94 items for sale

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Reluctant sale but it’s time to move on. Finally concluded I just don’t have the time or energy anymore to go racing. Grandkids have taken over. Built in 98. First raced in 99. Have been upgrading since. Lots of fun in a fast, consistent car. CAMS Log book 3J for Improved Production issued 1998 Mitsubishi 4G54 Engine (bored to 2.8) Dyno’d to 182 RWHP Lightened pistons M6 Head (Ported, Polished and Flow Tested) Twin Weber 45 DCOE Carburettor’s Custom camshaft Custom Intake manifold Custom

This 500HP Midnight Purple 3 R34 is not a car you can just go out and buy in this condition. I recently won this car through a raffle with Vincere Australia, who bought the car off of a woman who did the majority of the modifications. The paintwork, the body kit, the extensive modifications to reach 500HP reliably AND legally, really proves that this car was loved and cared for before I owned it. I have a tracked down a full history of the car in Australia; when it was imported, who owned it,

1973 Brabham bt41 Formula 3 Race Car. 1600cc Novamotor Twin Cam with 45 Twin Side Draught Weber DCOE Carburettors Gearbox: 5 speed Hewland Mk9 (dog box) Transaxial gearbox. Chassis: Aluminum Monochrome with steel tube bulkhead and engine bay with rear selection Tubular Space frame. Bodywork: Fiberglass with front and rear wing aerodynamic aids Comes with CAMS C of D and Logbook. Alberto Colombo campaigned this car in the 1973 Italian F3 Championship with six wins in the 1973 Championship E

Genuine Fully Built FQ360 Only a limited number of these released in the UK market Personal Import from the UK in 2014 55,000 miles (92kms) FQ360 original carbon front and rear lip as well as FQ360 interior in great condition 2lt 5 Speed Manual (Built by Neat Gearboxes) Tomei Cams ARP 625 Head Studs Nitto I Beam Rods Nitto Pistons Upgraded Timing Chain Turbo 1 Manifold Garret 3071R Invidia Exhaust FIC 1350cc Injectors K-Sport Coilovers Twin Plate Extreme Clutch Mishimoto Intercooler Work ZR10 18

Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount

Up for sale is this 2001 Nissan Skyline R34 GTT Coupe Manual in QT1 Pearl White, 144000 kms. This car has a lot of good modifications that would have it as an excellent circuit/track car - I have had it as a street car for the last couple of years and am finding more and more that I do not have the time to drive it nor the time to do the work to it that I would like. Option 1, take it as is at $58,000 and enjoy one hell of a street car - or option 2 have this R34 Skyline converted into a cage

N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

Great entry level car, reliable quick and cheap to run. National Roll Cage Only V6 2.5 litre Galant / Legnum hologated with CAMS for production cars. LOG booked. Original motor 159kms, turbos HAVEN'T been played with Factory boost level. with Controller. Launch Control BC Adjustable Coil Overs plus top camber adjusters, new brake pads and oil catch can. Timing belt and Hydraulic tension done recently. GTO 4 spot calipers, still have originals 2 spot Loads of extras. 3 sets of rims and semi slic

Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford

Negotiable on price feel free to send an offer. Selling my evo x due to life changing and no longer using the car feel free to send a message. Has rego comes with spare parts. Build list in the description Body/Aero: Varis widebody kit Carbon side skirt extensions Carbon front lip Carbon front cooling vent Carbon rear diffuser Carbon cooling plate RS fog light delete kit 3M black roof wrap Window tint VLAND DRL projector LED headlights Morimoto XB55 50w HID ballasts with 6500k (H7) MARS tai

Ex Mirage Cup Car bought with no prior damage, the car was raced in western australia under IP 1600 rules then converted to under 2ltr with no expense spared. Motor: JE pistons Carrillo rods Rubuilers crank Jun Cams Extensive headwork Dry Sump Butler tuned length extractors ( 10 hours on motor, comp is 250 on all cylinders) Gear box: RallyArt close ratio gearset Albins 5.1 crownwheel pinnion Kaaz 1.5 lsd Quatermaster 5.5 inch twin plate clutch ( 10 hours) Car: Motec m400 Custom ali fuel ta

For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.

Hi, for sale is my EK1 Civic with EK4 facelift. I don't particularly want to sell it, but having 3 projects cars and renovations on the go at the same time something has to give. Pros: - Overall it's a great little car and has been modified to be either a fun street car or to be competitive on the track. - Has all the fruit you could want. Everything is done, just get in and drive. - Qualifies for Vic historic registration next year. - Engine is registered to the chassis. Cons: - It's a 25 ye