51 Parts, Accessories or Other for sale

427ci LSX, twin turbo race engine. Was originally in jet sprint boat but just needs a water pump and some plumbing modifications to the dry sump to run in a car. Comes with Motec M150 ECU with antilag, GPS ect Dart LSnext Block Titanium crank and rods, Allpro heads with titanium valves (springs and inlets replaced recently as part of routine maintenance) billet dry sump and pump 75mm bullseye Steve Morris custom turbos Custom billet Steve Morris Intake, No expense spared to build the engine

PRICE DROP!! Get your hands on an Aussie Car engine that will take you from the back of the grid to the front. Same specifications as Jack Boyds car that was ran third in last two events in 2025. Has all the go fast bits, you will not be disappointed. Have moved my car on and no longer require the engine, so give me a call and let's do a deal. $15000.00 or near offer.

Brand new in boxes, never fitted or had tyres on them all 4 measure 15x10 Edge to edge measurement 265mm Back spacing from flange face 150mm Front spacing from flange face 115mm Wheels are in perfect condition, as expected for being new unused Have been sitting for over 20 years Suit historic race car, absolutely unobtainable now, looking for offers over $6000 AUD, can post as buyers cost Located Hahndorf, South Australia No time wasters please

Porsche parts including but not limited to. Fresh Gear box, doors, bonnet, roof with support frame, front guards, front lights, front and rear bumper, fuel cell, carbon rear engine cover small damage, front sub frame, full set of new radiators and much more any parts needed just reach out. Also have complete car for sale as surplus to requirement. All parts are currently in NZ but can be easily sent over. I am based in South Australia.

Mitsubishi 4B11T – Engine was built as a backup, no longer required (Never started) Full forged internals on stock crank, all items and work listed below. Have all invoices from work performed and parts purchased, machine work and assembly completed by reputable workshop. Cylinder Head – Kelford s2 Cams 214 Recondition cylinder head Remove and replace 16 valve guides Hone guides to suit valve Check and adjust valve spring tension Seat and shim clearance x16 Line bore cam caps Billet cam c

Aussie Racing Car engine as used in the #38 JCRE Mustang at the Adelaide 500 - 3rd for the round. Completely fresh build prior to the meeting including: - Dyno sheet supplied - approx 150HP - Overhauled cylinder head with KibbleWhite valve springs - 82mm Wiseco Pistons - Brand new INEX water cooled cylinder - Brand new conrods, conrod bolts, and bottom end bearings - Brand new clutch basket - Reconditioned gearbox, with brand new 2nd and 4th gears. - Brand new oil pump - Baffled sump - Slotte

AiM 7" tft colour logging dash, used but in great condition. Removed from a local sport sedan. Includes gps module, wiring and sensors Shipping available aus wide New retail price $4620 This is 'as new' condition with warranty.

S54 ESS SUPERCHARGER KIT without intercooler (did not use for my purpose) Vortech has been upgrade to v3 si trim and rebuilt by Capa Performance Water Meth Kit can be included at extra cost Kit suit BMW S54 Motor (e36/e46) 7 rib setup / 77mm pulley Brand new kits are $18k

Ratio 1 - 2,500 2 - 1,800 3 - 1438 4 - 1,235 5 - 1,111 6 - 1000 Rebuilt with new dog gears - receipts to go with. Selector CAE SHIFTER and Tilton Clutch available at extra $ The Samsonas Motorsport 6-Speed Dogbox Gearkit for BMW E36 is designed to fit into the original E36 5-Speed ZF S5D Housing and includes aluminum plate with bearings, making the completed gearbox 52mm longer than the stock ZF S5D and 50mm shorter than 6 speed Getrag S6S. This gearkit features a new surface and profile bi

Pulled from 2010 Holden VE Caprice, this 6- Speed Automatic Transmission Is in good working order 153,000Km - Comes with Converter - No damage or issues - Ready for install or swap - Perfect for performance builds, replacements, or swaps •Message or call Ash for inspection 0433 565 219 •Pickup preferred,freight can be arranged at buyers cost. Serious buyers only.

For sale is my Renegade x APG front and rear big brake kit for Honda S2000. Selling as I’ve decided to go a different route with the build. Can provide a brake template on request. Kit is brand new, one rotor/caliper were test fitted, never driven. I paid $5,200 USD ($8,000) for the kit plus freight from USA. The red calipers and rotor hats look incredible. The calipers fit common size brake pads to allow for easy maintenance, same as the rotors. The rear calipers retain the OEM handbrake.

APG Big brake kit to suit FD3S RX-7. Used less than 5000km's Full bolt on with braided brake lines. 356mm x 32mm front disc Full floating rotor 330mm x 28mm rear disc Full floating rotor Inline hand brake kit for standard hand brake cable. Finished in Iron grey anodized. Race pad Reds (over 50% left) Optimal temperature range: 100~700°C Maximum temperature: ~750°C Coefficient of friction: 0.42~0.58 Went larger setup, no longer needed.

Monobloc racing calipers Alcon 6 piston Titanium pistons 210mm centers 42mm offset Up to 390mm brake discs

Surpluss to needs. Hitco carbon/ap racing 380mm discs 340mm discs 6 pot pads 4 pot pads Used in top tier Timeattack, Lmp and track days. Not to be confused with ceramic carbon used on exotics.

Electomotive Ignition System for 4 Cylinder engines, Came from my spares from my RT4. Includes XDI2 Volt pack, trigger wheels and brackets, wiring, 2 x weber carb tuning flow meters, all as in the photos. This a fully programmable ignition system. If the AD is up, then they available. Will post anywhere in Aust for $50.00,Else where by quote, or your Courier Company.

Complete fuel Injection system for Essex V6 which was removed frm a TVR. Air box and throttle body, inlet manifold, injection pump and injectors. Wiring harness probably incomplete.

AP Racing CP3985-230EV x3 brand new, & x1 used, bought for my Nissan GT3 but have now found a set is stainless steel HD version so fitting these instead. Great price, great opportunity, can be collected or i can post.

PORSCHE 996/993(964/944) 18 INCH BBS GT3 RIMS IN TOPCONDITION 7,5jx18 et 50 10jx18 et 65 These Nice Rims fitted under a Porsche 996/993 Narrow Body ,and with spacers rear from 10 mm under a Porsche 964 and Porsche Model 2

HDT Big Brake kit. Fits inside 19" SSV wheels. Used for approx 500 kms, as new with mounting kit, dog bones etc.

412 cube Nascar sb2.2 engine full dry sump comes with Ignition and fuel system twin carbs headers and converter to suit 2 speed glide. Approximately 25 passes has run a best of 8.39 quarter.