41 items for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
56
Roll CageLog Book
2014 Nissan Nismo GTR GT3 Race Car - Fanatec GT World Challenge Australia Trophy Class Eligible - Fresh rebuild - Brand New Engine - Current Cams Log Books - Ready to Compete We are very excited to offer you the great opportunity in securing this GTR collector's dream, the sought after and extremely competitive 2014 Nismo GTR GT3 Racing Car which achieved Nissan’s first overall victory in Pirelli World Challenge, U.S.A. This extremely rare example is 1 of just 4 in Australia and 1 of just 27
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear with surge tank runn
15
New Coyote 5.0L engine - 2 race meetings old Gearbox Reconditioned Light-weight / quick release boot lid Carbon roof turret Full function display Spark steering wheel Solid prop Shaft w/sleeved journals FIA onboard efficiency Cooling System PWR Hi Efficiency Cooling System Motec M150 ECU with 250 mb logging Ramp and Clutch type Limited Slip Differential (LSD) TIlton 3-Plate Sintered Clutch, Master Cylinder's and Pedal Box GPS vehicle speed system 9 Position Throttle mapping Pit Lane Speed Limi
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
20 1
Roll CageLog Book
This RS is a CAMS log booked ex-Targa Rally car and mod plated for all modifications in the car shoudl you want to register it for the road (half cage mod plate, front legs need to come out for roadworthy to re-register, easy bolt in job). Details: - 22,000 kms - Head Gasket recall done at Ford - Velo driver and passenger seat with Velo 6 point harnesses all in date - AGI National Rally Spec Roll Cage (CAMS certified) - MCA Custom Red Series Coilovers with multiple spring rates supplied with th
5
Roll CageLog Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
15
Roll Cage
No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.
11
RegisteredRoll Cage
FORD FOCUS RS AWD LE Purchased new 2018 - 1 owner. 2018 FORD FOCUS RS LE 2.3 TURBO AWD. MODDED FOR HILL CLIMB COMPETITION. ORIGINAL 3,000 KM'S ONLY (3,000 - NOT 30,000) MISHIMOTO INTAKE & INTERCOOLER PIPES K & N AIR FILTER IN MISHIMOTO AIR BOX. (COMES WITH MISHIMOTO INTERCOOLER - NOT FITTED) COBB CUSTOM TUNE & HAND HELD CONTROLLER. LED SHIFT LIGHT. "AUTO THROTTLE BLIP" FITTED FOR DOWN SHIFTS. X-FORCE TURBO BACK EXHAUST WITH REMOTE CONTROL REAR MUFFLER FLAP. 257 WHEEL KW'S. QUAIFE FRONT LSD (F
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
10
Roll Cage
2004 ST170 Ford Focus 6sp Manual Duratec ST 2.0ltr 170bhp stock engine Brad Stacey WA CAMS Registered 4pt Weld in cage. Vibratechnics Race Engine/Box Mounts Battery Relocate tray in cab fitted, Battery still under bonnet. Custom air intake. Timing Belt replaced Water Pump replaced Bespoked Engineering Billet Thermostat kit (not fitted) Raceworks 2ltr Catchcan with fittings (not fitted) + PCV Adaptor to suit engine. Cosworth Tuned Headers in heat wrap. MSD Coil & 8mm Leads Iridium Plugs Bonnet &
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
19
RegisteredRoll CageLog Book
NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
15 1
Roll CageLog Book
I have for sale my BMW M4 3E Production Race Car (No longer includes Bathurst Entry) Many wins and 3rd in 2023 Bathurst 6HR, only 4 seconds off the winner after 6 hrs of racing. This car is very competitive and a must-have if you want a chance to win the Bathurst 6HR or want to run NSW/QLD State Series or APC. Years of development work and more money than I can remember creating a very reliable race car. Strict maintenance records and race data can be provided. The car can be sold as is or as a
10 1
RegisteredLog Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1
5
Roll CageLog Book
WA Production Car Championship Winner 2022 Season Motorsport Australia Log Booked Whiteline coilovers AGI Rol Cage Turbo Back Exhaust Winmax Pads Velo race seat (3 meets old) with OMP Harness Radum dual catch cans Braided brake lines Oil cooler kit Mountune baffled sump 2x sets of 18" wheels with A050 Tyres More pics will be uploaded soon