39 items between $10,000 & $20,000 for sale
Most Recent
Most Recent
All Results
2
2016 Tickford Racing Super Black Racing Ice Break Bonnet (unsigned) Ford Falcon FGX Supercar driven by Chris Pither Event: Coates Hire Sydney 500 Track: Homebush Street Circuit (Last Event) Price negotiable for serious buyers will consider all offers best offer will be taken onboard Freight available within Australia
5
Used 2wd Dynocom dyno with PC, 2 ramps (Not pictured) and hand controller. Was purchased from a workshop in QLD however has remained uninstalled in current location due to noise restrictions not allowing its use in the current workshop. Pickup preferred but if transport required please contact to discuss.
9
SX02 SimworX Chassis system¬ (2016 chassis #398) Triple 27" LED Screens SimworX Race Seat Motec style digital data dash SimworX Pro Series GT V3.1 Racing Pedals Fanatec Clubsport wheelbase V2.5 Fanatec Clubsport Suede steering wheel SimworX Pro Series Sequential Shifter Dedicated Audio Amplifier fitted integral with the chassis Sub Woofer built in to Chassis Surround sound speakers PC (new PC installed August 2021) Scorptec Esports RTX 3070 Gaming PC Intel Core i7 11700K
7 1
The engine is complete with the intake and throttle bodies and Terminator X ECU and harness and it includes the holley ign module that runs the coils from the Terminator software. BBC Street or Race Engine 'NEW' up dated video !!!!!!!!!!!!!!!! Go To This Video to hear it run https://youtu.be/GmDJW1GD5hs LS 7 4bolt Block bored to 4.280 460ci GM 4.0 Stroke Steel crank LS 7 Rods with 7/16 rod bolts Dome Forged pistons 1/16,1/16,3/16 rings with heat coatings on pistons Comp Cams Hyd Rolle
23
EX WGR SUPER V8 2001 RACE MOTOR BLOCK BRONZE LIFTER BUSHES NEW JE 4.030 PISTONS,RINGS'PINS,ROLLER LIFTERS,CAM,JESEL CAM BELTS PULLIES,4XBOLT MAIN CAPS,NEW DRYSUMP,FITTINGS,HOSE,PUMP,FLYWHEEL,BALANCER,JESEL ROCKERS,NEW LP MANIFOLD,PUSH RODS HEADS ARE BEAR BUT HAS NEW VALVES ONLYROCKER COVERS,DIZY,WATER PUMP,NEW BIGEND AND MAIN BEARINGS, THIS IS A ALL SUPER V8 PARTS ENGINE. VERY LITTLE PARTS NEEDED TO COMPLETE. ALSO HAVE 2 NASCAR SBC BILLET 350 CRANKS $1,000 EACH AND HOLDEN 308 BILLET
1
" DAKAR " Personalised Number Plate Qld May swap. Would consider American pick up or race car.
13
We are offering for sale various spare parts to suit Audi R8 LMS MY16-18 including some body panels, Ohlins TTX36 damper set, various spring sets, 2 x pairs of restrictors 38 & 39mm, 1 x pair open throttle body adaptors, 1 set of high stands, 2 x new Krontec LL24 air jacks, various control arms, camber shim sets, clutches and release bearing, Hoer Gearbox housing. Contact me for further information and pricing on parts or make an offer for the lot.
9
Not sold 100% GENUINE BATHURST RACED ENGINE 1973 block COMPLETE WITH 308 STD BORE BLOCK MINT CON L34 X BLOCK 308 MINT L34 CRANKSHAFT STD GRIND L34 X RODS WILL COME WITH NEW ARP LARGE ROD BOLTS L34 REPCO BATHURST RACE STD PISTONS WITH NEW RINGS L34 BATHURST HEADS WITH NEW SET SPARE VALVES L34 MANIFOLD L34 FLYWHEEL NEW CAM WITH SOLID LIFTERS AND CAM GEAR TO ME THIS IS A VERY RELUCTANT SALE PLEASE NOTE NO NO TIME WASTERS WILL ONLY ANSWER TO CALLS TO MY PHONE ALL ITEMS ARE GENUINE
4
RCE Performance Warehouse are offering a great opportunity to the right applicant a position to join our sales team!! www.rceperformance.com.au Hours for job position M-F 8am to 5pm. Stable business that has been established with current owner for over 20 years. Remuneration based on abilities. Email resume to racecarengineering@bigpond.com Please put the word "resume" in the subject line. #rceperformance #rcejob #performancepartsposition #willowbankraceway
5
New LS2 Crate engine 6.0 Litre ( Brand new never started ) Higgins Cylinder Heads (CNC Ported, with stainless steel valves) Crow roller Cam and Crow Lifters with L7 lifter buckets Trunion upgraded kit Double row Timing chain Alloy dry sump pan (Savy) AFI dry sump balancer Stainless steel header pipes At extra cost can supply: LHS starter motor kit Dry sump pump kit including brackets
4
RPS Carbon race brakes, 2x sets of 380mm front discs and 1x set of 356mm discs and pads, comes with hats, I purchased these to run on my V8 Supercar and then my racing series banned the used of Carbon brakes, hence these are no longer of use to me, we did around 10 laps of initial testing and one set of front discs is still brand new. These weigh roughly half of what the steel brakes we run do. Selling for half of my purchase price. Contact Nick +64275536300 or email nick@chesters.co.nz
1
Small block Chev Engine up for sale $17,000 may be willing to seperate Consistent 8 sec motor Racer Pro 23 degree aluminium heads T&D rockers Dart little M block 4.125: bore Scat forged crank 3.875” stroke Scat 6.000” H-beam rods Ross forged pistons Comp Cams solid roller Crower severe duty lifters Trend moly pushrods Moroso steel oil pan Moroso oil pump Meziere electric water pump MSD billet distributor, MSD 6AL, MSD Pro power coil, MSD leads System 1 oil filter Edelbrock Victor ram intake En
7
533 cube BBC Blower Motor. New engine never been started. Manifold to sump Chev block 4 bolt mains,Howards main caps,grout filled.Ohio crankshaft 4340 BBC,Crank hub and bearing support,Bullet custom grind cam (326/336-R1/4 S/NO 91264),Crower Rocker Assembly (1.7 Intake 1.7 Exhaust).Crower sever duty cutaway .903 rollers,Bill Miller Pistons 494 Solid Dome (Bore 4.6050,Comp Height 1.250,Fly cut)Bill Miller Alloy Rods,Moroso Oil Pan,Ported Heads and matching manifold.Miloden gear drive.Sumner bros
10
HMS V8 Supercar short motor. Motor has some new and used parts including new set of JE pistons, some new bearings. Includes a set of rods, crank and cam and other parts as shown in photos. Price is negotiable. Any questions please message.
14
ECO-BOOST 2.3T MUSTANG 2017 with under 15K on speedo. comes with 6 speed manual for vehicle conversion or hotrod. MISHIMOTO intercooler with pipe clamps and alloy radiator with fans. Assorted intercooler pipes and hoses . TURBOSMART blow off vale . STD ending and gearbox mounts. home made reverse lockout shifter . AUTOMETER tech adapter with Mustang computer and box of vehicle wiring if needed. Mustang fuel tank. Mustang accelerator pedal and clutch pedal. Mustang switches and dash clu
14
Nissan 370Z rolling shell, custom Roll cage with side intrusion, air jacks mounts, billet steering Coolum, front nudge bar, lift off doors, rear separation wall, the fabrication so far has been over 16k without the pedal box and airjacks, and velo seats. I have the standard hatch and bonnet and guards but no lights. Car was imported with flood damage originally so not in a accident and written off, it’s a straight clean shell. I’ve lost interest so my lose will be someone else’s gain
2
Arrive and drive now available for the 2022 Bathurst 6hr Experienced professional team Class C Car and New Class B car available Suitable licence, experience and budget required Please email application and driving resume to chris@primemotorsport.com.au
2
G force gf 2000 McLeod clutch and billet Steel flywheel Ser5 bellhousing Ihra approved steel shield Starter motor right hand drive shifter Gearbox crossmember Mark Williams Tail shaft yolk complete set up from Pac performance rx3 13b dentist has run 7.0 all in perfect working order ready to use $12000
6
One of the best ap racing kits available from ap racing. 6 piston front 4 piston rear 380x40 355x32 30mm racing pads front 30mm racing pads rear Ap racing t-bobbin kit The ultimate kit, matching upside-down ap insignia, custom ordered from ap racing. Also possible to run a 380mm carbon disc all round or even iron. Over $60,000 worth of brake kit No time wasters thanks. International shipping available.