72 Circuit Racing for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
31
Roll CageLog Book
This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash CAMS approved/ complied roll cage Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manua
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
3 1
Roll CageLog Book
Improved Production RX3. 13B O'Dell Fontana bridge port. Laird manifold. Motec. Aim dash with full logging. 5 speed dog box. Hilux rear end, floating axles, cambered. MCA 3 way adjustable gold shocks. Spare set of wheels, flares, spoilers and moulds. Wilwood brakes.
13
Roll CageLog Book
Delivered new by McLaren GT in December 2016. New engine installed in May 2018, has less than 1300 kms. New gearbox installed in January 2018, has less than 3,300 km. All MGT upgrades for the 650S GT3 included in this car. Maintenance, lifing records, mileage, other documentation and vehicle viewing all available upon request. Last raced Phillip Island in 2018 and has since been privately owned with minimal private track day usage. Vehicle maintained by McElrea Racing / MR Tuning. Come
16
Roll Cage
McLaren 570S GT4 track car, never raced. All maintenance logged & updated as required by factory guidelines. Fully maintained by Zagame Motorsport. McLaren suspension upgrades done by Zagame 7100kms Passenger Seat & Harness Air Conditioning (standard on McLaren GT4) Car Cover 2 x sets of additional spare wheels with new slick tyres Car is delivered on a rain tyre set. Wheel nut socket & air jack spike Spare brake rotors & pads Fully prepped ready to use on track
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
10
Roll CageLog Book
MAZDA RX7 - BUILT IN 2016 - CAMS LOG BOOKED ROLL CAGE BUILT FOR RELIABLITY -13B BRIDGEPORT 2ND PLACE BATHURST CHALLENGE 2019 1ST PLACE OVERALL REPLICA TOURERS 2021 NEW ENGINE BUILT BY SIMON @ MACGREGOR MECHANICAL NISSAN SKYLINE FRONT BRAKES INJECTION PERFECTION MICRO TECH DASH SERIES 3 LIMITED SLIP DIFF - STRONG RELIABLE CAR VN COMMODORE RADIATOR KEEPS THE CAR COOL - PLUS EASY TO GET. NEW FUEL PUMP UPGRAGED SET UP. LIGHT WEIGHT COULD EASILY ADD GROUP C FLARES & WHEELS FOR A MOCK UP. PLENTY OF
20
Replica Project Body is new, as are the wheels. Both exact reproductions of the original. The tub componentry, patterns and drawings are for a full monocoque structure as per original, not a tube frame. Front and rear hubs are for patterns. The drawings are all working drawings done professionally by various sources. Please ask any further questions for more information. Shipping around New Zealand can be easily arranged. International shipping can also be arranged, a quote can be pro
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $9900
7
WAS $75,000. PRICE Further REDUCED TO $65,000. This is a Lotus 23B that was re-bodied with wider wheels and body by John Harvey in the UK in 1968. It has history in the UK and Germany before I imported it to Australia in 1996 when it had a full back to bare chassis rebuild. The car is very competitive holding the Group O lap record at Morgan Park and has had many outright and class wins including the Jill Patterson Motors Trophy (EC), Queensland Tourist Trophy and several Lionel Ayres trophies.
5 1
Roll Cage
Honda EG civic hatch race car, Built towards time attack and circuit races. Currently the fastest FWD car in W.A - Barbagallo raceway (58sec) and Collie raceway (1.11sec) with plenty more in it. Sleeved and built k24 motor making 580hp (only ran for 4 events and just had a check over with new fluids) Quaife Sequential gearbox (new) Elite racing baffled sump KAZZ 1.5 way diff DBW throttle setup traction control launch control MCA Red coilovers with custom spring rates with spare springs, New S
10
Roll CageLog Book
This car is part of Australia Motor Racing History. There is no doubt this car will be a future classic and a great investment, as this model is no longer being built. Introduced into Australia in 2004, for the premier single make race series for MoPro Australia, the Kumho tyres Lotus challenge. This series supported the V8 supercars at Bathurst. This car is a Multi trophy winner on Circuit, Street Sprints and Hill Climbs. Fitted with CAMS certified roll cage and has a CAMS logbook. Car could po
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
10
Roll CageLog Book
Health circumstances force sale. First raced 1985. Have original log book. Needs paint, alloy, windows and you've got yourself an amazing car. Has 13b peripheral port RX7 Series 4 five speed, new Hilux diff. Koni suspension. Lots of new and used parts included to finish. Lots of spares as well. Has been undergoing restoration but I can't finish it. Would love to talk to potential candidates. Would consider breaking up everything and selling separately. $16,000 or nearest offer.
9 1
Roll CageLog Book
Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Lots more pics here https://www.dropbox.com/scl/fo/in3bfqwjsf82gsbn3cn1b/h?rlkey=ti3snaesjilgakocndpv7q2j7&st=i3k76t7r&dl=0 Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to
6
Roll Cage
Lotus Europa 47 copy. Professional space frame chassis and suspension. (Borland Racing Developments) Fully welded in roll cage. 2.0l Duratec engine on injection 200 + hp ,dry sump and 5 speed Hewland gearbox. Very quick track car in immaculate condition. 670kg wet. Some spares and jigs go with the car. Ready to race. Closed in Trailer also available. Can be seen running at PI Historics 7-9 March 2024 Phone Derek McDougall 0408544388 for price and more info.
10 1
Roll Cage
For Sale - Price reduced and is negotiable - Production Sports Car MX5 NB8A track day special. This naturally aspirated 1.8L DOHC engine has never let me down. This car was built by Automotive Plus, and due to its unique sound down the straight has been a head turner at SE Qld race tracks An extensive list of items are below: BC BR Coil overs - adjustable dampers, adjustable ride height BBS RG359 RG-F Wheels, 15x7 wrapped in Hancook Ventus C51, medium compound twin groove slicks. 205/50Z