33 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
31
Roll CageLog Book
This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash CAMS approved/ complied roll cage Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manua
7
Roll CageLog Book
HRT VZ Clubsport #37/50 50,000kms set up as a targa car, MA log booked 1 event since being built in 2018 (targa great barrier reef) car has been in storage since Harrop brake package 14.5" front 14" rear rotors harrop diff cover AGI Bolt in rollcage Velo seats and harnesses Rally safe wiring in car Spax suspension set up by Greg Nolan at suspension concepts Mafless tuned with extractors and cold air intake Koya Wheels x6 All interior, wheels and standard suspension out of car is in storage
7
Roll CageLog Book
IPRAVIC number 58 logged booked race car fitted with g13g Ivan Tighe 1044 cams efi hardware throttle bodies haltech elite 550 honda d16 pistons modified close ratio gearbox with locked diff 6x14 wheels and spare set with Yokokhama A050 tyres 2 15x6.5 with tyres some spare panels could covert to 2lt sports sedan ,race weight with 75 kg driver 780 kgs 108 hp at wheels race fuels 102 .2015 IPRAvic under 2lt club champion
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
10
Log booked 3E production car. 2006 Suzuki Swift Sport 3E production car with log book. Great basis for further development or race as it is. - National spec 6 point weld in roll cage (MA approved). - adjustable coil over shocks / springs. - 2 1/4 inch exhaust system, headers and AES race muffler. - Custom air intake with pod filter. - Slotted front disc brakes and custom brake ducts. - sparco race seat with 4 point harness. - limited slip differential. - Battery relocated from engine bay to pa
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $9900
10 1
Roll CageLog Book
SUZUKI Cappuccino 1993 fitted with full house Swift GTI 1300cc motor, Sierra / Jimny hybrid 5 speed trans, Subaru R160 diff with Kaaz mech LSD Currently set up as a track car. Not roadworthy and cannot be registered without full engineering certificate. Has Grey import compliance plate. Some video in action https://www.youtube.com/watch?v=nml_GdRnq_g https://www.youtube.com/watch?v=qhkl-r2dSXI Price is negotiable Contact Jeremy for further detail
5 1
Roll Cage
Honda EG civic hatch race car, Built towards time attack and circuit races. Currently the fastest FWD car in W.A - Barbagallo raceway (58sec) and Collie raceway (1.11sec) with plenty more in it. Sleeved and built k24 motor making 580hp (only ran for 4 events and just had a check over with new fluids) Quaife Sequential gearbox (new) Elite racing baffled sump KAZZ 1.5 way diff DBW throttle setup traction control launch control MCA Red coilovers with custom spring rates with spare springs, New S
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to
10 1
Roll Cage
For Sale - Price reduced and is negotiable - Production Sports Car MX5 NB8A track day special. This naturally aspirated 1.8L DOHC engine has never let me down. This car was built by Automotive Plus, and due to its unique sound down the straight has been a head turner at SE Qld race tracks An extensive list of items are below: BC BR Coil overs - adjustable dampers, adjustable ride height BBS RG359 RG-F Wheels, 15x7 wrapped in Hancook Ventus C51, medium compound twin groove slicks. 205/50Z
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
8
Roll CageLog Book
Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged
4
Roll CageLog Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin
9
Roll CageLog Book
Honda Integra Coupe 1998 model, blue, excellent condition, ready to go: - Honda B18C engine with vitec recently installed after complete rebuild ( invoices to show), extractors, stainless steel exhaust, Dyno by Micks Motorsport. - Motorsport Australia (formerly CAMS) national log book set up for 3J class including Improved Production. - coil overs suspension. - AGL full approved roll cage. - Hard race sway bar. - Late model Honda enlarged brakes. - Locked differential. - Sparco seat/full belts
7
Roll Cage
For Sale, 1999 Nb Mx5. Sprints, Track Days, Hill Climbs, Motokahana, Time Attack Build ready to race. This car was built for doing Sprints and Hill climbs so any form of Track days and so on this car is built ready to go. Due to where we live there is no "close" Track so like all good ideas its just feesable to own up here any more. Our loss is your gain. 1999 NB Mazda Mx5 Short version of the build Supercharged 1.8l 4cyl Haltech Elite 1500 Haltech IC7 Dash Tuned on E85 Bigger Throttle Bo
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s