commencing production in 2021 and listing a raft of improvements over the already astonishingly capable M5 Competition, the M5 CS fast became THE ultimate M-Car and global production sold out instantly. Every single one of the only 20 allocated to Australia was snapped up as soon as BMW confirmed availability in our market. Fortunately the car lived up to the hype with the CS being even that much better than the Competition on which it was further honed and revise

Mona Vale NSW, Australia
Share
Watch
8
Registered
This was my daughters car which she has owned for 12 years and enjoyed every moment. Car is presently at my place which is about ten minutes past the Newcastle end of the freeway. Car has never been modified in any way and has been well maintained. NSW rego paid until May 2025. 166kw five cylinder low boost turbo engine has 320Nm of torque, 6 speed manual gearbox and Recaro seats. The few times I have driven this car I am amazed at how docile it can be but goes pretty good if you get up it. Al

Ashtonfield NSW, Australia
Share
Watch
10
Registered
FOR SALE 400kw EVO X BATHURST EDITION TMR (ADM) - Comes with spare single Titanium SMB Exhaust Tip - Comes with a recirculating pipe which can be easily clamped on if pinged for Loud Exhaust - Reconditioned Front CV Joints - Serviced every 5,000 kilometers for minor service and every 10,000 kilometers for full service. - Tuned with 2 modes – which both Runs on E85 Only – Last Tuned by Elite Pro Tuning - Low Boost: 28PSI – 380KW - High Boost: 35PSI – 425KW Part List: - Nitto 2.2L Stroked - GS

Rockhampton QLD, Australia
Share
Watch
10
Registered
Log Book
For Sale: One-of-a-Kind BMW E39 540i Experience unparalleled driving with this meticulously upgraded BMW E39 540i. • Manual Transmission: Expertly swapped with genuine BMW parts imported from the USA and UK. • Engine Rebuild: Completely rebuilt from the ground up with cast iron cylinder sleeves, genuine BMW bearings, pistons, rings, and timing chain kit. • Enhanced Performance: Equipped with BC Racing coilovers and a Turner Motorsport sump guard for optimal handling and protection. • Prem

Wangara WA 6065, Australia
Share
Watch
10
Roll Cage
Log Book
BMW 1M 08/12 in white $39500 Australian Dollars 105717 Klm or 65689 miles Full bolt in AGI roll cage fitted 2019 Bilstein coils and shocks fully adjustable, Turner Motorsport Monoball Front Control Arm Bushings Harrop extreme brake kit fitted by Harrop, New Endless front pads just fitted. Oversize intercooler and all charge piping upgraded to alloy with extra tap points with Tial BOV, AEM WMI with controller fitted for safety and inlet track cleaning not performance. MHD tune 339hp at the whe

Sarsfield VIC, Australia
Share
Watch
14
BMW 130i 3e Production Car - For Sale or Hire Here’s your chance to own the 2023 Australian Class C (APC) Championship wining car. Extremely reliable well sorted and put together package that is still capable of podiums at the highest level of production car racing. This little BMW had a full refresh at the start of 2024 for the Bathurst 6hr and is ready to go for the new owner just add fuel and go. New CSF Radiator New clutch New water pump New Alternator / belts New leads and plugs New

Wollstonecraft NSW, Australia
Share
Watch
10
Registered
Very rare 90’s hot hatch for sale Owned this one for about 14 years No expense spared Genuine 1990 ford laser tx3 turbo 4wd Has a fully forged engine that goes like a scalded cat Body in great condition for age has couple stone chips etc Has made 223hp at all 4 wheels on e85 Link g4+ tuned my madoc performance 5 stud gtr hub/brake upgrade all round Bc Coilovers strut brace Mod list in the photos Located in Warwick Currently on club rego $21,990 ono

Warwick QLD, Australia
Share
Watch
10
Roll Cage
Log Book
EA/EB Saloon Car or Improved Production Purchased to race while my other car was rebuilt (now finished) Fresh 3.9 Litre, EMS ECU, new larger injectors and extractors/exhaust Rebuilt gearbox & diff New master cylinder & rebuilt calipers MA logbooked as a Saloon Car. compliant but not currently sealed. Two sets of wheels with one set of useable RE11s Winton 1.42, Sandown 1.32, SMSP GP 1.54 Spare gaurds, bonnet, front bar and doors

Cessnock NSW, Australia
Share
Watch
6
Roll Cage
Ideal sprint/hillclimb car with freshly modified and dry sumped 3.8 litre Magna V6,fresh gearbox and LSD with 4.11 ratio. Electric power steering, BC racing HD struts and springs, 380 brakes & modified suspension. Half cage with intrusion bars, 6 pt harness and 17x9 lightweight wheels. Too many features to mention. Awesome car to drive, 1.17 flat at Mallala ,50.36 Backbone hill climb with 70 y.o driver. Plenty of improvement left......reluctant sale at $22000......cost more than that in parts.

Reynella SA, Australia
Share
Watch
51
$150,000 EGC
Registered
Towards the end of the F80 series M3, BMW had really got the formula right. Over 5 years of continual development and several iterations, each successive addition just tweaked and refined what was already a fine drivers car into something of a fine drivers weapon. The Competition was an immediate success and what most thought would be the pinnacle....and then the CS was announced. Taking everything from the Competition, the car was again refined and turned up and culminated in the car we presen

Mona Vale NSW, Australia
Share
Watch
10
Registered
Roll Cage
Log Book
Only selling as I recently built a G4 car. Originally built for Ross Dunkerton for 2006 Targa West. Also previously driven by Simon Knowles in the Asia Pacific Rally Championship. Very lightweight and well built vehicle from Team Mitsubishi Ralliart. Well sorted and fantastic handling car. Fresh engine built by Techsport and Jeff Beaumont 216kw atw on 98 fuel. Race prepared by Adrian Stratford Motorsport and ready to enter its next rally. New Exedy Clutch Kelford Cams Motec ECU and C125 Dash Mo

Geelong VIC, Australia
Share
Watch
88
Registered
The AC Schnitzer S5 3.0iX is a Schnitzer conversion of a BMW 525 iX This car was built by BMW in RHD (unique for a 525iX) and then underwent the conversion at the UK Schnitzer workshop. The original M50 BMW engine is replaced with a Schnitzer S5 engine which is 3.0 litre and with Schnitzer cams, porting and new manifold and exhaust. The mapping is completely upgraded and BMW M Technique is installed. The suspension is upgraded with Schnitzer coils and new Bilstein shocks which are coupled with s

Atherton QLD, Australia
Share
Watch
16
Roll Cage
Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors, 3 inch brake ai

Mount Waverley VIC, Australia
Share
Watch
4
Roll Cage
One of the original WPS Supercars, Driven by David Bernard. It was originally built by 00 motorsport. Sequential gearbox, Has been stored for a while but is still in excellent condition. Willing to help with shipping arrangements. Logbook can be sourced through Cams Australia.

Taupō, New Zealand
Share
Watch
6
Roll Cage
Log Book
Evo 5 CP9A production touring log booked currently running in Improved production and combined sedans. Brand new Engine built by Dashsport with new Evo 9 turbo and manifold just run in and tuned. State spec welded cage with dual fuel tanks currently running on 98ron but is E85 compatible. Reflashed ecu, RS drivetrain with Ralliart front diff. AP front calipers and Brembo rears. Quick reliable car with top finishes in NSW and QLD Production car championships.Ideal for tarmac rally also. 3 sets of

Arundel QLD, Australia
Share
Watch
14
Roll Cage
Log Book
This is a unique piece of V8 Supercar and Dick Johnson Racing history and has only had two owners after its time at DJR. Originally built as an AU model Ford Falcon V8 Supercar, this car (chassis DJR AU12) was converted to BA bodywork by DJR and became a part of the Bowden Collection of cars before being purchased by its current Queensland-based owner in 2014. Raced by Paul Radisich in Shell Helix colours for DJR as the #18 Falcon during the 2001 (winner of the Perth round of the championship)

Cheltenham VIC, Australia
Share
Watch
6
Ideal start for your track project. The BMW is in very good condition rust and damage free. It needs an engine rebuild with suspected rod bearing damage. Rebuild it or engine swap. Car is in Newcastle and whilst it runs it will need to be towed.

Newcastle NSW, Australia
Share
Watch
8
Roll Cage
Ford BA race ute (used in the Queensland production Ute series) Has come either 2nd or 3rd in championship in each year it’s competed - [ ] BF 6 cylinder gas motor , billet oil gears and tune (1-2 seasons old) - [ ] 6 speed gear box with rip shifter (4 races old) - [ ] Custom single piece tail shaft (4 races old) - [ ] Locked diff - [ ] Qld production ute series brake package - [ ] Quick release steering wheel - [ ] Scott’s rods cage (national spec not just local requirements) - [ ] Push butt

Mudgeeraba QLD, Australia
Share
Watch
6
Roll Cage
Log Book
Reluctant sale but it’s time to move on. Finally concluded I just don’t have the time or energy anymore to go racing. Grandkids have taken over. Built in 98. First raced in 99. Have been upgrading since. Lots of fun in a fast, consistent car. CAMS Log book 3J for Improved Production issued 1998 Mitsubishi 4G54 Engine (bored to 2.8) Dyno’d to 182 RWHP Lightened pistons M6 Head (Ported, Polished and Flow Tested) Twin Weber 45 DCOE Carburettor’s Custom camshaft Custom Intake manifold Custom

Flagstone QLD, Australia
Share
Watch