20 Motorsport Vehicles for sale

Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000

1997 R33 GTR 16x,000 kms R35 coilpacks with Raceworks billet bracket HKS Coilovers Twin plate clutch Wedsport TC105 New S3 Front lip Oil filter re-location Ganador side mirrors Momo Monte Carlo wheel (will come with stock steering wheel) Based in Melbourne but happy to assist with transport

Holden Torana LJ Race Car, or Road Car. Group N race car. Can be converted to a road car. Owner can assist with road registration. Full Log Book with Race history. 202 quality motor with Triple 2" SU's. Fresh M21 gearbox. BMW discs with Volvo 4 spot calipers. Koni shocks. Full steel welded cage. Quality paint respray. Billet fine spline rear axles, matched to mini spool diff. Full braided, tefflon fuel lines and filters; tuned to run on the latest high octane fuels. Brake rotor ducts. FIA

Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car

Brand new 383 Chev Roller engine Hillborn injection, powerglide. MSD ignition, 35 spline maxispool diff 4.33 diff gears, Harrop alloy diff carrier, deadenbear delaybox, chute, Convo Pro rims, the list goes on. Ground up build, bare metal respray, this car is a true steel body car with everything done and ready for its debut run down the 1/4mile. Receipts for engine and work total well over asking price. Further details contact Chris on 0409348441.

The GTR-X was a fascinating concept from the get-go; A fibreglass body, over a steel “ladder” chassis, which may seem exotic to an Australian market, but GM had been successfully using that technique with its iconic sports car, the Corvette, from 1953’s C1. Come 1969, the Corvette had evolved to the swoopy C3 guise, featuring independent suspension, four-wheel disc brakes and wild 427 L88 spec’ motors. Along that 16 year passage, the Corvette’s early mistakes became improvements and a smooth, fa

**PRICE DROP** 2004 Holden VY Ute Drag Car 468 BB CHEV (selling turn key) Monaro front clip, Steel shell & Alfa glass panels. 9 inch rear with 455 nodular 35 spline spool & Mark Williams axles. Macdonald Bros 4 link rear end with sway bar & strange shockers. Light weight K frame with new struts & Wilwood front brakes and master. Advanced headers customs pipes, BG fuel pump, alloy radiator, MSD power grid ignition. 15x14 Weld racing rears & 15x3 front runners. Weighs 2590 lbs without driver.

1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.

Torana Hatchback SL Hatchback project ready to get started! It has just returned from the sand blasters and is ready to start metal and body work. This car is a honest car and presents well without hiding any unknown gremlins. It is definitely the straightest Hatch I have ever seen and before body work has been completed. Has all three tags and matching chassis number. It has rust in the normal areas and I have a number of rust panels to go with the car. It is a genuine 77 LX sl Torana untou

VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun

Here we go, was original 2001 HSV VX GTS300, build number 044 and I started doing some track days and then lots of track days and then NZ Superlaps and now I have a full-fledged race car with rego EDE220 on hold. Engine is an L98 that has been bored and stroked 408CI and delivering 572 RWHP. All engine build sheet and dyno sheet are included in the pics, has Castle headers with 2" primaries into 3.5" MRX side exhaust, inlet is FAST with 102mm throttle body. This is coupled to a 6 speed TTI tra

Sports sedan. Have to sell so I can finish other projects. Recently raced in NSW Hillclimb round on fresh set of A7 Hoosiers. This car has racing history and logbook dating back to 25/3/1982. 265 Hemi 6 mid-mounted. Genuine Hopwood wheels. Fully floating brakes, 10 bolt rear end and Ford single rail gearbox. Plenty of history in this car, and we can put you in contact with its original builder. Motor, genuine 48mm Webers, fuel system, and brakes have recently been re-done, and all electrics from

CAMS LOG BOOKED NO RUST 4 DOOR TORANA BUILT IN MIND OF THE GROUP C A9X APART OF HAVING OVER 500 HP BUILT WITH ALL NEW PARTS GROUND UP. TESTED AT QUEENS LAND RACE WAY 30 LAPS AT 7,000 TO 7.5000 OIL PRESSURE STAYED AT 50PSI 60 TO 70 ON START UP,CAR STOPPED CORNERED DROVE FANTASTIC BRAKE PADS ARE PMU USED HAS CLUB REGO,BUT IS A FULL 100% RACE CAR 308 RACE ENGINE COME RACING BILLET 3.55 CRANK,H BEAM 1.125 RODS,WISCO .020 PISTONS,CLIVE ROLLER CAM,T-BAR CPMP PRO ROLLER LIFTERS,OIL GALLERY DELIVERY

Full roller ready for any engine combinations you wish Nissan Skyline r33 1995 full roller $14,000 Motor an all parts to do with motor is sold Only have the gearbox available If not I will just keep the car As I have owned this car for over 21 years I started building it about 15 years ago and then it was put into storage for over 10 years Car still has got all of its identification plates The rego run out about 16 years ago I believe it still can be registered in south Australia Ch

2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.

1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers