122 Circuit Racing for sale

This RS is a CAMS log booked ex-Targa Rally car and mod plated for all modifications in the car shoudl you want to register it for the road (half cage mod plate, front legs need to come out for roadworthy to re-register, easy bolt in job). Details: - 22,000 kms - Head Gasket recall done at Ford - Velo driver and passenger seat with Velo 6 point harnesses all in date - AGI National Rally Spec Roll Cage (CAMS certified) - MCA Custom Red Series Coilovers with multiple spring rates supplied with th

N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

Ford Falcon Supercar - refitted as a BF. Currently running in Sports Sedans as 3D Roush Yates Ford Nascar D3 358 engine making 825 HP with low hrs since re-build Motec M150 ECU Motec C125 Dash Motec PDM Holinger RD6 with Holinger paddle shift Tilton Clutch Tilton pedal box AP COTF 18in brake package Ohlins TTX dampers built by AD Racing Shocks Morrison 8 throttle body intake manifold with dirve by wire Dailey engineering dry sump Fire bomb Car is in great condition A fast car ( top 10 finish in

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

Aussie Race Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purposes built tilt trailer with winch. Sydney NSW Log book $18K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185

Race Car Transporter - 45 foot - Fully fitted out - Fits 2 cars. Electric Hydraulic Tailgate (refurbished) - lift up to 2 ton. Honda Generator, Air Compressor, 240 volt lighting and power plugs. Large Fridge Freezer. Stainless Benches and 6 Large Lockable Tool boxes. 20 ton Press. Cabinets and Wheel storage. Battery Charger and internal lighting. LED Lights, new tyres and service. Just had roadworthy and Registration. Australia wide delivery available. Located in Melbourne, heading to Perth next

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams

Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy

FORD FOCUS RS AWD LE Purchased new 2018 - 1 owner. 2018 FORD FOCUS RS LE 2.3 TURBO AWD. MODDED FOR HILL CLIMB COMPETITION. ORIGINAL 3,000 KM'S ONLY (3,000 - NOT 30,000) MISHIMOTO INTAKE & INTERCOOLER PIPES K & N AIR FILTER IN MISHIMOTO AIR BOX. (COMES WITH MISHIMOTO INTERCOOLER - NOT FITTED) COBB CUSTOM TUNE & HAND HELD CONTROLLER. LED SHIFT LIGHT. "AUTO THROTTLE BLIP" FITTED FOR DOWN SHIFTS. X-FORCE TURBO BACK EXHAUST WITH REMOTE CONTROL REAR MUFFLER FLAP. 257 WHEEL KW'S. QUAIFE FRONT LSD (F

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Well known Wynn's Hyundai Circuit Excel race Car Professionally Built by Misch's Excel Garage. No expense has been spared and is built to the highest standard This is a turn key nothing to add race car Motorsport Australia logbook Head built to current specifications Current sealed engine and gearbox with seal sheets Current fuel cover compliancy Current spec and regulation mounted fire extinguisher Misch's radiator Misch's air box and piping Miche's catch can Misch's excel exhaust Oil cooler

2005 ba falcon xr8 Car has following: Motorsport Australia logbook 3j improved production -fresh 5.4ltr engine with only dyno time -T56 6 speed gearbox with new ceramic clutch and lighten flywheel -4 into 1 pacemaker headers with 4 inch side exit exhaust -brembo 4 pot front brakes with pbr rear -HSD coilovers allround -Adjustable sway bars front and rear New Nolathane bushes in rear cradle with adjustable control arms -Front camber kit -2 sets of Koya SF05 wheels 18X9 front 18X10 rear with slic