176 items for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
Featured ads
All Results
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65
72
Registered
The best sports saloon....ever Commencing production in 2021 and listing a raft of improvements over the already astonishingly capable M5 Competition, the M5 CS fast became THE ultimate M-Car and global production sold out instantly. Every single one of the only 20 allocated to Australia was snapped up as soon as BMW confirmed availability in our market. Fortunately the car lived up to the hype with the CS being even that much better than the Competition on which it was further honed and revise
3
Roll CageLog Book
I am selling my collector’s item 1975 Toyota Corolla log booked for Improved Production since 1993. Running a 4 A-GE 1600 small port with forged medium weight rods, hi comp with MAHLE pistons and forged rods, Arp holding it together. The head- cams are TRD formula Atlantic .320 degrees Adjustable gears with shim under bucket valve actuation. Custom quad throttle bodies. Radiator is new. All suspension bushing is new, Oil cooler is new, the sump is winged and gated, Haltech 2500 with pro logic
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
15
Roll Cage
ST185 GT-4 Wide Body 4wd 3SGTE. Built for Track/Hillclimb/Tarmac. Full cage, Harness and Velo race seat. Forged internals, CP pisons, eagle rods, all balanced, BC 264 cams, BC Titanium retainers and heavy duty valve springs, Turbosmart WG40, Link G4+ ECU, Garrett Turbo, Boost 6 Manifold External Waste Gate, XTG clutchFront Mount Intercooler, Walbro pump etc. External engine oil coolers, remote oil filter......... Conservatively tuned to 275Kw and 678Nm at 17 psi on E85 when it ran out of inje
10
Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
51
Registered
Towards the end of the F80 series M3, BMW had really got the formula right. Over 5 years of continual development and several iterations, each successive addition just tweaked and refined what was already a fine drivers car into something of a fine drivers weapon. The Competition was an immediate success and what most thought would be the pinnacle....and then the CS was announced. Taking everything from the Competition, the car was again refined and turned up and culminated in the car we presen
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
9
Registered
3L Convertable. Shadow black accents, GT2 Napa leather Seats, Ceramic paint protection, 1000 km.
5
Roll CageLog Book
1984 Toyota AE86 Sprinter, Motorsport Australia Logbook. 4AG 1600 twin cam with 4-2-1 extractors. T50 5 spd manual transmission. New Exedy OEM clutch. Timing belt, tensioner, water pump, crank and cam seals replaced June 2019. Cusco strut brace. Aero bonnet latches, Front Tow hook, Rhino Alarm & Immobilser 6 point Motorsport Austrlia approved roll cage. Cobra Monaco Pro driving seat on RPM seat side mounts. Ecliptech SHIFT-i shift lights. Mains battery power shutoff switch. 4.3 LSD.
9
RegisteredRoll Cage
Toyota MR2 SW20 built for track days and road use. Car is in great condition. Engine 5SGTE 2.2l stroker crank Aeroflow turbo Custom exhaust Custom air cleaner and intercooler Haltech engine management Runs E85 and flex tuned 380Hp at wheels( its fast...) Gearbox, 5 speed with locked diff. Custom alloy radiator/thermos fans Custom engine compartment extractor fans Power steering, power windows no aircon. Race seats and harness plus standard seat belts fitted. Roll cage Mod plated for qld. Afte
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
14
Roll CageLog Book
BMW 135I built for Bathurst 6hr, only 2 meeting old , finished 12th out right in 2022 . Car was built by David leny motor spot & helped by Barry graham. Car comes with spares we take to Bathurst, no money to spend and is ready for Bathurst 2025 . Car has Supashocks all round , new seat and belts Call chris for more info and photos.
10
Roll CageLog Book
MAZDA RX7 - BUILT IN 2016 - CAMS LOG BOOKED ROLL CAGE BUILT FOR RELIABLITY -13B BRIDGEPORT 2ND PLACE BATHURST CHALLENGE 2019 1ST PLACE OVERALL REPLICA TOURERS 2021 NEW ENGINE BUILT BY SIMON @ MACGREGOR MECHANICAL NISSAN SKYLINE FRONT BRAKES INJECTION PERFECTION MICRO TECH DASH SERIES 3 LIMITED SLIP DIFF - STRONG RELIABLE CAR VN COMMODORE RADIATOR KEEPS THE CAR COOL - PLUS EASY TO GET. NEW FUEL PUMP UPGRAGED SET UP. LIGHT WEIGHT COULD EASILY ADD GROUP C FLARES & WHEELS FOR A MOCK UP. PLENTY OF
36
Registered
2020 Chevrolet Camaro ZL1 Coupe 10Spd Auto 6.2SC LT4 - 1 Owner - Build #0038 - ONLY 830klms from new - Highly Collectable HSV - Totally Original We are proud to offer to you this great opportunity in securing this highly collectable never to be repeated ''build'' #0038 Camaro ZL1, one of the first delivery Camaro ZL1's for the public allocation of 375 Camaros made for the Australian market through Walkinshaw Performance who made the ADR/conversions for the local market. This stunning and truly
40
Roll Cage
2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
20
Roll CageLog Book
Own a piece of history. 2017 BMW M4 GT4 Accepting Offers, enquire now. Don't miss the chance to jump into the rapidly expanding GT4 Australia category, with this race ready and proven BMW M4 GT4. 2018 Bathurst 12 hour winner, at the hand of Tony Longhurst, this car has been parked up as a collection piece for much of its life since. Brought out of retirement for the 2023 Monochrome GT4 Australia competition by its new owner, it competed competitively, taking multiple podiums, while being
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $9900