SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

46 items between $30,000 & $50,000 for sale

Refine Search

Clear All
Keyword
Price
$30,000
$50,000
Listing Type

Featured ads

All Results

9
Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000

Gillman SA, Australia
Share
Watch
1
Roll Cage
Log Book
Ex Mirage Cup Car bought with no prior damage, the car was raced in western australia under IP 1600 rules then converted to under 2ltr with no expense spared. Motor: JE pistons Carrillo rods Rubuilers crank Jun Cams Extensive headwork Dry Sump Butler tuned length extractors ( 10 hours on motor, comp is 250 on all cylinders) Gear box: RallyArt close ratio gearset Albins 5.1 crownwheel pinnion Kaaz 1.5 lsd Quatermaster 5.5 inch twin plate clutch ( 10 hours) Car: Motec m400 Custom ali fuel ta

Dunsborough WA, Australia
Share
Watch
10
Registered
Registered on road, genuine sleeper Runs on E85 only, 402 iron block with Borg Warner turbo. Turbo 400 gearbox, transbrake with two step. This car is a sleeper, good condition. Comes with tyres and rims for drag racing. 14 psi 868hp at the hubs, 10.8 Single owner

South Mission Beach QLD, Australia
Share
Watch
10
Roll Cage
Log Book
Mitsubishi Circuit/Tarmac Rally EVO 5 RS Mark King's original 2000 Australian Production Car Championship winning car. Immaculate condition. This car is prepared for circuit racing but also comes with German H&R height adjustable coil over and sway bars for tarmac rally. New Dashsport motor and turbo New 712GTP turbo on mandrel manifold Heavy duty racing clutch and pressure plate Moroso alloy racing sump Full Motec dash Hypertune exhaust manifold Titanium 2 1/2" exhaust PWR racing radiator ATL

Healesville VIC, Australia
Share
Watch
5
Brand new Mirage Proto/G4 body set up for Evo X, has R5 style steering column, Lexan window kit, R4 strut towers for longer travel, carbon door cards and roof vent. Fully painted and ready for assembly. Import duties and import certificate are paid and completed.

Narre Warren North VIC, Australia
Share
Watch
4
Roll Cage
Log Book
2001 Mitsubishi Lancer Evolution 7 RS (Evo VII) Log booked as production touring car 3E, fun and low maintenance competitive car Fresh motor that has only done 3 race meetings with a larger baffled sump, tuned, MCA red suspension, Haltech dash, ducted brake cooling, Cams approved Bonds roll cage, additional fuel tank in the boot with a swirl pot and bosh fuel pump and much more.. Will include a 2 sets of spare wheels (evo 7 and evo 8) and some race-day spares

Pimpama QLD, Australia
Share
Watch
12
Roll Cage
Log Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Helensvale QLD, Australia
Share
Watch
6
Registered
Roll Cage
2000 Mitsubishi Evolution 6 Track car / tarmac rally car This is not some rough old track hump built out of a ugly car. The paint is amazing for its age and was built out of a multi award winning show car Vehicle is complied and can be easily registered. Not a write off etc Vehicle has competed in the Classic Adelaide rally on numerous occasions, Hill climbs and track days Very reliable package and a great entry level car with plenty of performance and safety gear. Vehicle has just ha

Glenhaven NSW, Australia
Share
Watch
4
Selling my 2.4l stroked evo 6, engine has just been fully rebuilt by Craig at Aurora Speed not a cent spared in the build. Car is currently not running as it needs engine wired up and a tune I’ve just lost interest in the car and need a car more suitable to get around on the daily my loss your gain, the engine build its self was over 20k+ Has brand new Excedy heavy duty clutch (put in with motor) Aftermarket lower rear control arms And plenty of other little added extras I’ve done to

Macksville NSW, Australia
Share
Watch
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1

Mount Crosby QLD, Australia
Share
Watch
9
Roll Cage
S13 Silvia drift / track car Driveline: 2JZ-GTE oem spec re-build HKS Cams and gears, Crower valve springs ARP Head studs Tomei sump baffles Fluidampr balancer GTX3584 Pulsar turbo, Turbosmart 50mm wastegate Custom turbo manifold R35 PRP coil kit BPP Fuel rail and 1250cc Injectors, FPR2000 regulator 2x Walbro 460 in-tank pumps Optima battery All Speedflow or BMRS Hoses and fittings Custom catch can Direct Clutch twin plate (new clutch plates 1 event old) Late model TR6060 gearbox

Oakford WA, Australia
Share
Watch
10
Roll Cage
Log Book
VL Calais - Drag Car Roller Set up for SBC and glide Comes with, engine plates, pipes & tail shaft to suit. Full Chassis 4 Link Drag Car. Setup by John Willard @ Flatout Services. Funny Car Roll Cage. ANDRA & IHRA Tech Front Race Struts. Mark Williams Diff Center with new 4.56 gears 35 Spline MW Axels. Koni Drag Race Double Adjustable Rear Shocks. Adj Wheelie Bars Custom Alloy Fuel Cell Wiring, Shifter with Dedenbear shift solenoid, Gauges, MSD 6AL, Chute, Harness, Window Net etc. Wil

Baulkham Hills NSW, Australia
Share
Watch
10
Registered
Holden VZ SS Crewman L76 Gen 1V 6.0 Litre T56 6 Speed Manual 2006 Model Currently 520.8 RWHP ready for a retune to get the 650hp reliable its setup for if you wanted to. ENGINE WORK ProCharger D – 1SC Intercooled Centrifugal Supercharger Siemens / VDO 63lb per hour fuel injectors & custom fuel rail’s & fittings 044 fuel pump , surge tank & regulator , mounted underneath the car Pacemaker 4 into 1 ceramic coated extractors 2.5’ stainless steel twin system & high flow cats & dump tips Crow Cam 21

Hocking WA, Australia
Share
Watch
6
Roll Cage
Log Book
ARC Spec Classic C1 5L V8 Ready to race. Built to do events like SA Rally Heartland and Classic Outback Trials. First Log booked Feb 2021. 5L V8 with VN heads. 600 Holly Street Fighter Carb, Full MSD ignition, SS Extractors and extreme engine mounts. High Torque Starter Motor. T5 Gearbox rebuilt with performance Selectors and Shifter. HD Clutch, VL Turbo rear axel with full spool and 4.4 Diff. Mid 90s Commodore V8 Disc Brakes all round. Hydraulic Handbrake. 60mm Copper Radiator. 55L Fuel Cell w

Boyanup WA, Australia
Share
Watch
10 1
Roll Cage
Log Book
1980 VB Commodore 355 Holden engine with VN heads. Producing 300kw at the rear. CCup sump with accumulator +oil cooler Gforce dogbox recently rebuilt Full floating Borg Warner diff with new axles, centre and drive plates and full spool 330mm rotors front Near new Bilstein dampers Cams registered roll cage with side intrusion bars. (Tarmac rally options) New RPM seat and in date belts Custom electrical system Very light car with plenty of reduction to go. Car weight 1250kg. X2 sets Michelin 18

Ringwood North VIC, Australia
Share
Watch
19
Registered
Roll Cage
Log Book
NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca

Gleneagle QLD, Australia
Share
Watch
9
Roll Cage
**PRICE DROP** 2004 Holden VY Ute Drag Car 468 BB CHEV (selling turn key) Monaro front clip, Steel shell & Alfa glass panels. 9 inch rear with 455 nodular 35 spline spool & Mark Williams axles. Macdonald Bros 4 link rear end with sway bar & strange shockers. Light weight K frame with new struts & Wilwood front brakes and master. Advanced headers customs pipes, BG fuel pump, alloy radiator, MSD power grid ignition. 15x14 Weld racing rears & 15x3 front runners. Weighs 2590 lbs without driver.

Hope Valley SA, Australia
Share
Watch
20
Roll Cage
Was being built to be a 6 second car. Setup for ls engine, powerglide trans, big single turbo(included). FIBREGLASS BONNET, BOOT ALL STEEL WALK OFF FRONT ALL STEEL ROOF, REAR QUARTERS BLACK CONVO PRO'S MCDONALD BROS FRONT END PRO 9 REAR END FULL FLOATER (40 SPLINE BILLET AXLES INC). ALL TIN WORK INCLUDED BIG DOLLARS IN WORK ALRAEDY COMPLETED (HAVE RECEIPTS). CONTACT FOR MORE INFORMATION.

McLaren Flat SA, Australia
Share
Watch
20
Log Book
1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.

Mudgeeraba QLD, Australia
Share
Watch
10
Ve commodore race car. Cage built to national standards and cams approved with all relevant certification,tilton pedal box,fuel safe fuel cell,completely resprayed inside and out including engine bay and inside boot in debeer 2k. Vehicle IS NOT A REPAIRABLE WRITE OFF and has had no body damage at all. Would be an excellent start for someone wanting quality race car. All cams work carried out by Garage 1 here in Victoria.

Kilmore VIC, Australia
Share
Watch