SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

23 items for sale

Refine Search

Clear All
Keyword
Category
84
33
16
12
2
2
Price
Minimum
Maximum
Listing Type

All Results

14
Was $76,500$69,950
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Bendigo Victoria, Australia
Share
Watch
15
Roll Cage
No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

Glenhaven NSW, Australia
Share
Watch
16
Roll Cage
Log Book
1956 Ford Crown Victoria Current IHRA & ANDRA Tech and Log book. Was NHRA certified 25.4B (7.50) Chris Alston Chassis Works (USA) "Eliminator II" full mild steel tube chassis, Front Coil over Spindles, Adjustable 4 Bar, Wheelie Bars. Body. All original steel in great condition with no rust Includes front bumper and indicator cowl Powdercoated aluminium interior Lexan windows with factory chrome Cool nostalgic/ratrod look with rusty bumpers, satin black painted body Deep Blue metalflake roof, das

Chadstone VIC, Australia
Share
Watch
5
Roll Cage
Log Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Adelaide SA, Australia
Share
Watch
19
Roll Cage
XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)

Cairns QLD, Australia
Share
Watch
7
Registered
Log Book
1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

Mudgee NSW, Australia
Share
Watch
17
Ford Capri Drag Car Super Sedan or Top Sportsman car. 427 Ford Windsor, 2 speed glide, Full chassis 4 link rear end. 9 inch, 35 spline spool & Mark Williams axles, Strange front & rear brakes, new radiator, MSD power grid ignition. Racepak data & dash, pro cube delay box, fire system, all new tyres, new paint, fibreglass complete front clip, Too much to mention Car is very consistent over the 1/8 mile & 1/4 mile. Andra & ihra current tech's Car is in excellent condition Not getting out of the

Tullamarine VIC, Australia
Share
Watch
9
Was $47,500$44,500
Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.

Nelson Bay NSW, Australia
Share
Watch
19
Registered
Roll Cage
Log Book
NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

Gleneagle QLD, Australia
Share
Watch
6
Roll Cage
This is a nitro nostalgia funny car called the WARHORSE it runs 5.70 at 251 mph . Three motors, 2 speed Lenco. lots and lots of parts 2 bodies everything must go. truck and trailer also available for $50,000 USD. Call for complete listing 951-237-7501 (California time)

California, USA
Share
Watch
9 1
Roll Cage
Log Book
Current IHRA tech inspection and logbook. Selling to progress dragster. Tunnel ram Methanol injection on stroker SBC. Motown block, runs a cooling system as well. Racer pro heads and manifold. Trans brake PG transmission and full floater sheet metal 9". Has delay box and solenoid shifter. Turn key car runs super consistent 8.5 sec quarter mile. Enclosed trailer available separately. Can separate and sell as a roller, minus engine and transmission for $12K Or car with watertight enclosed tandem

Ormeau QLD, Australia
Share
Watch
9
Roll Cage
Log Book
NISSAN 300 ZX ROLLER, NO ENGINE OR TRANS FULL TUBE CHASSIS FOUR LINK REAR LIGHT WEIGHT SPINDLE MOUNT FRONT WHEELS 9 INCH DIFF WITH FULL FLOATER 40 SPLINE AXELS CENTERLINE CONVOPRO WHEELS BUILT FOR SUERSTOCK GAS CLASSES RAN 9.0 SECONDS 150 MPH IN D/GAS WEIGHT WITH 300 CUBIC INCH ENGINE WOULD SUIT TURBO CHARGED CLASSES

East Moonta SA, Australia
Share
Watch
17
Roll Cage
Log Book
xbody Mustang Drag car 383 Cleveland, chi heads and intake Mechanical injection new waterman’s pump T400 box with trans brake Methanol Ice Ignition with 2 step Current andra teched cage Tube front end, front clip Coilover front and rear 4 link rear Weld rims Just had tuned at just over 500rwhp Runs consistent low 6’s 1/8 and mid 9’s 1/4 Well sorted turn key car

Adelaide SA, Australia
Share
Watch
12
Roll Cage
Log Book
R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also have a Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage, Fire bomb. radio fo

Brunswick East VIC, Australia
Share
Watch
5
Roll Cage
Log Book
1980 ford xd falcon drag car New car has arrived wanting to move on asap Factory 351 manual 9 inch car Very clean car absolutely no rust paint in mint condition Would keep the car but I have another project and can’t keep two cars. 393 Cleveland has had freshen up. Two passes old. Mechanical methonal injection Fuel system has had overhaul same time as engine C4 transbraked reverse pattern auto Strange 9 inch diff (4.3) setup with ladder bar suspension and adjustable shocks Car run

Bunbury WA, Australia
Share
Watch
8
Funny car 1955 Ford Thunderbird Chrome moly 125” wheelbase, 20.5” hoop Car has run low 6’s in supercharged outlaws Current IHRA tech Chassis & Seat painted black 40L fuel tank / 15L oil tank / Puke tank powder coated black 4 wheel disc brakes Weld Magnum fronts 24/5/15 tires Weld Magnum beadlock rears, Hoosier slicks 34.5/16/17 floater rear housing MW axles 40 spline Adjustable Chromed wheelie bar C02 bottle Oberg oil filter Computer box with 12v Battery Aluminium throttle pedal and cable Ne

Fraser ACT, Australia
Share
Watch
5
Roll Cage
Ford 1 Tonner drag Ute Full rollcage B&M Shifter Autometer Gauges Autometer Shift Light race seat & 5-point harness Hoosier Rear Slicks Upgraded Rear end. Upgraded Tail Shaft Comes with many additional spares. Contact Karen for more details

Cessnock NSW, Australia
Share
Watch
14
Roll Cage
Z31 professional strip down to body shell , painted , roll cage installed & built by race car manafacturer for racing , Car has completed many Targa Tas & Targa events , circuit racing and Hill climb & various other forms of motor sport events , fully rebuilt low compression engine , forged internals , large pelenium manifold , custom ECU , oil , fuel & power steering coolers , Adjustable height & firmness control hydrolic dampners on all corners , massive tripple piston GT Racing calipers with

Gold Coast QLD, Australia
Share
Watch
4
Roll Cage
Log Book
1927 Ford Roaster Drag Racing Car Engine: 383 Small Block Chev Gearbox: Powerglide Rear end: Strange housing and center with pro gears Chassis: Complete CM4130 chassis For photos go to www.cacklingpipes.zenfolio.com and search number 2360 or feel free to contact me with any questions.

Cessnock NSW, Australia
Share
Watch
7
Registered
race ready no expense spared r35 cams approved cage terra trip rally safe Stilo full KW canister shocks fully adjustable just been rebuilt worth $$$$$ full just jap gear box with gear set 11 plate clutches billet baskets Dodson at a cost of $25000 exchange about 2 events old billet front Dif housing hard race adjustable rear arms hard race front top arms rose jointed adjustable rear adjustable front adjustable sway bars and bushing winged seats fire bomb plumbed in engine and feet akropovi

Klemzig SA, Australia
Share
Watch