31 Parts, Accessories or Other for sale
Most Recent
Most Recent
All Results
6
samsonas gearbox SR20 Bell housing H pattern , Shifter Tail shaft , crossmember like new, One track day! ph 0418818419 cash talks
2
DSSV Damping Technology shocks Originally from a SCCA title wining Prototype D Sports Racer. Used for testing and one 13 lap race.
3
Pair of Penske 7500 series double adjustable gas charged shocks. These are like new, limited use - too long for my setup. 15.5" exended, 4" stroke, 11.5" compressed lengths. Top knurled rebound adjuster, bottom allen key compression adjust. These shocks are set for fine tuning with 75 clicks compression and 45 clicks rebound. Has 1/2" bearing top, 5/8" bearing bottom, but can change of required. These shocks will cost around $2,600 aud a pair new in Australia.
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.
5
Only 1,527 Race kms since new. Sealed by Bates Motorsport to run in either TGRA 86 Series or TGRA Scholarship Series. Standard flywheel and starter motor supplied with engine. Will require series mandated lightened flywheel to run in the series. Supplied ex Adelaide.
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.
1
Purchased new two years ago and never used due to this assembly being much too difficult to fit.into our race car. This is Wilwood part number WIL-340-3950 and the purchase price today (in Australia) is around $400- including postage. Accordingly will clear this from my collection of car parts with a sell price of $300-
1
Purchased this unit twelve months ago with the intention of using this in our Improved Production Torana race car however found that it could not be fitted due to limited room under the dash This has never been used and the current sell price for this throttle pedal with the mechanical linkage system is $724- SKU 72615 and SKU 72-79X Do not consider we will use this and would take $480- to clear this from my collection of car parts.
5
2.0L Milligton diamond series 2 engine. Engine has done 2 events since rebuild. Pistons, bearings, valves etc. Comes with Dta management, twin plate ap clutch and slave cylinder. 6 speed samsonas sequential gearbox. No events since freshen up. Comes with a second set of drop gears and some spares, dog rings etc. May separate. Engine will have to be sold first. Perfect Ford escort rally setup. Only selling as I am changing direction of what I am doing with the car. Engine is still in car and
1
NISSAN 370Z (2009-2014) / FAIRLADY Z Z34* SEIBON GTR-STYLE CARBON FIBRE HOOD. Custom made in USA with delivery due February 2024. Sourced through Empire Performance, Myaree W.A. Price plus shipping in Australia.
8
Chev 350 brodix heads stage 10 and match ported victor junior manifold. Flowed by Bill Hanson 800 hp with brand new stainless steel valves lapped in ready to go, just needs springs and rockers $2,300 ono . Also circlematic kit for powerglide trans new $600 ono.
5
Honda K20 FD2 Mugen CN long block. 10 hours on engine as per logging data
1
Brand New Unused still in original packaging IV-IX Sequential Gearbox Strong from Shift Gearboxes only delivered 2 weeks ago. For all information see: https://www.xshiftgearboxes.com/race-gearboxes/mitsubishi/mitsubishi-sequential-gearbox-evo-4-9-x-5-speed-strong
9
Bought new in 2005 bare, built for 2006 used for 1 year , have been on the shelf ready to go excellent condition ring Mark 0427930612
4
Have a set of dart 215 cc iron eagles heads. 2.15 intake valves 1.60 exhaust valves. Heads were redone all new 2 yrs ago all new valves valve seat and springs. Been sitting in my shed was going to use them but lost interest in project heads were on a 421 stroker dirt modified motor. Heads need to be cleaned.
4
AFR 227 aluminum heads. Were on a 434 small block. Don’t know the technical specs on the heads as they were on the motor when I got it. you get the heads with the jesel shaft mount rockers and crower roller lifters and lash caps
3
SSR GT1 19inch wheels are a brand new set of 4 in original boxes and never fitted on a vehicle, they are made in Japan and a premium quaility product. Come with hub centres and new wheel nuts to suit Nissan vehicles. Took 5 months to be delivered from ordering, cancelled Nissan Z project forced sale. Invoice available proving purchase of $2250 from a Autotechnic and genuine SSR wheels. Staggered set are 19x9 1/2 pos 35 and 19 x 10 1/2 pos 22 PCD 5X 114.3. Suited to many vehicles with 5x114.3 pcd
8
Brand new, never fitted. Changed direction with my build so surplus to requirements. Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S550 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 1⁄2-inch DOM tubing, BMR’s K-members give you a lightweight, extremely strong K-member. Ever