38 items in Australia between $30,000 & $50,000 for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
All Results
14
Registered
1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit
10
Registered
FOR SALE 400kw EVO X BATHURST EDITION TMR (ADM) - Comes with spare single Titanium SMB Exhaust Tip - Comes with a recirculating pipe which can be easily clamped on if pinged for Loud Exhaust - Reconditioned Front CV Joints - Serviced every 5,000 kilometers for minor service and every 10,000 kilometers for full service. - Tuned with 2 modes – which both Runs on E85 Only – Last Tuned by Elite Pro Tuning - Low Boost: 28PSI – 380KW - High Boost: 35PSI – 425KW Part List: - Nitto 2.2L Stroked - GS
6
Roll CageLog Book
Evo 5 CP9A production touring log booked currently running in Improved production and combined sedans. Brand new Engine built by Dashsport with new Evo 9 turbo and manifold just run in and tuned. State spec welded cage with dual fuel tanks currently running on 98ron but is E85 compatible. Reflashed ecu, RS drivetrain with Ralliart front diff. AP front calipers and Brembo rears. Quick reliable car with top finishes in NSW and QLD Production car championships.Ideal for tarmac rally also. 3 sets of
8
Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.
20
Registered
Genuine Fully Built FQ360 Only a limited number of these released in the UK market Personal Import from the UK in 2014 55,000 miles (92kms) FQ360 original carbon front and rear lip as well as FQ360 interior in great condition 2lt 5 Speed Manual (Built by Neat Gearboxes) Tomei Cams ARP 625 Head Studs Nitto I Beam Rods Nitto Pistons Upgraded Timing Chain Turbo 1 Manifold Garret 3071R Invidia Exhaust FIC 1350cc Injectors K-Sport Coilovers Twin Plate Extreme Clutch Mishimoto Intercooler Work ZR10 18
20
Roll Cage
Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount
10
Roll CageLog Book
VS commodore cup car. Built new by Dean ORR of Perkins Engineering, and never raced as class was cancelled prior to completion. The shell was a NOS lightweight shell with no Holden VIN or chassis number. Running 253 Gene Cook race engine. Aluminium Commodore Cup car heads. Super T10 PPG dog box full floater differential Alcon 6 spot brakes. AIM dash. Race Tech seat PWR radiator. Currently Logged as improved production but most suited as entry level sport sedan. Car has only completed in a hand
59
Registered
The Holden Special Vehicles SV5000 was a proper V8 bruiser and was built in very limited numbers (359 in total) between 1989 and 1991. Based on the VN Commodore, the SV5000 started life in Holden’s Elizabeth plant in South Australia before being transferred to the boffins over at HSV, who were located in Notting Hill in Victoria at the time. This particular SV5000 is finished in SV Racing Green, one of only a handful of colours available on the SV5000 model. Both inside and out this SV5000 prese
10
Roll CageLog Book
1961 Elfin Zephyr Special. No.14 of the first 23 Elfin's ever made. Built by Noel Heard & Gary Cooper using a 2.6 L Zephyr 6 cylinder motor. Noel raced it in the 1961 Grand Prix. Won many hill climb championships, this is a great piece of Australian motor racing history. Noel completely rebuilt the car in 1998. The car has been used very little since. It is logged as a group M car with many photos & trophies. Sadly, Noel Heard is no longer with us but he was a wealth of information about the car
9
Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000
10
Registered
Registered on road, genuine sleeper Runs on E85 only, 402 iron block with Borg Warner turbo. Turbo 400 gearbox, transbrake with two step. This car is a sleeper, good condition. Comes with tyres and rims for drag racing. 14 psi 868hp at the hubs, 10.8 Single owner
10
Roll CageLog Book
Mitsubishi Circuit/Tarmac Rally EVO 5 RS Mark King's original 2000 Australian Production Car Championship winning car. Immaculate condition. This car is prepared for circuit racing but also comes with German H&R height adjustable coil over and sway bars for tarmac rally. New Dashsport motor and turbo New 712GTP turbo on mandrel manifold Heavy duty racing clutch and pressure plate Moroso alloy racing sump Full Motec dash Hypertune exhaust manifold Titanium 2 1/2" exhaust PWR racing radiator ATL
5
Brand new Mirage Proto/G4 body set up for Evo X, has R5 style steering column, Lexan window kit, R4 strut towers for longer travel, carbon door cards and roof vent. Fully painted and ready for assembly. Import duties and import certificate are paid and completed.
10
Roll CageLog Book
This car is part of Australia Motor Racing History. There is no doubt this car will be a future classic and a great investment, as this model is no longer being built. Introduced into Australia in 2004, for the premier single make race series for MoPro Australia, the Kumho tyres Lotus challenge. This series supported the V8 supercars at Bathurst. This car is a Multi trophy winner on Circuit, Street Sprints and Hill Climbs. Fitted with CAMS certified roll cage and has a CAMS logbook. Car could po
4
Roll CageLog Book
2001 Mitsubishi Lancer Evolution 7 RS (Evo VII) Log booked as production touring car 3E, fun and low maintenance competitive car Fresh motor that has only done 3 race meetings with a larger baffled sump, tuned, MCA red suspension, Haltech dash, ducted brake cooling, Cams approved Bonds roll cage, additional fuel tank in the boot with a swirl pot and bosh fuel pump and much more.. Will include a 2 sets of spare wheels (evo 7 and evo 8) and some race-day spares
15
RegisteredRoll Cage
Amazing 1.9ltr DC2 - Motec M1, Dart block, Golden Eagle crank and Rods, Wiseco pistons. Built for boost... and to be a reliable track engine.. currently turned NA.. Toda headers.. Built by JHH - see image of JHH stamped engine. All Ferrea heads components , over sized valves, 1000cc Injection Dynamic injectors ATS Carbon clutch ATS LSD Skunk cams Spoon brakes Tein Super racing coil overs, with external reservoirs Cusco sway bars All bushes changed with Hard Race bushes. Unfortunately only s
4
Selling my 2.4l stroked evo 6, engine has just been fully rebuilt by Craig at Aurora Speed not a cent spared in the build. Car is currently not running as it needs engine wired up and a tune I’ve just lost interest in the car and need a car more suitable to get around on the daily my loss your gain, the engine build its self was over 20k+ Has brand new Excedy heavy duty clutch (put in with motor) Aftermarket lower rear control arms And plenty of other little added extras I’ve done to
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to
10
Roll CageLog Book
VL Calais - Drag Car Roller Set up for SBC and glide Comes with, engine plates, pipes & tail shaft to suit. Full Chassis 4 Link Drag Car. Setup by John Willard @ Flatout Services. Funny Car Roll Cage. ANDRA & IHRA Tech Front Race Struts. Mark Williams Diff Center with new 4.56 gears 35 Spline MW Axels. Koni Drag Race Double Adjustable Rear Shocks. Adj Wheelie Bars Custom Alloy Fuel Cell Wiring, Shifter with Dedenbear shift solenoid, Gauges, MSD 6AL, Chute, Harness, Window Net etc. Wil
10
Registered
Holden VZ SS Crewman L76 Gen 1V 6.0 Litre T56 6 Speed Manual 2006 Model Currently 520.8 RWHP ready for a retune to get the 650hp reliable its setup for if you wanted to. ENGINE WORK ProCharger D – 1SC Intercooled Centrifugal Supercharger Siemens / VDO 63lb per hour fuel injectors & custom fuel rail’s & fittings 044 fuel pump , surge tank & regulator , mounted underneath the car Pacemaker 4 into 1 ceramic coated extractors 2.5’ stainless steel twin system & high flow cats & dump tips Crow Cam 21