221 items for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
10
Registered
FOR SALE 400kw EVO X BATHURST EDITION TMR (ADM) - Comes with spare single Titanium SMB Exhaust Tip - Comes with a recirculating pipe which can be easily clamped on if pinged for Loud Exhaust - Reconditioned Front CV Joints - Serviced every 5,000 kilometers for minor service and every 10,000 kilometers for full service. - Tuned with 2 modes – which both Runs on E85 Only – Last Tuned by Elite Pro Tuning - Low Boost: 28PSI – 380KW - High Boost: 35PSI – 425KW Part List: - Nitto 2.2L Stroked - GS
17
Roll Cage
Vl Sports Sedan. Recently professionally built space frame with front and rear ride height adjustability and driver ergonomics factored into the chassis. MSF Racing Big bearing front hubs & calipers, David Bos built 9inch floating cambered 3 link rear end with watts linkage and adjustable (Derek Van Zelm) rear blade sway bar. Set up for destroked Ls3 or run a turbo SOHC billet RB30. Comes with moulds.
10
RegisteredLog Book
For Sale: One-of-a-Kind BMW E39 540i Experience unparalleled driving with this meticulously upgraded BMW E39 540i. • Manual Transmission: Expertly swapped with genuine BMW parts imported from the USA and UK. • Engine Rebuild: Completely rebuilt from the ground up with cast iron cylinder sleeves, genuine BMW bearings, pistons, rings, and timing chain kit. • Enhanced Performance: Equipped with BC Racing coilovers and a Turner Motorsport sump guard for optimal handling and protection. • Prem
10
Roll CageLog Book
BMW 1M 08/12 in white $39500 Australian Dollars 105717 Klm or 65689 miles Full bolt in AGI roll cage fitted 2019 Bilstein coils and shocks fully adjustable, Turner Motorsport Monoball Front Control Arm Bushings Harrop extreme brake kit fitted by Harrop, New Endless front pads just fitted. Oversize intercooler and all charge piping upgraded to alloy with extra tap points with Tial BOV, AEM WMI with controller fitted for safety and inlet track cleaning not performance. MHD tune 339hp at the whe
14
BMW 130i 3e Production Car - For Sale or Hire Here’s your chance to own the 2023 Australian Class C (APC) Championship wining car. Extremely reliable well sorted and put together package that is still capable of podiums at the highest level of production car racing. This little BMW had a full refresh at the start of 2024 for the Bathurst 6hr and is ready to go for the new owner just add fuel and go. New CSF Radiator New clutch New water pump New Alternator / belts New leads and plugs New
27
Roll CageLog Book
Perkins Engineering VT036 silver bullet 2000 Russell Ingall car Refurbished in 2016 Run at festival of Motorsports Adelaide 2017, log books x3 from 2000 up to date has not been used since 2017
3
Roll Cage
VE Targa Car Supercharged LS3 Jerico 5 speed Gear Box Ford Floater 9” Diff AP Brakes Motec Dash. Intercom.
6
Roll Cage
Ideal sprint/hillclimb car with freshly modified and dry sumped 3.8 litre Magna V6,fresh gearbox and LSD with 4.11 ratio. Electric power steering, BC racing HD struts and springs, 380 brakes & modified suspension. Half cage with intrusion bars, 6 pt harness and 17x9 lightweight wheels. Too many features to mention. Awesome car to drive, 1.17 flat at Mallala ,50.36 Backbone hill climb with 70 y.o driver. Plenty of improvement left......reluctant sale at $22000......cost more than that in parts.
51
Registered
Towards the end of the F80 series M3, BMW had really got the formula right. Over 5 years of continual development and several iterations, each successive addition just tweaked and refined what was already a fine drivers car into something of a fine drivers weapon. The Competition was an immediate success and what most thought would be the pinnacle....and then the CS was announced. Taking everything from the Competition, the car was again refined and turned up and culminated in the car we presen
10
RegisteredRoll CageLog Book
Only selling as I recently built a G4 car. Originally built for Ross Dunkerton for 2006 Targa West. Also previously driven by Simon Knowles in the Asia Pacific Rally Championship. Very lightweight and well built vehicle from Team Mitsubishi Ralliart. Well sorted and fantastic handling car. Fresh engine built by Techsport and Jeff Beaumont 216kw atw on 98 fuel. Race prepared by Adrian Stratford Motorsport and ready to enter its next rally. New Exedy Clutch Kelford Cams Motec ECU and C125 Dash Mo
10
Genuine original VF Craig Lowndes Commodore, No.69 of 233. Built to National 3E Production Touring Car spec by Racebred Engineering using the best components including Murray Coote suspension, Motec, Bond enduro fuel tank, diff cooler, firebomb, cool suit equipped and much more. This is an immaculate, well sorted, competitive car that is eligible for a variety of state and national race categories. Call Scott 0413 254 962.
88
Registered
The AC Schnitzer S5 3.0iX is a Schnitzer conversion of a BMW 525 iX This car was built by BMW in RHD (unique for a 525iX) and then underwent the conversion at the UK Schnitzer workshop. The original M50 BMW engine is replaced with a Schnitzer S5 engine which is 3.0 litre and with Schnitzer cams, porting and new manifold and exhaust. The mapping is completely upgraded and BMW M Technique is installed. The suspension is upgraded with Schnitzer coils and new Bilstein shocks which are coupled with s
97 1
Roll Cage
This left-hand-drive, GM Australia-built Holden Monaro is a real head-turner and the perfect car for the collector, professional racer or track day enthusiast – or the same person all wrapped up into one! The Monaro was assembled by GM Holden at Elizabeth in South Australia and is believed to be one of only a handful of left-hand-drive examples in the country. The odometer reads 31,739kms of which the vast majority (~31,000kms) were driven by Holden engineers at the Lang Lang proving ground in
16
Roll Cage
Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors, 3 inch brake ai
10
Commodore Race Car 308 Worked Blue Motor Log Booked! Supra 5 Speed 10 Bolt Locked Disc Brake Diff. VT Brake Upgrade Full Roll Cage Pedders Springs Koni Adjustable Shocks. Owned for Over 20 Years Very Reliable Cheap To Run Car.
6
Roll CageLog Book
Evo 5 CP9A production touring log booked currently running in Improved production and combined sedans. Brand new Engine built by Dashsport with new Evo 9 turbo and manifold just run in and tuned. State spec welded cage with dual fuel tanks currently running on 98ron but is E85 compatible. Reflashed ecu, RS drivetrain with Ralliart front diff. AP front calipers and Brembo rears. Quick reliable car with top finishes in NSW and QLD Production car championships.Ideal for tarmac rally also. 3 sets of
7
Registered
2001 VU Holden Commodore Ute 250kw LS1 VCM OTR Pacemaker 4 into 1 headers 3inch xforce exhaust (cats deleted) T56 Manuel 365mm two piece forza front rotors 6 piston Alcon callipers Forza FR6 front pads Bendix race pads in rear Braided brake likes all round Aeroflow power steering cooler MCA coilovers front and rear Whiteline strut brace All bushes have been replaced with nolathane Super pro camber kit in rear Brand new true trac diff fully rebuilt 3.73 gears Velo gp 90 fixed seat (ADR compl
6
Ideal start for your track project. The BMW is in very good condition rust and damage free. It needs an engine rebuild with suspected rod bearing damage. Rebuild it or engine swap. Car is in Newcastle and whilst it runs it will need to be towed.
6
Roll CageLog Book
Reluctant sale but it’s time to move on. Finally concluded I just don’t have the time or energy anymore to go racing. Grandkids have taken over. Built in 98. First raced in 99. Have been upgrading since. Lots of fun in a fast, consistent car. CAMS Log book 3J for Improved Production issued 1998 Mitsubishi 4G54 Engine (bored to 2.8) Dyno’d to 182 RWHP Lightened pistons M6 Head (Ported, Polished and Flow Tested) Twin Weber 45 DCOE Carburettor’s Custom camshaft Custom Intake manifold Custom
8
Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.