36 items between $30,000 & $50,000 for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
All Results
14
Registered
1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit
10
Registered
FOR SALE 400kw EVO X BATHURST EDITION TMR (ADM) - Comes with spare single Titanium SMB Exhaust Tip - Comes with a recirculating pipe which can be easily clamped on if pinged for Loud Exhaust - Reconditioned Front CV Joints - Serviced every 5,000 kilometers for minor service and every 10,000 kilometers for full service. - Tuned with 2 modes – which both Runs on E85 Only – Last Tuned by Elite Pro Tuning - Low Boost: 28PSI – 380KW - High Boost: 35PSI – 425KW Part List: - Nitto 2.2L Stroked - GS
17
Roll Cage
Vl Sports Sedan. Recently professionally built space frame with front and rear ride height adjustability and driver ergonomics factored into the chassis. MSF Racing Big bearing front hubs & calipers, David Bos built 9inch floating cambered 3 link rear end with watts linkage and adjustable (Derek Van Zelm) rear blade sway bar. Set up for destroked Ls3 or run a turbo SOHC billet RB30. Comes with moulds.
6
Roll CageLog Book
Evo 5 CP9A production touring log booked currently running in Improved production and combined sedans. Brand new Engine built by Dashsport with new Evo 9 turbo and manifold just run in and tuned. State spec welded cage with dual fuel tanks currently running on 98ron but is E85 compatible. Reflashed ecu, RS drivetrain with Ralliart front diff. AP front calipers and Brembo rears. Quick reliable car with top finishes in NSW and QLD Production car championships.Ideal for tarmac rally also. 3 sets of
16
Roll CageLog Book
New Build. Tested and set up over the last year at open practice. The car was entered into the Sydney 300 for its 1st Race, Achieving pole position and the race win in division E. -National / Rally FIA role cage -PB 4 piston aluminum calipers -DBA 5000 two-piece rotors 320x28 -AP Racing CP3215D50 pads 90% left -Custom cacuum chamber, can adjust pedal feel - Wilwood rear brake Bias -PB damper adjustable coilovers -Quaife ATB helical LSD -Custom exedy button clutch -Enduro developed engine. -Fo
15
RegisteredLog Book
Features Harrop true track diff. New Koni shocks new Ford leaf springs King springs front. New tyres New brakes pads and rotors 12months registration Number 16 built of 57 This 2009 Ford Performance Vehicles Pursuit has a 5.4 litre engine and 315kW of power!. EXTRA FEATURES: - 19" alloy wheels - Data dots - Front & rear power windows - Power door mirrors - Full body kit - Starter button - Climate control air conditioning - Bluetooth - Limited slip diff (LSD) - Sports pedals - Ventilated d
9
Roll Cage
Brand New Build: Never raced Roll cage & all fabrication by motorsport specialists, Garage1, in Melbourne. All listed parts are new. wheels, tyres, Supashock kit, seat & harness, engine blueprint, custom exhaust, gear shift mod, carbon intake, brake bias adjuster, multi spray firebomb system, window net, paint & much more. Everything has been built to the highest standard. Selling due to a change of racing plans. Selling on behalf of owner Viewing available most days during business hours.
10
Roll CageLog Book
VS commodore cup car. Built new by Dean ORR of Perkins Engineering, and never raced as class was cancelled prior to completion. The shell was a NOS lightweight shell with no Holden VIN or chassis number. Running 253 Gene Cook race engine. Aluminium Commodore Cup car heads. Super T10 PPG dog box full floater differential Alcon 6 spot brakes. AIM dash. Race Tech seat PWR radiator. Currently Logged as improved production but most suited as entry level sport sedan. Car has only completed in a hand
59
Registered
The Holden Special Vehicles SV5000 was a proper V8 bruiser and was built in very limited numbers (359 in total) between 1989 and 1991. Based on the VN Commodore, the SV5000 started life in Holden’s Elizabeth plant in South Australia before being transferred to the boffins over at HSV, who were located in Notting Hill in Victoria at the time. This particular SV5000 is finished in SV Racing Green, one of only a handful of colours available on the SV5000 model. Both inside and out this SV5000 prese
15
Roll Cage
No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.
10
Registered
Registered on road, genuine sleeper Runs on E85 only, 402 iron block with Borg Warner turbo. Turbo 400 gearbox, transbrake with two step. This car is a sleeper, good condition. Comes with tyres and rims for drag racing. 14 psi 868hp at the hubs, 10.8 Single owner
4
Roll CageLog Book
2001 Mitsubishi Lancer Evolution 7 RS (Evo VII) Log booked as production touring car 3E, fun and low maintenance competitive car Fresh motor that has only done 3 race meetings with a larger baffled sump, tuned, MCA red suspension, Haltech dash, ducted brake cooling, Cams approved Bonds roll cage, additional fuel tank in the boot with a swirl pot and bosh fuel pump and much more.. Will include a 2 sets of spare wheels (evo 7 and evo 8) and some race-day spares
15
RegisteredRoll Cage
Amazing 1.9ltr DC2 - Motec M1, Dart block, Golden Eagle crank and Rods, Wiseco pistons. Built for boost... and to be a reliable track engine.. currently turned NA.. Toda headers.. Built by JHH - see image of JHH stamped engine. All Ferrea heads components , over sized valves, 1000cc Injection Dynamic injectors ATS Carbon clutch ATS LSD Skunk cams Spoon brakes Tein Super racing coil overs, with external reservoirs Cusco sway bars All bushes changed with Hard Race bushes. Unfortunately only s
4
Selling my 2.4l stroked evo 6, engine has just been fully rebuilt by Craig at Aurora Speed not a cent spared in the build. Car is currently not running as it needs engine wired up and a tune I’ve just lost interest in the car and need a car more suitable to get around on the daily my loss your gain, the engine build its self was over 20k+ Has brand new Excedy heavy duty clutch (put in with motor) Aftermarket lower rear control arms And plenty of other little added extras I’ve done to
8
Roll CageLog Book
2005 ba falcon xr8 Car has following: Motorsport Australia logbook 3j improved production -fresh 5.4ltr engine with only dyno time -T56 6 speed gearbox with new ceramic clutch and lighten flywheel -4 into 1 pacemaker headers with 4 inch side exit exhaust -brembo 4 pot front brakes with pbr rear -HSD coilovers allround -Adjustable sway bars front and rear New Nolathane bushes in rear cradle with adjustable control arms -Front camber kit -2 sets of Koya SF05 wheels 18X9 front 18X10 rear with slic
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to
10
Roll CageLog Book
VL Calais - Drag Car Roller Set up for SBC and glide Comes with, engine plates, pipes & tail shaft to suit. Full Chassis 4 Link Drag Car. Setup by John Willard @ Flatout Services. Funny Car Roll Cage. ANDRA & IHRA Tech Front Race Struts. Mark Williams Diff Center with new 4.56 gears 35 Spline MW Axels. Koni Drag Race Double Adjustable Rear Shocks. Adj Wheelie Bars Custom Alloy Fuel Cell Wiring, Shifter with Dedenbear shift solenoid, Gauges, MSD 6AL, Chute, Harness, Window Net etc. Wil
17
Roll Cage
Caged to CAMS rally spec 2ltr Zetec 200hp piper cams Jenvey fuel injection Emerald ECU PWR radiator 2x gearboxes. 1 x T9 5 speed( new ) and T3 4 speed Wilwood front brakes Compression struts Atlas diff 2 link plus panhard rod GAZ shocks Capri front struts AVO steering wheel All instrument fiber glass dash 4 Rebel wheel and 4 Hustler wheels RS200 decal kit and badges Just about everything needed
9
Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.
7
Roll CageLog Book
Freshly built rally car from a straight EG Civic shell with extensive tower to tower roll cage by Walker Chassis in Adelaide and CAMS approved for National level rally. Car is also CAMS logbooked 3C PRC. Car only done 5 rallies Very strong and reliable B16A Engine that has very low kilometres since full rebuild with Type R Hi Comp pistons, steel rings, new bearing shells, Type R Cams, Valves and Springs, Crank balanced, Rods and flywheel lightened. Head Ported and Polished. Safely tuned with Ho