101 Motorsport Vehicles for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
14
Roll CageLog Book
This is a unique piece of V8 Supercar and Dick Johnson Racing history and has only had two owners after its time at DJR. Originally built as an AU model Ford Falcon V8 Supercar, this car (chassis DJR AU12) was converted to BA bodywork by DJR and became a part of the Bowden Collection of cars before being purchased by its current Queensland-based owner in 2014. Raced by Paul Radisich in Shell Helix colours for DJR as the #18 Falcon during the 2001 (winner of the Perth round of the championship)
9
Roll CageLog Book
MA logbook KV6 Engine Piper 270 cams Motec M130 ECU Janespeed full race exhaust 2 thermo fans new radiator Modified air box VIS system removed MA approved roll cage Willwood front brakes 5 speed close ratio gearbox with new short shifter Quaife atb LSD with 4:1 ratio with new steel bearings Lightened and balanced flywheel 2 sets of wheels with 215/45/17 Yokohama Advan AO50 and 215/40/17 Nankang AR1 tyres fitted New Sparco removable steering wheel AVO adjustable shocks all around with Eibach
11 1
Roll CageLog Book
Subaru WRX Race Car MY04 Java Black Pearl Race/Track/Tarmac rally EJ20 re-built with STI heads + Cams Race pistons + rods, and bearings (by STI Docklands) Custom built ATP High Flowed VF34 Turbo with upgrade MFS Billet CW STI ECU tuned by RE Motorsports AVO pod filter and Cold air induction Custom intercooler spray system New 5 speed gearbox installed April 2024. ADS Level 4 - Hybrid Spec 3 Exedy Racing Sports Organic Clutch Kit AP Racing brakes (front). Plenty on pads (Ferodo DS3000) Rear diff
8
Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.
9
Car has been built for track days. Engine built by Top Torque to make around 220kw atw. Ej20 Engine with forged pistons, H beam rods, Arp head studs and MLS-R head gaskets. All bottom end bearings are race series. Apexi power FC. Dyno tuned by Rev Zone with a safe 160kw atw on 18psi. Full turbo back mandrel bend exhaust. Arc intercooler STI Front seats STI Front strut brace STI alloy control arms Whiteline sway bars and end links Whiteline anti lift kit Whiteline strut tops Adjustable shocks
32
Roll Cage
Daihatsu Charade 1986 G11 Turbo originally a turbo car ! CB80 T conversion - twin cam fresh rebuild inc. forged Pistons - new water pump - belt and gaskets Good paint - exterior Half Cage fuel cell in boot willwood brake conversion _ not complete spare near complete engine spare - donor car Will need completing sold as project - unfinished project car REQUIRES wiring - either standard ECU (supplied) haltech and loom $2000 extra brakes - need plumbing and finishing off turbo - eith
40
Roll Cage
2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh
42
Roll Cage
Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh
20 1
Roll CageLog Book
Winner of 2022 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded - 3 of 4 rounds contested for 7 Class wins, 3 Round wins, 3 Outright race wins. Two wins (including one fastest lap) and 2 second placings in Round 1 of 2023 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded. Then competed in 2 rounds of 2023 Victorian Sports Sedans Championship for something different and to race at Phillip Island. Quick car that sounds great ! Motorsport Australia & AASA L
4
Porsche 992 Cup Car purchased new in 2023 for the 2023 Australian Carrera Cup Season run and maintained by PCM, 3 sets of wheels, travel nuts, safety stands, and car cover, original car NO RESHELL, good clean original car, 5458klm with 35 engine hours. $395,000 + gst.
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65
20
2013 Renault Megane RS265 6 Speed 2lt Turbo Brilliant drivers car - Ran faultlessly in every stage of Adelaide Rally All maintenance up to date, including timing belt, clutch and brakes having very recently been taken care of. Non Caged - has been returned to stock trim except steering wheel and shifter (Have Velo GP1 Drivers Seat if needed) Full 3" exhaust ITG Intake SMF Clutch conversion Eibach springs Enkei 18" wheels with AR1 tyres DBA rotors with Intima SR pads RS tuned Velo aftermark
20
Roll Cage
Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount
14
Improved production 3J 6cyl, falcon, logbook, has run in vic state series last 2 years, fully sorted car. Doing 2:02 at the island and 1:31 at Sandown, will come with a Windsor, kframe, Bellhousing, ecu and wiring harness plus heaps of spare panels and parts. Located Russell’s bridge vic
18
Roll CageLog Book
This is a highly sought-after two-litre Super Touring car from the celebrated era of British Touring Car Championship racing. A 1997-build car constructed and run by MSD (Motor Sport Developments) in that year’s BTCC and driven by British ace Patrick Watts in its distinctive Esso Ultron green and gold livery. Currently located in Adelaide, South Australia, chassis PR003 is one of only three 406 Super Tourers cars built for the 1997 BTCC season and later raced in Australia in the BOC Gases Aust
2
Roll Cage
Excel race car. 4 door, Be Different. Full AGI cage with footwell protection, MCA suspension, race exhaust, short shifter, floor tray. 15x7 wheels 2 sets of wheels and new set of federals. Great car to start in and develop as you go along or perfect for budget enduros etc.
20 1
Roll CageLog Book
This RS is a CAMS log booked ex-Targa Rally car and mod plated for all modifications in the car shoudl you want to register it for the road (half cage mod plate, front legs need to come out for roadworthy to re-register, easy bolt in job). Details: - 22,000 kms - Head Gasket recall done at Ford - Velo driver and passenger seat with Velo 6 point harnesses all in date - AGI National Rally Spec Roll Cage (CAMS certified) - MCA Custom Red Series Coilovers with multiple spring rates supplied with th
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.
7
Roll CageLog Book
IPRAVIC number 58 logged booked race car fitted with g13g Ivan Tighe 1044 cams efi hardware throttle bodies haltech elite 550 honda d16 pistons modified close ratio gearbox with locked diff 6x14 wheels and spare set with Yokokhama A050 tyres 2 15x6.5 with tyres some spare panels could covert to 2lt sports sedan ,race weight with 75 kg driver 760 kgs 108 hp at wheels race fuels 102