66 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
10
Registered
2001 gen7 zzt231 celica 6 speed, Trd , rotrex supercharger,front mount intercooler etc. Has engineering cert in tasmania. Looking for a new project ?( i have another project taking my time and energy for now)This car has a blown motor after throwing a rod.Needs new block, 1 x mahl piston and rod,machining.The head/valves and crank seem ok.The motor/ supercharger had 50k on it after complete rebuild.(motor was over revved )after clutch problem. As far as power it was running 275kw atw @ 7psi o
4
Roll CageLog Book
I am selling my collector’s item 1975 Toyota Corolla log booked for Improved Production since 1993. Running a 4 A-GE 1600 small port with forged medium weight rods, hi comp with MAHLE pistons and forged rods, Arp holding it together. The head- cams are TRD formula Atlantic .320 degrees Adjustable gears with shim under bucket valve actuation. Custom quad throttle bodies. Radiator is new. All suspension bushing is new, Oil cooler is new, the sump is winged and gated, Haltech 2500 with pro logic
15
Roll Cage
ST185 GT-4 Wide Body 4wd 3SGTE. Built for Track/Hillclimb/Tarmac. Full cage, Harness and Velo race seat. Forged internals, CP pisons, eagle rods, all balanced, BC 264 cams, BC Titanium retainers and heavy duty valve springs, Turbosmart WG40, Link G4+ ECU, Garrett Turbo, Boost 6 Manifold External Waste Gate, XTG clutchFront Mount Intercooler, Walbro pump etc. External engine oil coolers, remote oil filter......... Conservatively tuned to 275Kw and 678Nm at 17 psi on E85 when it ran out of inje
7
Roll CageLog Book
IPRAVIC number 58 logged booked race car fitted with g13g Ivan Tighe 1044 cams efi hardware throttle bodies haltech elite 550 honda d16 pistons modified close ratio gearbox with locked diff 6x14 wheels and spare set with Yokokhama A050 tyres 2 15x6.5 with tyres some spare panels could covert to 2lt sports sedan ,race weight with 75 kg driver 760 kgs 108 hp at wheels race fuels 102
5
Roll CageLog Book
1984 Toyota AE86 Sprinter, Motorsport Australia Logbook. 4AG 1600 twin cam with 4-2-1 extractors. T50 5 spd manual transmission. New Exedy OEM clutch. Timing belt, tensioner, water pump, crank and cam seals replaced June 2019. Cusco strut brace. Aero bonnet latches, Front Tow hook, Rhino Alarm & Immobilser 6 point Motorsport Austrlia approved roll cage. Cobra Monaco Pro driving seat on RPM seat side mounts. Ecliptech SHIFT-i shift lights. Mains battery power shutoff switch. 4.3 LSD.
9
RegisteredRoll Cage
Toyota MR2 SW20 built for track days and road use. Car is in great condition. Engine 5SGTE 2.2l stroker crank Aeroflow turbo Custom exhaust Custom air cleaner and intercooler Haltech engine management Runs E85 and flex tuned 380Hp at wheels( its fast...) Gearbox, 5 speed with locked diff. Custom alloy radiator/thermos fans Custom engine compartment extractor fans Power steering, power windows no aircon. Race seats and harness plus standard seat belts fitted. Roll cage Mod plated for qld. Afte
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
36
Registered
2020 Chevrolet Camaro ZL1 Coupe 10Spd Auto 6.2SC LT4 - 1 Owner - Build #0038 - ONLY 830klms from new - Highly Collectable HSV - Totally Original We are proud to offer to you this great opportunity in securing this highly collectable never to be repeated ''build'' #0038 Camaro ZL1, one of the first delivery Camaro ZL1's for the public allocation of 375 Camaros made for the Australian market through Walkinshaw Performance who made the ADR/conversions for the local market. This stunning and truly
40
Roll Cage
2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh
10
Log booked 3E production car. 2006 Suzuki Swift Sport 3E production car with log book. Great basis for further development or race as it is. - National spec 6 point weld in roll cage (MA approved). - adjustable coil over shocks / springs. - 2 1/4 inch exhaust system, headers and AES race muffler. - Custom air intake with pod filter. - Slotted front disc brakes and custom brake ducts. - sparco race seat with 4 point harness. - limited slip differential. - Battery relocated from engine bay to pa
13
New AR styled fibreglass body on Panoz frame. Panoz frame assembled by Penske Racing to incredibly high standards. This car is powered by an LS1 Chevrolet motor Z06 243 with Tilton triple disc clutch assembly. Included are General Motors performance parts, ASA CAM, rods and lifters. Penske shocks all round with TSW wheels and Hoosier slicks. Wiring harness is new with modified PCM, ATL fuel cell with black box surge pump. Car includes many spares: 4 new wheels with Hoosier slicks 2 Continental s
10
Roll CageLog Book
A podium winning car in the 2023 TGRA 86 national series, this Toyota 86 is precision-engineered by Neal Bates Motorsport and fully compliant with the 2024 Toyota 86 scholarship series. It showcases a commitment to thorough preparation, from a complete overhaul of control arms, rear subframe, and bushings to an exhaustive refinement of its electrical systems. Prepared meticulously for the ’23 season, this vehicle promises performance and reliability. Inclusions: 2015 Toyota 86 TGRA Race Car in
10 1
Roll CageLog Book
SUZUKI Cappuccino 1993 fitted with full house Swift GTI 1300cc motor, Sierra / Jimny hybrid 5 speed trans, Subaru R160 diff with Kaaz mech LSD Currently set up as a track car. Not roadworthy and cannot be registered without full engineering certificate. Has Grey import compliance plate. Some video in action https://www.youtube.com/watch?v=nml_GdRnq_g https://www.youtube.com/watch?v=qhkl-r2dSXI Price is negotiable Contact Jeremy for further detail
5 1
Roll Cage
Honda EG civic hatch race car, Built towards time attack and circuit races. Currently the fastest FWD car in W.A - Barbagallo raceway (58sec) and Collie raceway (1.11sec) with plenty more in it. Sleeved and built k24 motor making 580hp (only ran for 4 events and just had a check over with new fluids) Quaife Sequential gearbox (new) Elite racing baffled sump KAZZ 1.5 way diff DBW throttle setup traction control launch control MCA Red coilovers with custom spring rates with spare springs, New S
10
New Stock Alert - SOLD AS A TRACK CAR ONLY!! $29,990 for the complete minus the front seats! PLEASE NOTE, THIS VEHICLE CANNOT BE ROAD REGISTERED!!!! All Parts Tested come with Full Guarantee & Warranty 2020 Toyota Yaris GR 41,XXXKMS 6SP Transmission AWD (Driveline components inspected ) GR Yaris OEM Wheels 3cyl Turbo Car starts, runs and drives! This GR Yaris previously had some damage, which has since been professionally repaired at our expense! So all you need to do is jump
16
Registered
Hi, for sale is my EK1 Civic with EK4 facelift. I don't particularly want to sell it, but having 3 projects cars and renovations on the go at the same time something has to give. Pros: - Overall it's a great little car and has been modified to be either a fun street car or to be competitive on the track. - Has all the fruit you could want. Everything is done, just get in and drive. - Qualifies for Vic historic registration next year. - Engine is registered to the chassis. Cons: - It's a 25 ye
9
Roll Cage
For Sale | Toyota AE86 -Ready for time attack but can be used for drift or circuit racing -Immaculate build and maintained to the highest standard Please contact me for more information https://www.speedhunters.com/2018/11/the-ultimate-drift-transition-in-an-ae86/toyota-ae86-beau-yates-blakejones-speedhunters/
15
RegisteredRoll Cage
Amazing 1.9ltr DC2 - Motec M1, Dart block, Golden Eagle crank and Rods, Wiseco pistons. Built for boost... and to be a reliable track engine.. currently turned NA.. Toda headers.. Built by JHH - see image of JHH stamped engine. All Ferrea heads components , over sized valves, 1000cc Injection Dynamic injectors ATS Carbon clutch ATS LSD Skunk cams Spoon brakes Tein Super racing coil overs, with external reservoirs Cusco sway bars All bushes changed with Hard Race bushes. Unfortunately only s
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
8
Roll Cage
Genuine Michael Waltrip Racing Toyota Camry chassis driven by Marcos Ambrose in 2010, including the infamous Sonoma race where he couldn’t re-start the car while saving fuel in the lead. Sold as-is (chassis on castors), and comes with genuine NASCAR wheels with brand new tyres, diff housing and seat.