393 items for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
9
Car has been built for track days. Engine built by Top Torque to make around 220kw atw. Ej20 Engine with forged pistons, H beam rods, Arp head studs and MLS-R head gaskets. All bottom end bearings are race series. Apexi power FC. Dyno tuned by Rev Zone with a safe 160kw atw on 18psi. Full turbo back mandrel bend exhaust. Arc intercooler STI Front seats STI Front strut brace STI alloy control arms Whiteline sway bars and end links Whiteline anti lift kit Whiteline strut tops Adjustable shocks
7
This is a single axel box trailer built in 2010 which has been meticulously maintained by the current owner. All up weight as bare trailer is TARE 430kg, comfortably towed by a medium family SUV (Mazda CX5) I have used it to transport my Caterham Superlight to various MSCA Sprint events, track days, hill climbs etc etc. That car is now sold and the purchaser had their own trailer hence the sale of this one. This trailer could be used for anything really; bikes, go karts, formula, open wheel ca
119 1
Roll CageLog Book
Think GT3 racing and it is impossible not to think of the Audi R8 LMS GT3. One of the most successful GT3 race car of the modern era, it has amassed 83 drivers’ titles internationally and 106 championship victories – as well as eight overall victories in 12-hour races (including a record three at the Bathurst 12-Hour) and 13, 24-hour victories. It more than meets the challenges posed on all racetracks in all climatic zones and has won titles in Saudi Arabia as well as in Central Europe, Asia, A
6
This Truck was used to transport a race car. It comes with toolbox and ramps and ramp extensions for low vehicles. The tyres are almost new and serviced it regularly. It is a 3 seater and it’s very reliable. I still have to clean it out. Pan size is 6100 long 2450 wide and 2300 high. Low mileage 398000km.
10
Roll Cage
Hi, I have for sale my 2010 WRX Sti Spec R hatch with 80000km on the clock. I have owned the car for 3 years and it has been my dedicated track car for the last 2 years, previously being a registered street car. The vehicle is fitted with everything you need to reliably compete at club level track days, autokhana, time attack or rally sprints etc. and has had an Ecutek dyno tune by Maximum Motorsport after all engine work was completed. The car has been maintained to the highest standards by mys
14
Roll Cage
URD-BMW C81 World Endurance Racing Group C Racing Sports Car. Make/Model URD-BMW C81. Year: 1982 Chassis: 5P 001 Constructor: Ungar Racing Development (URD) in Gradenau (Stuttgart) Germany. Designer: Ernest Ungar Chassis: Multi-tubular steel square section tubes with riveted aluminum sheets at cockpit and front box for pedal box. This is a reinforced space-frame, flat bottom Group C, Endurance Sports Car. Engine: BMW 3497cc, M88 (M1) S6 In-line Six, 490 bhp with Kugelfisher Bosch
6
Roll CageLog Book
1980 TIGA SC80 S2000 Sports Racing Car. Chassis: Aluminum Monocoque with tube Bulkheads and engine bay Engine: Ford Pinto 2,0L SOHC Gearbox: Hewland Mk9 (dog box) 4 Speed Transaxial gearbox. Has a Motorsport Australia Logbook and C of D. This car originally campaigned in North American SCCA Oregon Northwest Region and British Columbia, Canada. In 2013 the car was completely re-built and re-tubed by Marc Bahner Engineering in USA, fitted with a new light weight fiberglass bodywork. A number
5
Roll CageLog Book
1973 Brabham bt41 Formula 3 Race Car. 1600cc Novamotor Twin Cam with 45 Twin Side Draught Weber DCOE Carburettors Gearbox: 5 speed Hewland Mk9 (dog box) Transaxial gearbox. Chassis: Aluminum Monochrome with steel tube bulkhead and engine bay with rear selection Tubular Space frame. Bodywork: Fiberglass with front and rear wing aerodynamic aids Comes with CAMS C of D and Logbook. Alberto Colombo campaigned this car in the 1973 Italian F3 Championship with six wins in the 1973 Championship E
8
Isuzu FRR550 crew cab 11/02, 6HH1 non turbo, 6 speed ,a/c, p/s, air park brake, Air drivers seat. (Ex SES) Genuine 51000 kms Drives like new Great condition. No reg.
1
I bought this truck as was, It was going to be the new Kumho Motorsport truck. (And my race truck on the side). F$%#kin TCR. It is set up to transport 1 car with a separate Kitchen/workshop area up front. It has room for a medium size sedan with the divider wall in but I have also seen this truck carry V8 Supercars. It is well set up with extender ramps to carry up to a 2500kg sedan. Since purchase, I have spent over $20K bringing it back to A1 spec. This spend included all the mechanical updat
8
2012 tandem race car trailer Beaver tail Hidden pull out ramps Electric winch Will come with a new battery Breakaway system Deck is 14ft Total length of trailer and draw bar is 20ft Inside the guards are 1,900mm The total width of the trailer is 8ft Registration until November
10
Roll CageLog Book
Race ready! Regretful sale of my Mygale formula ford and spares due to life commitments. Vehicle is a 1995 Mygale SJ95 Formula Ford with a Ford Kent Crossflow engine. It is chassis number 2 which is pretty awesome for a collector and it's an ex-Team Australia car. Would be an awesome collectors item. Vehicle was purchased mid 2023 and was brought up to spec to compete in 2024 with a new dash, rain light, and other misc bits. Has only done a handful of test days in my possession and drove great
19
Roll CageLog Book
Porsche 718 GT4 Clubsport Competition Race Car Never been raced No accident history 3 sets of wheels and tyres (1 set with near new wets) Air Jacks Spare brake pads Passenger seat installed 10,800kms Stilo radio pictured not included Fully maintained by Porsche Doncaster and ready to go.
12
2007 Isuzu NPI 300 Pantech Truck 150HP Turbo Diesel Intercooled Motor 5 x Speed Manual, Air Conditioning, Electric Windows, Central Locking, Rear Camera Monitor System 2.0 Ton Tieman Cantilever Lift, 2.4 m Wide Platform. Includes Aluminum Platform Extension Ramps. Installed November 2018 Pan Internal Lift, 4000kg Hero Auto 4xPost Hoist activated by Nixons Engineering Hydraulic Power Pack 24 VDC with 12 Liter Tank. Installed April 2019 39HD H/Duty Rear Spring Set. Installed July 2019 Re-Skinned w
15 1
Owner Is Keen to Sell, The Car is in excellent condition !! NEVER had a major hit or damage. Watch The Video Link: In 3rd Place at Sandown until we were passed under yellow flags................ The Market Determines The Price, not the seller :) So contact me to discuss...... :) Mygale SJ11A Formula Ford This Model is the latest Mygale configuration with lower side pods and chassis mods etc Ex Jack LeBrocq & Tom Randle Car (See Attached Photo) As Raced by Jack Clifford in the Victorian State Se
20 1
Roll CageLog Book
Winner of 2022 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded - 3 of 4 rounds contested for 7 Class wins, 3 Round wins, 3 Outright race wins. Two wins (including one fastest lap) and 2 second placings in Round 1 of 2023 AASA Victorian Motor Racing Championship - Super TT Over 2L Treaded. Then competed in 2 rounds of 2023 Victorian Sports Sedans Championship for something different and to race at Phillip Island. Quick car that sounds great ! Motorsport Australia & AASA L
4
Porsche 992 Cup Car purchased new in 2023 for the 2023 Australian Carrera Cup Season run and maintained by PCM, 3 sets of wheels, travel nuts, safety stands, and car cover, original car NO RESHELL, good clean original car, 5458klm with 35 engine hours. $395,000 + gst.
3
This is a 1970's flat track bike with an OSSA Stilleto TT engine (also refereed to as a Dick Mann TT engine), these motors were produced for American Junior Class Flat Track with around 36 hp, I have had this bike for many years, unfortunately at 70 something I am not brave enought to race this rocket. I was told by the person who sold me the bike that the frame was a copy of an Alstar, but I cannot confirm this. Some years ago I removed the front brake and changed the rear manual disc caliper w
6
Brand New, 7.3m Box, Tandem axle on Roller Rocker Suspension, 3500kg Axles, 4 Ton Spring set, Electric brakes x 4. Rear Electric Winch for Door, rear door has nice clean lines, with Overhang to roof with downlights for night loading. Polished Alloy trim all round. 1970mm between guards internal, 1600kg empty Tare, with 3500kg GVM. 6 Stud CNC Machined Alloy wheels with Load Rated Tyres 1100kg each. Caravan side entry door. Inspections Welcomed.
19
I purchased with the idea of building a race car but I already have too many other cars and projects. Written off (stat write off) due to some basic damage to the rear quarter panel, some suspension arms and a wheel. Both the guard and the suspension arms have been repaired as shown. I'm happy to share the progress photos of the repair to the quarter panel but it was just from a car park fender bender and was nothing considerable at all. (refer to last photo) May 2023 build date. Price is 65