26 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
12
Roll CageLog Book
IPRA 3J VS Holden Commodore. Ex Dan Russo Commodore Cup car with chrome moly roll cage, Comes with Fresh ex Gene Cook 253 engine with com cup sump, super T10 Dog box 4 speed,Romac full floater rear end, Big bearing front hubs, Bilsteins suspension with brand new Rota 18" x 9"rims and com cup brake package along with aims dash & coms radio wiring. New air Jack system fitted to car. WP: 1:06 SMSP 1:44 Car comes with extensive spares package which includes most parts to install a LS into the car.
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
15
Roll CageLog Book
CSV Volanti Production Touring Car. Car under went full restoration 3 years ago. Engine and transmission rebuilt 2 meetings ago. LS1 engine comes with cnc ported CSV spec cylinder heads which made 415hp at the wheels.CSV Volanti comes with homologation paperwork, Difilipo ceramic coated headers & XForce exhaust, 6 piston HSV front & Harrop rear brake calipers with circo endurance pads along with Nitron Shocks, Motec dash, New Racetech seat with RPM endurance harness, Full spool diff with 3:9 gea
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
10
Roll CageLog Book
Hoppy built ex NZV8. Holden 355 Stroker producing just over 500 hp at the fly wheel. TTi 5 speed sequential gear box. Upgraded front brakes and bigger rotors. Running 18x9.5 rims so tyres easy to get. Motec dash that works with beacon. Brand new truetrac diff. No expense has been spared on the upgrades to this car and it is now a front running GTRNZ GT3 car and last time out at manfield did a 114.3 on old tyres. It’s time to move up to GT2.
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
10
## Deposit taken## VL Commodore in SV Walkinshaw Body Kit - HRT livery Log Booked Sport Sedan and IPRA Fully complied CAMS roll cage LS2 Engine Magnum 6060 6 Speed Gearbox 9" Ford Diff Brembo Brakes all round 18" wheels Suspension upgrades Professionally wired to include Motec instrument panel and Haltech IQ Dash. Excellent condition and now being offered for sale due to lack of use. This car deserves to be used and would make a great car for the blossoming replica / tribute category. The car
4
Roll CageLog Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin
14
Roll CageLog Book
This very special original Chassis no GSM 009 Kmart VT Commodore car built by Gibson Motorsport. This was the last built Gibson commodore v8 supercar formerly raced by four time Bathurst 1000 winner Greg Murphy. Debuted by the Kmart branded Gibson Motor sport team at Calder in 2000 shell championship, This car was initially driven by Greg Murphy. It became the Murphy / Steven Richards car for the Queensland and Bathurst endurance races. Scoring podium finishes on both occasions finishing 3rd. Th
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
7
WAU WR024 Unique opportunity to own a piece of Supercar History. Scott Pye’s race winning ZB Commodore Supercar is now on the market and ready for its next chapter. Raced by Scott Pye, Warren Luff and Bryce Fullwood. Restored by WAU to 2018 Albert Park race winning livery this car is eligible for super 2 or alternatively would look right at home in any car collection.
8
Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.
10
Saloon Car Fresh nut and bolt ground up build, with everything new, rebuilt or serviced. Too much to list, never crashed. Rowse motor, Top HP on E85, MSA log booked and SCRA sealed. Built by very experienced and competitive Saloon Car team. Unfortunately has to sell to make space for another project so my loss is your gain. Turn key start in what many regard as Australia’s best bang for buck racing category, can come with track support for new drivers.
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
1
PMM chassis Hercules. You will not find a genuine Supercar of this standard anywhere at this price. This car has been with its current owner for the last 10 years. Extremely well maintained and presented. Huge spares inventory which will all go with the car. Nothing to spend
6
Roll CageLog Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car
15
SLASHED THE PRICE FROM $140.000 TO $100.000 !!! I would like to have more room in the garage for another car. My pain your gain !!! 1969 Corvette Hard Top - Group S log book SBC 350 - RHS heads . Built by Matt Reid of Advanced Motorsport Solutions. Perth M22 by Paul Cangiolosi of Medatronics USA Differential by Tom's and Gary Ramadei So Cal manual car, so no rust in the subframe. Built following Chev power book and recommendations from Guldstrand and Greenwood , and using an
5
Roll Cage
This 72 Camaro is a project I started to build for the Australian Tans Am class. It has been caged and had the floor modified to suit the correct gearbox and where the muffler will sit. It has also had the pedal box master cylinders installed. The only thing missing is the 2 front guards. The car will also come with 2 brand new full quarter panels, a fiberglass bonnet, new race seat, pedal box, race fuel tank and brand new limited slip differential from the US. I have spent $25,000 to date