30 Race Parts / Accessories for sale
Most Recent
Most Recent
All Results
2
DSSV Damping Technology shocks Originally from a SCCA title wining Prototype D Sports Racer. Used for testing and one 13 lap race.
3
Pair of Penske 7500 series double adjustable gas charged shocks. These are like new, limited use - too long for my setup. 15.5" exended, 4" stroke, 11.5" compressed lengths. Top knurled rebound adjuster, bottom allen key compression adjust. These shocks are set for fine tuning with 75 clicks compression and 45 clicks rebound. Has 1/2" bearing top, 5/8" bearing bottom, but can change of required. These shocks will cost around $2,600 aud a pair new in Australia.
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.
1
Purchased new two years ago and never used due to this assembly being much too difficult to fit.into our race car. This is Wilwood part number WIL-340-3950 and the purchase price today (in Australia) is around $400- including postage. Accordingly will clear this from my collection of car parts with a sell price of $300-
1
Purchased this unit twelve months ago with the intention of using this in our Improved Production Torana race car however found that it could not be fitted due to limited room under the dash This has never been used and the current sell price for this throttle pedal with the mechanical linkage system is $724- SKU 72615 and SKU 72-79X Do not consider we will use this and would take $480- to clear this from my collection of car parts.
8
Chev 350 brodix heads stage 10 and match ported victor junior manifold. Flowed by Bill Hanson 800 hp with brand new stainless steel valves lapped in ready to go, just needs springs and rockers $2,300 ono . Also circlematic kit for powerglide trans new $600 ono.
2
$16,000 Holinger RD6-H gearbox for sale. In excellent used condition. Regularly serviced/checked by Race Torque Engineering. Last ran at Phillip Island November Island Magic in VN GpA #5. Moving to sequential so genuine reason for sale. Being removed from car this week. Comes with input shaft and gearstick. Price reduced to sell, sitting on the bench.
11
1 set of front and rear 2 way adjustable dampers and springs complete to suit Porsche 2011 997 Cup Car. These were custom made by Supashock. They come with dyno sheets and instructions on use. No longer have the car they were made for so they need to go.
3
Through a series of sales and swaps I've managed to get a hold of this Link FuryX ECU. Top of the line offering from Link ECU before going to the G5 Voodoo. Brand new in box, with manual, ECU is unlocked. Missing the mount and tuning cable, requires header plugs or loom to suit. Will require a complete wire in from competent sparkie. I also have a Bosch 4.9 LSU O2 and a Haltech IAT Sensor if required (+$200) Pickup in Seville Grove, Perth 6112 or can courier Aus wide. Selling to fund a H
9
Genuine Europipe, imported at a cost of $9000 AUD. Used for less than 1000km. Removed for sale of car. The best system for the 2RS! Sounds incredible with new OE install hardware.
1
Brand New Unused still in original packaging IV-IX Sequential Gearbox Strong from Shift Gearboxes only delivered 2 weeks ago. For all information see: https://www.xshiftgearboxes.com/race-gearboxes/mitsubishi/mitsubishi-sequential-gearbox-evo-4-9-x-5-speed-strong
9
Bought new in 2005 bare, built for 2006 used for 1 year , have been on the shelf ready to go excellent condition ring Mark 0427930612
5
These OZ Racing, Italian made, Ultraleggera wheels are brand new never having had tyres fitted. The most well-known 6 double-spoke wheel ever! Ultraleggera is known and recognized as one of the most popular OZ wheels. The wheel design is Formula 1 race-inspired. Its racing DNA is apparent in several details: the spokes are slim and extend all the way out to the external lip, the centre is carved out. Two (2) wheels included in sale. Sizes are 8"x18" with a stud pattern (PCD) of 5x108. Offset
4
Rose joint Rod End Steering Pin. 4140 HT Steel. Suite Commodore. Two pins per pack. $180 Front suspension shock tower cap. Suite Commodore. 10mm Offset. Comes with bolts, washers and one 3mm drill guide bolt. $200.
4
AFR 227 aluminum heads. Were on a 434 small block. Don’t know the technical specs on the heads as they were on the motor when I got it. you get the heads with the jesel shaft mount rockers and crower roller lifters and lash caps
3
SSR GT1 19inch wheels are a brand new set of 4 in original boxes and never fitted on a vehicle, they are made in Japan and a premium quaility product. Come with hub centres and new wheel nuts to suit Nissan vehicles. Took 5 months to be delivered from ordering, cancelled Nissan Z project forced sale. Invoice available proving purchase of $2250 from a Autotechnic and genuine SSR wheels. Staggered set are 19x9 1/2 pos 35 and 19 x 10 1/2 pos 22 PCD 5X 114.3. Suited to many vehicles with 5x114.3 pcd
8
Brand new, never fitted. Changed direction with my build so surplus to requirements. Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S550 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 1⁄2-inch DOM tubing, BMR’s K-members give you a lightweight, extremely strong K-member. Ever