36 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
8 1
Roll CageLog Book
Have my eye on another car so this one has to go. Been in development since 2017. Has raced in Targa West twice, Targa South west, Rallysprints, Racewars, Time attack and now Circuit racing.Full tech details in pics. Have all the parts to switch it back to Tarmac rally specs plus a comprehensive spares package including another set of wheels, diffs, gearboxs, drive shafts etc.. Has done a 61.04 at Carco.com raceway and has won multiple street car rounds at Collie and Wanneroo. Fastest rotary at
14 1
RegisteredRoll Cage
Predator Ute up for sale as seen in NZV8 magazine. Fully certified for road, current WOF and Rego. This Ute is a one off and built extremely well. Regular maintenance carried out since I have owned it from 2020. Genuine reason for sale. This Ute went from Moyes Holden and got fabricated. Ute runs cool and well. 720hp, 10lb boost, nitrous no longer hooked up (bottles still in Ute). YouTube video attached rom NAC Car Culture - Ute is on from running time 1-minute in the video. Engine- 400 Small
7
RegisteredRoll Cage
Street Registered Full Bridgeport , doweled, 13B turbo RX7 manual FC Series 5 Turbo GT Edition Lots of brand new parts: * As new custom paint/wrapped * Modification plate for half roll cage and 2 x seat conversion * Big single turbo conversion, custom exhaust * Brand new full parts shop max steering and camber upgrade, front and rear, including coil overs * As new PWR 55mm radiator with heavy duty SPAL fan * As new PWR oil cooler with new SPAL fans * As new PWR street series intercoole
10
Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.
26
2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg
14
Registered
VS SPAC LS1 AUTO. $25,000 Freshly finished and converted LS1 auto 4l60e. Top end rebuild on the engine, cam, heads shaved and rebuilt, new double row timing chain, oil pump, lifters and springs. New Manifold, radiator, rebuilt auto, 3000 dominator stall, new front and rear brakes and front shocks, new steering rack and new tailshaft. Brand new rod shop conversion kit and new exhaust. New fuel reg, lines and fittings. New in tank walbro pump, new manifold. New mini low mount A/C pump installed
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
10
Roll Cage
Set up for drag racing 13b turbo engine - 640 rwhp (last dyno) Power glide gearbox (newly rebuilt) with 7500rpm stall with bump system Microtech LT10s ecu - 3 bar & 2 step Handmade 9" diff, Mark Williams alloy center 35 spline axels 4.8:1 4 link suspension and coil-overs not pictured: wheelie bars, parachute
10
PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l
6
$35,000 as a roller OR $50,000 as a complete car 1/2 CHASSI CAR series 6 bridge port turbo Air shifted liberty Floating 9" 4 link rear Koni's plenty Shocks and sway bar Runs easy low 8's plenty more in combo MW Ignition Data Logger new parachute new front tyres new rear slicks new harness Andra and IHRA TECH INSPECTED
5
Roll Cage
VY Commodore Drag Ute. Drop an engine setup, ecu and converter in and go racing. Has Coan built T400, Harrop full spool 1000hp rear end, 3" 2 piece chromoly tailshaft, 7 point chromoly cage, chromoly front end, chromoly v6 k frame (can buy LS mounts to suit), wilwood booster delete master cylinder, full fire suppression system, drag bags in the rear, custom built light mags 4" fronts 10" rears, light weight brake rotors and callipers, fibreglass bonnet and doors, perspex front and rear windscree
3
20B PAC race engine Billet centre plate Billet 2 piece crank Tail 60mm wastegate Blackbox computer Big Garrett turbo Front mount cooler Dry sump setup Methanol Extra injectors Gforce5r manaul gearbox 9inch full spool diff mark Williams 35spline axles Willwood brakes Deist parachute Fire system Funny car cage Alumastar wheels To many things to list Car has gone a best of 7.6 @ 187mph No time wasters or low ballers please
1
2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.
7
1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers
10
Ex F1 Celebrity Challenge car. Built by Mark One Engineering for endurance racing. Built to run in Aust Manufacture Championship and any other Production car championship. - Dry Brake Fuel System - Motec C125 Data Dash - AP Racing Brakes - Tein Race Suspension - PWR Radiator - Race Comms - Boost Logger No expense spared, regretful sale due to business commitments.
54
They don’t get much wilder than this!! An out of this world take on the iconic Holden One Tonne ute!! Personally built by the current owner and now ready to be enjoyed and showed by the next owner. The whole car is impeccably detailed with hundreds of hours invested into making this car stand out from the crowd. From the 800+ horsepower 540 big block Chev and the totally unmissable 10/71 Blower Shop blower with full billet hat!! The custom blue metallic paint, HZ front clip, custom interior and