69 items for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
Featured ads
All Results
14
BMW 130i 3e Production Car - For Sale or Hire Here’s your chance to own the 2023 Australian Class C (APC) Championship wining car. Extremely reliable well sorted and put together package that is still capable of podiums at the highest level of production car racing. This little BMW had a full refresh at the start of 2024 for the Bathurst 6hr and is ready to go for the new owner just add fuel and go. New CSF Radiator New clutch New water pump New Alternator / belts New leads and plugs New
51
Registered
Towards the end of the F80 series M3, BMW had really got the formula right. Over 5 years of continual development and several iterations, each successive addition just tweaked and refined what was already a fine drivers car into something of a fine drivers weapon. The Competition was an immediate success and what most thought would be the pinnacle....and then the CS was announced. Taking everything from the Competition, the car was again refined and turned up and culminated in the car we presen
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
6
Ideal start for your track project. The BMW is in very good condition rust and damage free. It needs an engine rebuild with suspected rod bearing damage. Rebuild it or engine swap. Car is in Newcastle and whilst it runs it will need to be towed.
8
Roll CageLog Book
S3 RX7 Rally car, fresh rebuild with only two events since completion. (2022 Alpine, 2023 Southern Cassic) 13B Bridge port with 48IDA, approx 250hp ATWs, stainless extractors, remote oil filter, new PWR oil coiler with new oil lines RX8 close ratio gearbox S3 4.89 LSD with strengthened housing MCA with remote canisters, two events old S4 steering, struts and 4 pot calipers All new wiring loom Twin carter fuel pumps Braided fuel and brakes through out Pedal box with Willwood cylinders Hydraulic h
72
Registered
The best sports saloon....ever Commencing production in 2021 and listing a raft of improvements over the already astonishingly capable M5 Competition, the M5 CS fast became THE ultimate M-Car and global production sold out instantly. Every single one of the only 20 allocated to Australia was snapped up as soon as BMW confirmed availability in our market. Fortunately the car lived up to the hype with the CS being even that much better than the Competition on which it was further honed and revise
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
7
Roll CageLog Book
IPRAVIC number 58 logged booked race car fitted with g13g Ivan Tighe 1044 cams efi hardware throttle bodies haltech elite 550 honda d16 pistons modified close ratio gearbox with locked diff 6x14 wheels and spare set with Yokokhama A050 tyres 2 15x6.5 with tyres some spare panels could covert to 2lt sports sedan ,race weight with 75 kg driver 780 kgs 108 hp at wheels race fuels 102 .2015 IPRAvic under 2lt club champion
10
Log booked 3E production car. 2006 Suzuki Swift Sport 3E production car with log book. Great basis for further development or race as it is. - National spec 6 point weld in roll cage (MA approved). - adjustable coil over shocks / springs. - 2 1/4 inch exhaust system, headers and AES race muffler. - Custom air intake with pod filter. - Slotted front disc brakes and custom brake ducts. - sparco race seat with 4 point harness. - limited slip differential. - Battery relocated from engine bay to pa
15
Race/Track 1995 BMW M3 3.0 E36 Professionally built in the UK Built from a bare shell with a full Custom Cage and painted throughout, no expense has been spared, every ball joint/bush/bearing has been replaced. Fully rebuilt Engine, ACL race bearings, OEM gaskets, OEM Evo oil pump/sump, new starter motor/alternator. 3.91 4plate diff built by JC Racing, 5 speed G/box, Nitron R3's (fully rebuilt Jan 23), Helix paddle clutch, Custom wiring loom and fuse box (complete new loom, not a chopped!),
10 1
Roll CageLog Book
SUZUKI Cappuccino 1993 fitted with full house Swift GTI 1300cc motor, Sierra / Jimny hybrid 5 speed trans, Subaru R160 diff with Kaaz mech LSD Currently set up as a track car. Not roadworthy and cannot be registered without full engineering certificate. Has Grey import compliance plate. Some video in action https://www.youtube.com/watch?v=nml_GdRnq_g https://www.youtube.com/watch?v=qhkl-r2dSXI Price is negotiable Contact Jeremy for further detail
16
Registered
Hi, for sale is my EK1 Civic with EK4 facelift. I don't particularly want to sell it, but having 3 projects cars and renovations on the go at the same time something has to give. Pros: - Overall it's a great little car and has been modified to be either a fun street car or to be competitive on the track. - Has all the fruit you could want. Everything is done, just get in and drive. - Qualifies for Vic historic registration next year. - Engine is registered to the chassis. Cons: - It's a 25 ye
79
Registered
Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original
227 1
Registered
When you think of iconic Japanese cars from the seventies, a number of makes and models immediately spring to mind. But if you had to nominate just one car that best represented design cues, styling and engineering from the era, it would have to be the Mazda RX-3 Coupe. When it was released here in 1972, the rotary-powered coupe was a legend-in-waiting and without question the car has well and truly achieved cult status amongst the Australian automotive community. This particular example has
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
10
Unfinished BMW 2 Door Coupe sports sedan project Rocket Bunny Wide Body Kit fitted Ebay Coil overs New Rear adjustable camber arms ( Not Fitted) Hillside Motor sport Chassis Reinforcement kit front and rear Big Lock steering kit Hydraulic hand brake ( Not fitted) LS Engine plate and T56 gearbox mounts fitted ready for motor and gearbox NO MOTOR OR GEARBOX WITH SALE New 38 Litre Fuel cell and surge tank fitted Sound deadening removed Headlights and tail lights in box supplied with car Still have
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
9
RegisteredRoll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo