97 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
Ideal start for your track project. The BMW is in very good condition rust and damage free. It needs an engine rebuild with suspected rod bearing damage. Rebuild it or engine swap. Car is in Newcastle and whilst it runs it will need to be towed.
8
Roll CageLog Book
2009 BMW 125i Coupe built by David Levy Motorsports in Melbourne . Build year 2022 . Built to race production touring or improved production . Currently running improved production . MCA red shocks KOYA SF 13 rims F20 M135 brake upgrade Padget RS 29 brake pads with braided lines E90 M3 front lower control arms LSD 1.5 way OS Giken from Diff Lab Sabbadin full stainless exhaust CAE short shift gear lever Works Bell quick release steering wheel H&R sway bars Custom rear spoiler BDS cust
10
I am selling my beautiful Van Diemen RF 87 Formula Ford. Car is in Beautiful condition. Has C of D and has a good John Dean engine. Competed at Winton Festival of Speed 2023 where we finished 4th or thereabouts for the weekend. Car comes with some spares, pushrods, control arms and spare nose cone and nose box. Was recently restored and has all new brake lines and fittings. Motor has done 2 meetings. new rotors on the front. Gear ratios to suit all the tracks we run on. 2 set of wheels and tyr
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
5
Roll CageLog Book
Selling my collectable 1975 Toyota Corolla log booked for Improved Production since 1993. Running a 4 A-GE 1600 small port with forged medium weight rods, hi comp with Mahle pistons and forged rods Arp holding it together. The head cams are TRD formula Atlantic. 320 degrees adjustable gears with shim under bucket valve actuation. Custom quad throttle bodies. Radiator is new. All suspension bushing is new, Oil cooler is new, the sump is winged and gated, Haltech 2500 with pro logic dash. The gear
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65
4
Roll CageLog Book
I am selling my collector’s item 1975 Toyota Corolla log booked for Improved Production since 1993. Running a 4 A-GE 1600 small port with forged medium weight rods, hi comp with MAHLE pistons and forged rods, Arp holding it together. The head- cams are TRD formula Atlantic .320 degrees Adjustable gears with shim under bucket valve actuation. Custom quad throttle bodies. Radiator is new. All suspension bushing is new, Oil cooler is new, the sump is winged and gated, Haltech 2500 with pro logic
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
15
Roll Cage
ST185 GT-4 Wide Body 4wd 3SGTE. Built for Track/Hillclimb/Tarmac. Full cage, Harness and Velo race seat. Forged internals, CP pisons, eagle rods, all balanced, BC 264 cams, BC Titanium retainers and heavy duty valve springs, Turbosmart WG40, Link G4+ ECU, Garrett Turbo, Boost 6 Manifold External Waste Gate, XTG clutchFront Mount Intercooler, Walbro pump etc. External engine oil coolers, remote oil filter......... Conservatively tuned to 275Kw and 678Nm at 17 psi on E85 when it ran out of inje
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
14
I'm selling my RF89 Van Diemen, Chassis number 1415, logbook number H3442 Historic car # FC155.15.18 I imported this car from France in 2020 from the historic race car company Espirit Competition (Laurent Forte). It was a project car for the owner and his son to rebuild. For most of it's later life (2002-2016) it was a driver training car for Manadien Racing in France, who was the original buyer of the car in 1989. I have raced it in 11 races along the Eastern Coast with a race win at Morgan Pa
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
14
Roll CageLog Book
BMW 135I built for Bathurst 6hr, only 2 meeting old , finished 12th out right in 2022 . Car was built by David leny motor spot & helped by Barry graham. Car comes with spares we take to Bathurst, no money to spend and is ready for Bathurst 2025 . Car has Supashocks all round , new seat and belts Call chris for more info and photos.
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
20
Roll CageLog Book
Own a piece of history. 2017 BMW M4 GT4 Accepting Offers, enquire now. Don't miss the chance to jump into the rapidly expanding GT4 Australia category, with this race ready and proven BMW M4 GT4. 2018 Bathurst 12 hour winner, at the hand of Tony Longhurst, this car has been parked up as a collection piece for much of its life since. Brought out of retirement for the 2023 Monochrome GT4 Australia competition by its new owner, it competed competitively, taking multiple podiums, while being
10
Roll CageLog Book
A podium winning car in the 2023 TGRA 86 national series, this Toyota 86 is precision-engineered by Neal Bates Motorsport and fully compliant with the 2024 Toyota 86 scholarship series. It showcases a commitment to thorough preparation, from a complete overhaul of control arms, rear subframe, and bushings to an exhaustive refinement of its electrical systems. Prepared meticulously for the ’23 season, this vehicle promises performance and reliability. Inclusions: 2015 Toyota 86 TGRA Race Car in
15
Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),
10
New Stock Alert - SOLD AS A TRACK CAR ONLY!! $29,990 for the complete minus the front seats! PLEASE NOTE, THIS VEHICLE CANNOT BE ROAD REGISTERED!!!! All Parts Tested come with Full Guarantee & Warranty 2020 Toyota Yaris GR 41,XXXKMS 6SP Transmission AWD (Driveline components inspected ) GR Yaris OEM Wheels 3cyl Turbo Car starts, runs and drives! This GR Yaris previously had some damage, which has since been professionally repaired at our expense! So all you need to do is jump
9
Roll Cage
For Sale | Toyota AE86 -Ready for time attack but can be used for drift or circuit racing -Immaculate build and maintained to the highest standard Please contact me for more information https://www.speedhunters.com/2018/11/the-ultimate-drift-transition-in-an-ae86/toyota-ae86-beau-yates-blakejones-speedhunters/