26 items in Australia between $30,000 & $50,000 with Roll Cage for sale

This RS is a CAMS log booked ex-Targa Rally car and mod plated for all modifications in the car shoudl you want to register it for the road (half cage mod plate, front legs need to come out for roadworthy to re-register, easy bolt in job). Details: - 22,000 kms - Head Gasket recall done at Ford - Velo driver and passenger seat with Velo 6 point harnesses all in date - AGI National Rally Spec Roll Cage (CAMS certified) - MCA Custom Red Series Coilovers with multiple spring rates supplied with th

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Log booked 3E Production Race Car and 2018 model Phoenix Tilt car trailer, including all spares as listed below Engine rebuilt in 2023 CP Bullet Forged Pistons and H beam Conrods ACL Race B/E ACL Race Main 360 deg 12mm APR 2000 head studs APR Main studs Barra Oil Pump backing plate Billet Oil Pump Gears Kelford Cams KV218A Kelford Valve Springs KVS4 Factory Rockers and Rollers New water pump All new pulleys All receipts for engine build will be provided. I have had the pleasure of ownin

2005 ba falcon xr8 Car has following: Motorsport Australia logbook 3j improved production -fresh 5.4ltr engine with only dyno time -T56 6 speed gearbox with new ceramic clutch and lighten flywheel -4 into 1 pacemaker headers with 4 inch side exit exhaust -brembo 4 pot front brakes with pbr rear -HSD coilovers allround -Adjustable sway bars front and rear New Nolathane bushes in rear cradle with adjustable control arms -Front camber kit -2 sets of Koya SF05 wheels 18X9 front 18X10 rear with slic

Caged to CAMS rally spec 2ltr Zetec 200hp piper cams Jenvey fuel injection Emerald ECU PWR radiator 2x gearboxes. 1 x T9 5 speed( new ) and T3 4 speed Wilwood front brakes Compression struts Atlas diff 2 link plus panhard rod GAZ shocks Capri front struts AVO steering wheel All instrument fiber glass dash 4 Rebel wheel and 4 Hustler wheels RS200 decal kit and badges Just about everything needed

NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

1962 MORRIS MINI 850 FITTED WITH FUEL INJECTED YAMAHA R1 AND QUAIFE LSD HALTECH ECU FIBREGLASS LIFT OFF FRONT HALF ROLLCAGE VENTILATED ROTORS WITH 4 SPOT CALIPERS FRONT COILOVERS 2 FUEL TANKS HIGH AND LOW PRESSURE FUEL PUMPS 3 PIECE ALLOY WHEELS FITTED WITH HOOSIER TYRES 2 RACE SEATS 2X 5 POINT HARNESS NSW ENGINEERING PAPERS WAS REGISTERED IN NSW CURRENTLY REGISTERED IN QUEENSLAND

Current IHRA tech inspection and logbook. Selling to progress dragster. Tunnel ram Methanol injection on stroker SBC. Motown block, runs a cooling system as well. Racer pro heads and manifold. Trans brake PG transmission and full floater sheet metal 9". Has delay box and solenoid shifter. Turn key car runs super consistent 8.5 sec quarter mile. Enclosed trailer available separately. Can separate and sell as a roller, minus engine and transmission for $12K Or car with watertight enclosed tandem

WA Production Car Championship Winner 2022 Season Motorsport Australia Log Booked Whiteline coilovers AGI Rol Cage Turbo Back Exhaust Winmax Pads Velo race seat (3 meets old) with OMP Harness Radum dual catch cans Braided brake lines Oil cooler kit Mountune baffled sump 2x sets of 18" wheels with A050 Tyres More pics will be uploaded soon

Ya-car racing buggy august 2022 built date Motorsport Australia and FIA approved seats and bells in date Can be use on racetracks or dirt events all over Australia Can be sold with a Brain James tilt trailer that will carried the two buggys for extra Chassis – Multi-tubular design, with fiberglass shell. Kart colours and livery design fully customisable to customer preferences. Engine – 600cc Suzuki GSXR motorcycle engine as standard. Suspension – 2-way Adjustable Gotenman shocks. Sta

Turn Key Racing Built RB26 engine with mild cams, custom piping (Titanium Intake). Moderated tune to 586hp RW on e85. Well sorted and proven track car with major suspension component and brake upgrades. Has current Qld Club rego (with Mod Plate). Limited Sprint use only (Lakeside/Morgan Park/ Bathurst). Car has performance well beyond its aging owner but due to retirement (Read No Income) needs a new life. Have a full list of what has been done on this car for those with serious interest.

It’s a Tony Jory Tasmania sport sedan. 600 horsepower V8 Cleavland full race motor. I’ve got the horsepower dyno reading from Dandy engines. Very powerful Car drives well for what it is.

Selling our 2014 Ford Fiesta ST Production Car. This is the 2022 Australian Production Cars Class D Championship Winner. This is a great package that and ready to hit the track. It's a proven winner. 3E Logbook with Motorsport Australia. Car recently ran in 2 days of thunder in Queensland Production cars and in its last race it came 1st in Class D and 10th Outright. Car has a dry break fuel system fitted and ready for endurance races or the Bathurst 6 hour. This car has had a complete refresh

Nissan S13 Silvia with S15 front RB26DETT fresh -7’s Forged internals Nitto oil pump & collar Remote oil cooler & filter Custom catch can & overflow HKS cams (264 9.1) HKS injectors, Bosch fuel pump Custom front pipe & side pipe Motor originally built by Top Fuel Japan, has had rings and bearings done since, linished & straightened crank, new rods & pistons. Nitto head gasket Rb25 gearbox with 26 internals (better synchromesh etc) 200mm xtreme twin plate clutch Nissan 4 pot front brakes DBA roto