434 items for sale

2011 Galvanised chassis Ali top Re door and side door Hydraulic tipping with ramps Electric brakes and front winch Dec, size 4.5 x 2 m height 2m Twin axle good tyres

This was originally built in 2007 and fully refurbished and upgraded in 2021, including a 150x50mm A Frame. Break back and beaver tail Roller rocker suspension Checker plate sides and A frame Redarc breakaway system on both axels 2m custom heavy duty aluminium ramps stored under on Teflon skids Tare: 960kg GVM: 2,920kg NSW Registration until 23.2.2025 Total length: 6.5m Deck Length: 4.5m Width between guards: 2m Total width: 2.5m Height of box: 2.2m Box dimensions: 650mm H, 750m

- 2015 Build - Auto Transmission - Immaculate 8.5mtr x 2.49mtr Beavertail Tray - Heavy Duty bi-fold ramps w. Electric power pack - Previous use Prestige car transport - Can take LOW height vehicles - BIG 7.2 ton Payload, electric winch on deck - Suit Motorsport, car, trailer, or machinery haulage - Air to rear suit large trailer, Tow Ball, Anderson plug - Mainly Interstate KM's - Large toolbox at front can fit 8x 17-18' wheels, 2400 x 780 x 700, Belly Locker on side - Tidy inside & out of cab -

Pristine condition 2018 Futura lowering trailer which has always been stored inside. Factory lockable tyre rack, rock guard, car winch, spare wheel (mounted underneath), tie down straps, break away protection. Tyres near new, new battery & trailer is also fitted with an additional lockable checker plate tool / storage box. Due to construction & light weight (600kgs tare, 2500kg gross), most cars can be carried without he need for larger 4WD type vehicles. (please check your own vehicle for compl

1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit

Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen

Vl Sports Sedan. Recently professionally built space frame with front and rear ride height adjustability and driver ergonomics factored into the chassis. MSF Racing Big bearing front hubs & calipers, David Bos built 9inch floating cambered 3 link rear end with watts linkage and adjustable (Derek Van Zelm) rear blade sway bar. Set up for destroked Ls3 or run a turbo SOHC billet RB30. Comes with moulds.

FOR SALE: Front Running Hyundai Excel Racecar - $20,500 ONO We're offering this professionally built Hyundai Excel Racecar whether you're a seasoned racer or a beginner built to the high standard, turn the key and go. Key Features: - AGI National bolt in roll gage - Fully logbook and rebuilt engine sealed by ACT Autoworks only done 3 races since rebuilt - Racetech circuit seat - Custom Airbox Setup - Quick release steering wheel - Alloy floor plate - Short shifter - Race built gearbox

Championship winning Spectrum 011K as raced by Daniel Holihan. This car has multiple wins, podiums and championships to its name, along with a freshly rebuilt motor built by Luke Ellery from Ellery Motorsport down in Victoria. This car has been maintained by World Time Attack Champion Barton Mawer in the past and has a load of data and engineer tricks and tips to go with it. This car was built from the ground up only 2 years ago which was previously a Duratec raced by Tim Hamilton. It comes w

BMW 130i 3e Production Car - For Sale or Hire Here’s your chance to own the 2023 Australian Class C (APC) Championship wining car. Extremely reliable well sorted and put together package that is still capable of podiums at the highest level of production car racing. This little BMW had a full refresh at the start of 2024 for the Bathurst 6hr and is ready to go for the new owner just add fuel and go. New CSF Radiator New clutch New water pump New Alternator / belts New leads and plugs New

I have put up for sale my Scania truck that is set up as an enclosed car carrier transporter. Many tens of thousands of dollars over the past 18months have been spent in getting it built to take race cars, lowered cars, show cars and big boy toys that will take variable widths and lengths vehicles. The truck is perfect for anyone wanting to start off straight away as all the hard work is done and is ideal for the race car team or someone looking to start out their own business in carting exp

Engineer built for personal use.Single axle, torsion suspension,NO RAMPS, hand winch,DRIVE ON/DRIVE OFF or winch.1640(5'4") wide 3300 (10"10"")long (rails).Width is adjustable IN.Ratchet straps at front.ELECTRIC BRAKES/Hand brake .14x6 Sunraysia wheels/185-LT tyres(90%).One person operation,Will not disappoint.NSW Reg X22090 expires April25.

Perkins Engineering VT036 silver bullet 2000 Russell Ingall car Refurbished in 2016 Run at festival of Motorsports Adelaide 2017, log books x3 from 2000 up to date has not been used since 2017