66 items for sale

Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount

2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc

Great entry level car, reliable quick and cheap to run. National Roll Cage Only V6 2.5 litre Galant / Legnum hologated with CAMS for production cars. LOG booked. Original motor 159kms, turbos HAVEN'T been played with Factory boost level. with Controller. Launch Control BC Adjustable Coil Overs plus top camber adjusters, new brake pads and oil catch can. Timing belt and Hydraulic tension done recently. GTO 4 spot calipers, still have originals 2 spot Loads of extras. 3 sets of rims and semi slic

Ex Mirage Cup Car bought with no prior damage, the car was raced in western australia under IP 1600 rules then converted to under 2ltr with no expense spared. Motor: JE pistons Carrillo rods Rubuilers crank Jun Cams Extensive headwork Dry Sump Butler tuned length extractors ( 10 hours on motor, comp is 250 on all cylinders) Gear box: RallyArt close ratio gearset Albins 5.1 crownwheel pinnion Kaaz 1.5 lsd Quatermaster 5.5 inch twin plate clutch ( 10 hours) Car: Motec m400 Custom ali fuel ta

For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.

Alston Chassis kit built in America Willawood disc brakes all round IHRA teched for 7.99 32/14 x 15 MT 50% Genuine Weld Dragway rims Gunmetal Gray Wrap Full fibreglass front clip Full roll cage 40 spline Mark Williams axels 7AL-3 Headers and big block engine plate Set up for big block chev with 2 speed glide Ran consistent 8.4's with 800 hp mild street motor Runner up Top Sportsman in 2023 Speed Addict NSW Championships

NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh

Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,

Race and round winner in the Sports Sedan Vic State Race Series last time out, Sports Sedan or Improved Production race car , dry sumped 2.2 litre, fresh engine , Modena 5 speed just freshened , 6 pot and 4 pot calipers , supercar rotors , 3 way shocks , new turbo and exhaust , most of the running gear is one meeting old , Philip Island 1.38s Sandown 1.14s Fast car ready to race , multiple sets of wheels , spare drive shafts and other spares , 420 kw on 28 psi , you will not go faster for the

Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,

Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to