175 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
14
Roll CageLog Book
This is a unique piece of V8 Supercar and Dick Johnson Racing history and has only had two owners after its time at DJR. Originally built as an AU model Ford Falcon V8 Supercar, this car (chassis DJR AU12) was converted to BA bodywork by DJR and became a part of the Bowden Collection of cars before being purchased by its current Queensland-based owner in 2014. Raced by Paul Radisich in Shell Helix colours for DJR as the #18 Falcon during the 2001 (winner of the Perth round of the championship)
2
This is one of the diffs out of my VL commodore race car. It's got a pair of custom brackets to suit VS front calipers and the shock mounts have been cut off as well aa the car that it was in ran a rose jointed panhard bar with adjustable roll centre sonif you were going to use this housing it will require a bit of fab for your application. It's an M75/78 with 3.89 gears an a full 31 spline spool. Im great condition.
9
Roll CageLog Book
MA logbook KV6 Engine Piper 270 cams Motec M130 ECU Janespeed full race exhaust 2 thermo fans new radiator Modified air box VIS system removed MA approved roll cage Willwood front brakes 5 speed close ratio gearbox with new short shifter Quaife atb LSD with 4:1 ratio with new steel bearings Lightened and balanced flywheel 2 sets of wheels with 215/45/17 Yokohama Advan AO50 and 215/40/17 Nankang AR1 tyres fitted New Sparco removable steering wheel AVO adjustable shocks all around with Eibach
5
A Carbon Fiber rear three element wing for Hillclimb Time Attack cars. This wing has never been fitted to a car and is as new. I imported the wing from the UK at a cost of 5000GBP. The elements have hard points engineered into the structure for mounting and support. Main Element Length is 1720mm and cord is 300mm. Second element is 1720mm x 120mm and third element is 1720mm x 115mm. Each element can be adjusted or removed.
5
Xtrac 545 sequetial gearbox. Fully rebuilt. Xtrac gear lever included. Used with BMW M3 GTR and BMW Z4 GT3. Comes with spare ratios and input shaft. Adaptating plate for BMW S14/S38/M88 bellhousing. BMW e36/e46 central tunnel modified for better gear lever manipulation
11 1
Roll CageLog Book
Subaru WRX Race Car MY04 Java Black Pearl Race/Track/Tarmac rally EJ20 re-built with STI heads + Cams Race pistons + rods, and bearings (by STI Docklands) Custom built ATP High Flowed VF34 Turbo with upgrade MFS Billet CW STI ECU tuned by RE Motorsports AVO pod filter and Cold air induction Custom intercooler spray system New 5 speed gearbox installed April 2024. ADS Level 4 - Hybrid Spec 3 Exedy Racing Sports Organic Clutch Kit AP Racing brakes (front). Plenty on pads (Ferodo DS3000) Rear diff
8
Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.
6
NO INTERNALS - This is a set of 3.2 engine cases with cylinders, heads and cam towers. What is shown in the photos. - 930/21 engine case, aluminium 5R and 6R with stamped matching case halves. - 930.104.325.4R Cylinder heads - 930.105.111. 2R Cam towers Note: Ex race car engine which is blank where the engine number would be. Would suit race build or would have to be re-birthed to use on the road. Also have internals if interested.
9
Car has been built for track days. Engine built by Top Torque to make around 220kw atw. Ej20 Engine with forged pistons, H beam rods, Arp head studs and MLS-R head gaskets. All bottom end bearings are race series. Apexi power FC. Dyno tuned by Rev Zone with a safe 160kw atw on 18psi. Full turbo back mandrel bend exhaust. Arc intercooler STI Front seats STI Front strut brace STI alloy control arms Whiteline sway bars and end links Whiteline anti lift kit Whiteline strut tops Adjustable shocks
20 1
Roll CageLog Book
Winner of 2022 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded - 3 of 4 rounds contested for 7 Class wins, 3 Round wins, 3 Outright race wins. Two wins (including one fastest lap) and 2 second placings in Round 1 of 2023 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded. Then competed in 2 rounds of 2023 Victorian Sports Sedans Championship for something different and to race at Phillip Island. Quick car that sounds great ! Motorsport Australia & AASA L
4
Porsche 992 Cup Car purchased new in 2023 for the 2023 Australian Carrera Cup Season run and maintained by PCM, 3 sets of wheels, travel nuts, safety stands, and car cover, original car NO RESHELL, good clean original car, 5458klm with 35 engine hours. $395,000 + gst.
3
This is a 1970's flat track bike with an OSSA Stilleto TT engine (also refereed to as a Dick Mann TT engine), these motors were produced for American Junior Class Flat Track with around 36 hp, I have had this bike for many years, unfortunately at 70 something I am not brave enought to race this rocket. I was told by the person who sold me the bike that the frame was a copy of an Alstar, but I cannot confirm this. Some years ago I removed the front brake and changed the rear manual disc caliper w
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65
4
350 Fuel Injected Chev Engine, built as a project, only dyno time. Never installed to a car. 600BHP @7000. Autronic ECU & Harness, Miloden wet sump . SHP Dart 4 Bolt Block. Crower Crank. New parts include, NC'd Brodix Heads (1188106), stainless valves, Jessel Shaft Rockers, Brodix manifold (HV1814), CP Pistons & pins, Oliver 6" Rods, Isky roller cam 294: 302: 108. MSD dual Ignition 9:1 Comp ratio, tuned & mapped on 98 unleaded fuel. Very smooth & progressive. Ready to install. Ideal f
20
Roll Cage
Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount
14
Improved production 3J 6cyl, falcon, logbook, has run in vic state series last 2 years, fully sorted car. Doing 2:02 at the island and 1:31 at Sandown, will come with a Windsor, kframe, Bellhousing, ecu and wiring harness plus heaps of spare panels and parts. Located Russell’s bridge vic
7
8.2 Deck height Bought as spare but never used Suitable for turbocharging or supercharging It takes a Cleveland crankshaft and Cleveland camshaft Comes with front timing cover
18
Roll CageLog Book
This is a highly sought-after two-litre Super Touring car from the celebrated era of British Touring Car Championship racing. A 1997-build car constructed and run by MSD (Motor Sport Developments) in that year’s BTCC and driven by British ace Patrick Watts in its distinctive Esso Ultron green and gold livery. Currently located in Adelaide, South Australia, chassis PR003 is one of only three 406 Super Tourers cars built for the 1997 BTCC season and later raced in Australia in the BOC Gases Aust
2
Roll Cage
Excel race car. 4 door, Be Different. Full AGI cage with footwell protection, MCA suspension, race exhaust, short shifter, floor tray. 15x7 wheels 2 sets of wheels and new set of federals. Great car to start in and develop as you go along or perfect for budget enduros etc.