228 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
NO INTERNALS - This is a set of 3.2 engine cases with cylinders, heads and cam towers. What is shown in the photos. - 930/21 engine case, aluminium 5R and 6R with stamped matching case halves. - 930.104.325.4R Cylinder heads - 930.105.111. 2R Cam towers Note: Ex race car engine which is blank where the engine number would be. Would suit race build or would have to be re-birthed to use on the road. Also have internals if interested.
3
I have 19 available $40 each which is less the half price can post Australia wide
2
Porsche 996 997 Centre lock wheel travel nuts Can post Australia wide for $20
8
Sr20de fully rebuilt. Custom made pistons for 14:1 compression, h beam rods, big crow cams, golbys adjustable cam gears, gtir intake manifold. Block was cleaned, decked and machined. Crank shaft was machined and balanced. Light weigh under drive harmonic balancer. Head was cleaned tested machined and ported. Comes with brand new clutch kit with a light flywheel. Engine is ready to bolt in and run.
10
Roll CageLog Book
2.1 Litre engine with 45mm Weber carbies, extractors, 100amp Alternator, Oil cooler, (Original build by Les Collins) Engine & rear diff has done two Autocross events since rebuild 260Z Gearbox Rear Diff - 4.6-R180 LSD with Porsche CV type driveshafts Fully adjustable independent rear crossmember & Trailing Arms Fully adjustable front end DMS Rear suspension with Bilstein inserts in front struts Weld-in roll cage by Fabrications (Rai Curry) Racetech seats with Velo Harnesses Terratrip 303 Hel
4
350 Fuel Injected Chev Engine, built as a project, only dyno time. Never installed to a car. 600BHP @7000. Autronic ECU & Harness, Miloden wet sump . SHP Dart 4 Bolt Block. Crower Crank. New parts include, NC'd Brodix Heads (1188106), stainless valves, Jessel Shaft Rockers, Brodix manifold (HV1814), CP Pistons & pins, Oliver 6" Rods, Isky roller cam 294: 302: 108. MSD dual Ignition 9:1 Comp ratio, tuned & mapped on 98 unleaded fuel. Very smooth & progressive. Ready to install. Ideal f
6
ADL2 Motec Dash Good Working Condition Supplied with new harness and connector as supplied by Motec QLD Also supplied with pinout sheet Brisbane
15
RegisteredRoll CageLog Book
Recent 2Pk undercoat. Body is straight. Spare dash with rev counter. 2 engines 1600 and 2000L with extractor and seperate cross member and stabaliser bar. Both engines turn easily. Standard 4sp gearbox. Spare 1600 cyl head and rocker shaft. Floor,wells and heater bubble origional. Dash cracked, bottom of doors repaired.Did not strip myself but all parts appear to be present. Brake booster rusted. Small rust front floor corners only. Will look at decent offers. Selling as want to buy a caravan.
6
Roll CageLog Book
Immaculate Evo with Targa Barrier Reef podium. Built by LF Engineering in WA. Owned and fastidiously maintained by Ross Dunkerton since late 2018. Further info and more details upon application to 0409117906 Will assist with transportation.
2
Brand new still in box as it arrived from the US WYO Billet Lock Up Unit Includes Trans Dump Valves for air shifting gearbox Was planned to work with a 5 speed Liberty Cost $24,000 to land here from the US and they are more now Save $4,000 and 6 months wait!!
20
Registered
PRICE REDUCED - AMG GTC 2018 Coupe Ready for New Adventures! This pristine sports car, once the pride of the road, awaits its next champion. It’s been meticulously cared for and cherished, but alas, it’s time for a new journey. Only one owner, this beauty has been sheltered in prestige car storage, eagerly awaiting the roar of its engine once more. Immaculately maintained, its condition is a testament to the love it's received. But wait, there's more: Feel the brake power with Carbon Cerami
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
4
Race Simulator. Any car any Track, including rally. As new condition 3 x Screens. Sequential, Paddles and H Pattern Gears. Great fun Drive.
3
New Wiseco pistons New bearings Carrillo rods Internally balanced crank Solid roller Crow cam reground Crane roller lifters Aluminium Yates Roush C3 heads Titanium inlets, stainless exhaust valves T & D shaft mounted rockers, as new Ford Motorsport High Rise Manifold Fully studded heads and main caps Isky springs High volume oil pump High volume water pump
9
Registered
3L Convertable. Shadow black accents, GT2 Napa leather Seats, Ceramic paint protection, 1000 km.
12
Roll Cage
Proven winning buggys. Manufactured to the highest standard 600,750,1000cc motorbike engines Ohlins dampers Anti roll bars Digital dash Easy set up for gravel or tarmac Flat shift Arrow headers Brembo brakes Brake bias Did chain Polycarbonate Windows Braid wheels Sparco seats Call for full spec
10
RegisteredLog Book
2007 CLUBSPORT IN EXCELLENT CONDITION ONE OWNER COLOUR EVOKE AUTO HAYMAN REECE TOWBAR SUNROOF KM 173,462 RELUCTANT SALE
8
Tilton 800 series floor mounted pedal box c/w clutch, brake, throttle pedals. Pedal box is complete with 78 series spherical mounted brake master cylinders, and 76 series flange mounted clutch master cylinder. Is mounted to large alloy base and have cover to bolt over top of cylinders Comes with balance bar and adjusting cable Some options available, as have spare new cylinders, braided lines etc. Can discuss what is needed.
5
4 x Porsche Turbo cup wheels, phone Lee on 0419200201 for any information please.
19 1
RegisteredLog Book
This is one of the rarest of the rare Bullet Roadsters. Built as one of the 2 first V8 prototypes prior to the vehicle achieving full Australian compliance. The only one in this colour, a Lamborghini Silver, this Bullet was owned by its creator John Bettini until approximately 2017. It was then bought by a gentleman in Ipswich who sold it to me in 2021. Unfortunately due to age and health reasons I can no longer keep this awesome piece of machinery. Only travelled around 23,000k's(still used re