90 Motorsport Vehicles for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
Featured ads
All Results
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
40
Roll Cage
2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
5
Roll CageLog Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
7
WAS $75,000. PRICE Further REDUCED TO $65,000. This is a Lotus 23B that was re-bodied with wider wheels and body by John Harvey in the UK in 1968. It has history in the UK and Germany before I imported it to Australia in 1996 when it had a full back to bare chassis rebuild. The car is very competitive holding the Group O lap record at Morgan Park and has had many outright and class wins including the Jill Patterson Motors Trophy (EC), Queensland Tourist Trophy and several Lionel Ayres trophies.
6
1997 R33 GTR 16x,000 kms R35 coilpacks with Raceworks billet bracket HKS Coilovers Twin plate clutch Wedsport TC105 New S3 Front lip Oil filter re-location Ganador side mirrors Momo Monte Carlo wheel (will come with stock steering wheel) Based in Melbourne but happy to assist with transport
5 1
Roll Cage
Honda EG civic hatch race car, Built towards time attack and circuit races. Currently the fastest FWD car in W.A - Barbagallo raceway (58sec) and Collie raceway (1.11sec) with plenty more in it. Sleeved and built k24 motor making 580hp (only ran for 4 events and just had a check over with new fluids) Quaife Sequential gearbox (new) Elite racing baffled sump KAZZ 1.5 way diff DBW throttle setup traction control launch control MCA Red coilovers with custom spring rates with spare springs, New S
10
Roll CageLog Book
This car is part of Australia Motor Racing History. There is no doubt this car will be a future classic and a great investment, as this model is no longer being built. Introduced into Australia in 2004, for the premier single make race series for MoPro Australia, the Kumho tyres Lotus challenge. This series supported the V8 supercars at Bathurst. This car is a Multi trophy winner on Circuit, Street Sprints and Hill Climbs. Fitted with CAMS certified roll cage and has a CAMS logbook. Car could po
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec
10
Roll CageLog Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,
12
Roll CageLog Book
Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,
3
Roll CageLog Book
1984 Nissan Bluebird 910 for sale. Located in Adelaide. Car is built as Club rally Car - needs finishing off. Approved roll cage and MA Log Book (PRC). L20B 2 litre motor with 2x Webers, 76 degree cam, alloy radiator. Rear end R30. Complete car $10-15 K depending on what comes with it, or car without engine and gearbox $ 5K.