133 items for sale

MODEL - SR8RX - 680kg ENGINE - RPE 2.7L V8 Hayabusa -400hp GEARBOX - RPE P-Tec Quaife six-speed sequential gearbox TWICE AS MUCH FUN AS AN SR3 The SR8 is a truly exhilarating drive, powered by a bespoke Radical V8 engine with physics-defying grip od 2.2G's, relentless acceleration and powerful brakes.RPE's base engine is a 2.7 litre revving up to 10500 RPM producing 400 horsepower standard with a tuned variant available to take you up to 440 horsepower. Formula 1TM ‘style’ paddle-activated

A unique opportunity to own the flagship car of the Radical model range. The Radical RXC Spyder is the ultimate track day and/or race car. Probably one the fastest track cars in Australasia. Eligible to race in the Australian Prototype Sportscar Racing Series or NZ Sportscar Racing Series. Super quick car with full aero body and incredible power to weight ratio at only 1,000 kg and producing 650 bhp from the V6 3.5 litre Ford Eco Boost twin turbo engine. Easy to drive, suits drivers of all ski

2010 Holden Statesman WE Sleeper Can be driven on open road Takes E85 only, set up for dragging 402 iron block with Borg Warner turbo Turbo 400 gear box Comes with tyres and rims to drag 14 psi, 868hp at the hubs, 10.8 sec quarter mile. Good condition, one owner only. Registered on road, genuine sleeper. $65,000 ono.

AMAZING OPPORTUNITY. Buy my car and have the peace of mind and handover experience like no other. Fast. Reliable. Competitive current race ready car, had a race win and finished 3rd outright in the 2023 Australian Prototype Series with an old grease monkey driving it! I want to sell the car to someone that will keep racing it with the APS and I want you to do well so will sell it all set it up as I have run it as if it were still my own, no secrets and all help! RPX 2.7 with only 24 engine lo

Holden LX Torana 4 Door Complete bare body Shell. All rust removed from body shell, new sills, A pillars, floor, boot, etc etc. Repair invoice available on request. All body deadener removed. Body has been stich welded. Wheel arches not done due was going fit race flairs. Body in bare metal and rust coated. Drivers door slight mark. Body ready for roll cage.

LS2 , 460RWH. 5 Speed Tremic, 9 inch . Power steering. Log booked. Good reliable car.

FOR THE FIRST TIME IN OVER 15 YEARS, WE ARE PROUD TO PRESENT PERKINS ENGINEERING HOLDEN COMMODORE V8 SUPERCAR PE036! 1999 PE036 Castrol/Perkins Engineering V8 Supercar “Silver Bullet” driven by the Enforcer Russell Ingall. Bodied as the road going VT commodore, this amazing machine was the forefront of the V8 touring car series in the year 2000. Larry Perkins with his Castrol sponsored holden Commodores always proved to be a crowd favourite. PE036 debut to the V8 touring car series was proving

Historic Gemini Coupe Sports Sedan. Originally built by John Brookfield for Peter Brock, circa 1977. Previous owners include Rowan Harman, Robin Doherty, Darren Hossack, Grant Munday, Stephen Craig. ENGINE:- 13B Extend Port FD Series 6, Ceramic Apex Seals, Balanced and matched rotors, custom exhaust manifold, modified inlet manifold, Full Throtle Engineering crank sensor, Bosch Motorsport 2000cc injectors, OS Giken triple plate clutch, Borg Warner 91/74 alloy core turbo, 1.45 twin scroll exhaus

Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.

2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg

VS SPAC LS1 AUTO. $25,000 Freshly finished and converted LS1 auto 4l60e. Top end rebuild on the engine, cam, heads shaved and rebuilt, new double row timing chain, oil pump, lifters and springs. New Manifold, radiator, rebuilt auto, 3000 dominator stall, new front and rear brakes and front shocks, new steering rack and new tailshaft. Brand new rod shop conversion kit and new exhaust. New fuel reg, lines and fittings. New in tank walbro pump, new manifold. New mini low mount A/C pump installed

MASSIVE PRICE REDUCTION FOR QUICK SALE. BEST VALUE RADICAL ON THE MARKET - NEW RACE CAR ON ITS WAY SO NEED TO CLEAR THE SPACE Well optioned 2009 SR3 RS with NEAR NEW engine/gearbox. Full carbon aero pack, data pack, brake and shock upgrades & manual motorsport systems flat shift. Car has a number of 2012 upgrades including side pods, rear exhaust & data pack. Car has just undergone full service by J&S Motorsport (can send invoice of work completed) so car is ready to hit the track. SPECIFICA

Class C 3E Production Car Well Sorted car for National Production cars Series State Level Production cars or Bathurst 6hr 2nd Place 2022 Australian Production cars Championship Dry Break Full system and Enduro Tank Sparco Full Containment seat Enduro Belts SS Mandrel Exhaust Brand New Gaz Double adjustable Shocks Enki Rims with assorted semi Slicks Hankook and MRF plenty of life left for test days/Practice or state racing Krontec Quick release Fresh Balanced and Blue printed engine to 3

Radical SR3 with Aim HD Camera System. 8 Wheels. Pit Radio System

It’s Phill Brock’s drive car and Ex Commodore Cup car. Done in 25 colours which was the Bathurst winning car. Phill Brock was gonna use it for drive days but didn’t make it. He drove it on a club meeting. It’s in excellent condition and it’s been sign written by Perter Brocks sing writer. It’s got fresh engine. Feel free to ask any questions.

Call Kevin 0418538961 Open to offers. Car is located in Melbourne LJ Torana 2 door Sports Sedan. Only used for sprint days at Sandown Raceway, Melbourne. Motor has only done 2 sprint days since rebuild by Hocking Engineering. Originally cost to build the engine was $30K, 350HP at the wheels Cams approved roll cage Log book 3.8 V6, dry sumped, injection, scat crank, argo rods, roller rockers, heads worked T5 Gearbox Weight is about 1100Kg Fibreglass doors, bonnet and boot lid. Lexen windows P