39 items for sale
Most Recent
Most Recent
All Results
4
Orig.built for large 4wd(doesn't fit my 4runner) never used.Est.65-70 litre capacity.Top quality.Suit many applications.
9
1 set to suit Mercedes Benz C-CLASS ESTATE (S204 RWD) 2008-2014 1 set to suit Audi S4 8K BRAND NEW in box - Neither used nor fitted https://www.agtsuspension.com Designed for the perfect balance between comfort and control using the best materials available. AGT is sold in over 20 countries as AGT and OEM. For other models, please enquire. Features - Inverted monotube coilover - Long travel design - Salt-spray tested for 240hrs - Dyno tested Quality - British-imported damping oil - German oil
3
02-20 STi The Twin Plate Organic Clutch kit offers high torque capacity whilst retaining driveability on the street. Designed specifically for high horsepower street driven vehicles, the 230mm Twin Plate Organic is the ultimate road going clutch. The Twin Plate Organic kit optimises pedal feel and reliability in street driven vehicles. Was removed due to being to aggressive for my street only car after a week NOW $1,773.24 WAS $1,970.27 SAVE $197.03! On car mods Australia on sale until jan 8/23
2
Locally designed and manufactured 8 stack Billet Manifold to suit Ford Coyote Engine. Features a EFI Hardware race tested DBW motor, connects to OEM plugs & works with factory ECU Manifold will be supplied as shown in the photos, ready to be fit to your engine. Package will include all required O'rings, bolts, etc for proper fitment. NOTE: Manifolds are currently being manufactured, due for shipment by Mid-December. Can ship Australia wide or internationally. Shipping with incur an additiona
15
Group A VL Walkinshaw Genuine Twin Throttle Body Intake Mainfold and genuine rocker covers to suit. In excellent condition (taken off near new engine, over 30 years ago). Genuine, original idle control, fittings and hoses. Genuine, mint condition rocker covers (polished). Taken off my own personal group A engine in 1990 and has been owned and stored by myself for over 30 years. Has not been tampered with or ported, in its original state. Still has original thermostat, housing and sensors a
4
1 set new rear dampers to suit top doorslammer complete with springs and dyno sheet.
4
Crower 10" Pro Sportsman clutch and flywheel suit T/A KB/Hemi.Both are in very good order,no pulled threads or inserts,includes 6 new discs and 3 new floaters,Crower setting gauge,paperwork and alot of weights/bolts to get started. SMS or call preferred to email.
3
Up for sale are 4 BMW 436M M sport wheels in Ferric Grey. BBS Make. These came off my M135i and are currently fitted with Nankang AR1 Semi Slicks. They have seen 2 track days, depending what they are fitted to and how hard you drive they will do many more. Staggered setup of 225/40 and 245/40 Front: 7.5"x18" Offset ET45 PCD 5x120 Rear: 8"x18" Offset ET52 PCD 5x120 Overall in great condition, a bit of kerb rash on some of the rims (see pics) no structural damage.
3
Supashock adjustable suspension set up for Nissan GTR R35 https://supashock.com/en/motorsport/
4
Full 6 point bolt in roll cage. Only used for 2 days then removed from car ,fully bolt in no cutting of anything beautifully made and is as new. Ready to reinstall. Suit Nissan GTR R35 Will supply new weld in plates for mounting to floor at asking price. Buyer to organize own freight. Cost $3300 sell $2000
9
Lenco 3 speed Has reverse Fine spline input ( suit modern clutch’s Corse spine output Ratios are 2.15:1, 1.56:1, 1.38:1 12 bolt cases Box was bought from Jonny Rocco in the US Was then inspected/checked by Dave Erickson of Weatherill park performance center ( has new sprags, clutches and steels) The box has not been used since Can assist with freight
1
Small block Chev Engine up for sale $17,000 may be willing to seperate Consistent 8 sec motor Racer Pro 23 degree aluminium heads T&D rockers Dart little M block 4.125: bore Scat forged crank 3.875” stroke Scat 6.000” H-beam rods Ross forged pistons Comp Cams solid roller Crower severe duty lifters Trend moly pushrods Moroso steel oil pan Moroso oil pump Meziere electric water pump MSD billet distributor, MSD 6AL, MSD Pro power coil, MSD leads System 1 oil filter Edelbrock Victor ram intake En
7
533 cube BBC Blower Motor. New engine never been started. Manifold to sump Chev block 4 bolt mains,Howards main caps,grout filled.Ohio crankshaft 4340 BBC,Crank hub and bearing support,Bullet custom grind cam (326/336-R1/4 S/NO 91264),Crower Rocker Assembly (1.7 Intake 1.7 Exhaust).Crower sever duty cutaway .903 rollers,Bill Miller Pistons 494 Solid Dome (Bore 4.6050,Comp Height 1.250,Fly cut)Bill Miller Alloy Rods,Moroso Oil Pan,Ported Heads and matching manifold.Miloden gear drive.Sumner bros
6
ICEngineworks 2000 series full kit. Most of the kit hasnt been taken out of packaging. Used the blocks once. Great kit to use. No longer needed. Cost $3000au landed after import tax.
10
Genuine Advan RS-D Wheels 19x10+25 5x114.3 for sale. These are a rare discontinued model. Includes genuine centre caps and Zestino 275/30R19 tyres with plenty of tread. Wheels have some gutter rash which has been factored into the price.
7
3 x Clutches 1x East west Clutch 10.7 inch Pedal Clutch Many spare plates Refer to pics $4500 1x Crower 10.7 inch Pedal Clutch Many spare plates Refer to pics $4500 1x Crower 10 inch Slider Clutch Many spare plates and steels Bellhousing and starter motor Refer to pics $6500 All Clutches from a Hemi Pick up Somerville Andrew 0400 350 057
3
Supercharged Outlaw Hemi Keith Black block Brad V Heads Littlefield LB-22 Hi Helix 1471 New Diamond Pistons New BME Rods New Enderle 110 Fuel Pump This Engine comes Sump to Hat complete ready to run Comes with tune up etc $42,500 Pick up Somerville Andrew 0400 350 057
14
Nissan 370Z rolling shell, custom Roll cage with side intrusion, air jacks mounts, billet steering Coolum, front nudge bar, lift off doors, rear separation wall, the fabrication so far has been over 16k without the pedal box and airjacks, and velo seats. I have the standard hatch and bonnet and guards but no lights. Car was imported with flood damage originally so not in a accident and written off, it’s a straight clean shell. I’ve lost interest so my lose will be someone else’s gain
2
G force gf 2000 McLeod clutch and billet Steel flywheel Ser5 bellhousing Ihra approved steel shield Starter motor right hand drive shifter Gearbox crossmember Mark Williams Tail shaft yolk complete set up from Pac performance rx3 13b dentist has run 7.0 all in perfect working order ready to use $12000