88 items for sale

Aussie Race Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purposes built tilt trailer with winch. Sydney NSW Log book $18K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185

Race Car Transporter - 45 foot - Fully fitted out - Fits 2 cars. Electric Hydraulic Tailgate (refurbished) - lift up to 2 ton. Honda Generator, Air Compressor, 240 volt lighting and power plugs. Large Fridge Freezer. Stainless Benches and 6 Large Lockable Tool boxes. 20 ton Press. Cabinets and Wheel storage. Battery Charger and internal lighting. LED Lights, new tyres and service. Just had roadworthy and Registration. Australia wide delivery available. Located in Melbourne, heading to Perth next

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams

Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy

1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das

FORD FOCUS RS AWD LE Purchased new 2018 - 1 owner. 2018 FORD FOCUS RS LE 2.3 TURBO AWD. MODDED FOR HILL CLIMB COMPETITION. ORIGINAL 3,000 KM'S ONLY (3,000 - NOT 30,000) MISHIMOTO INTAKE & INTERCOOLER PIPES K & N AIR FILTER IN MISHIMOTO AIR BOX. (COMES WITH MISHIMOTO INTERCOOLER - NOT FITTED) COBB CUSTOM TUNE & HAND HELD CONTROLLER. LED SHIFT LIGHT. "AUTO THROTTLE BLIP" FITTED FOR DOWN SHIFTS. X-FORCE TURBO BACK EXHAUST WITH REMOTE CONTROL REAR MUFFLER FLAP. 257 WHEEL KW'S. QUAIFE FRONT LSD (F

XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to

1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

Caged to CAMS rally spec 2ltr Zetec 200hp piper cams Jenvey fuel injection Emerald ECU PWR radiator 2x gearboxes. 1 x T9 5 speed( new ) and T3 4 speed Wilwood front brakes Compression struts Atlas diff 2 link plus panhard rod GAZ shocks Capri front struts AVO steering wheel All instrument fiber glass dash 4 Rebel wheel and 4 Hustler wheels RS200 decal kit and badges Just about everything needed

Ford Capri Drag Car Super Sedan or Top Sportsman car. 427 Ford Windsor, 2 speed glide, Full chassis 4 link rear end. 9 inch, 35 spline spool & Mark Williams axles, Strange front & rear brakes, new radiator, MSD power grid ignition. Racepak data & dash, pro cube delay box, fire system, all new tyres, new paint, fibreglass complete front clip, Too much to mention Car is very consistent over the 1/8 mile & 1/4 mile. Andra & ihra current tech's Car is in excellent condition Not getting out of the

Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.

Mk2 Ford Escort 2lt, log booked, worked 2ltr pinto, forged ceramic top pistons, cosworth rods, twin 45 Webber's and much more, for full details contact Steve.