SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

63 items in Australia under $10,000 for sale

Refine Search

Clear All
Keyword
Price
Minimum
$10,000
Listing Type

Featured ads

All Results

7
Roll Cage
Brisbane Sumner 4074 inspections welcome Monday to Triday 9am to 4:30 pm Great BMW E36 with 2.5 litre 6 cylinder. 5 speed manual with heavy duty clutch. 2019 new 6 point front an rear quality roll cage, race seat and harness. Coil over suspension. Air conditioning still connected. Intercom with roof aerial. Good tyres and superb brakes. Ready to go on your next adventure or track day. Was purchased in 2019 in great condition, original paint, and with a perfect white leather interior and used

Sumner QLD, Australia
Share
Watch
9
2004 206 gti 180. Car has been stripped ready to be converted into a race car. All interior parts come with the car. Body work is straight and not long been painted satin black. Car has a clean title with sa plates. Also with the car comes a second 206 gti 180. Ex autocross car. Body work is rough but does have a cams approved speed roll cage. Rear is built to rally spec. Only needs a few more front bars to be a full rally cage. Head is off the engine. Suspected blown gasket. U.K built BE ge

Murray Bridge SA, Australia
Share
Watch
2
Bare chassis in good condition to use for racing or to use as simulator

Matraville NSW, Australia
Share
Watch
9
Log Book
Perfect base for IPRA build/24hr Lemons/ BEERS/ Cheap Car Challenge and similar budget enduro racing series SR20 and 5 speed, both in good condition Full service done including all fluids, filters and spark plugs Weld in Rod Kilby full cage with intrusion bars Kilby modified bride seat runners (driver and passenger) - allows for easy driver changes Race seat and 3 inch harness Brand new DBA rotors Brand new Winmax pads front and rear Brand new braided brake lines Brand new front camber pins Bra

Tarlo NSW, Australia
Share
Watch
7
Great transport trailer Rated 3.5 tonne 2.4M wide 4.8m long

Dandenong VIC, Australia
Share
Watch
7
1960 rice enclose race trailer. Believed to be the ex Apex Motors Full independent suspension Ex Laurie O Neil Purchased via Frank Matich By Rod Hiley the of Abingdon Motors Brisbane is currently Regoed but will need some tyres . Has been repainted in cream and Brown Some imperfections.

Cashmere QLD, Australia
Share
Watch
10
1993 Daihatsu Charade 1.6l motor tuned 5spd manual Full exhaust system Adjustable stiffness shocks and lowering springs all round Sports stiffened sway bars front and rear Strut brace Rear disc brake conversion Race seats bolted to factory rails Detomaso Wheels and Body Kit Comes with tonnes of spares, brand new boss kit, original front seats, spare set of 13inch wheels, original suspension, original air box etc And more stuff I’ve forgotten Could be road registered with a bit of work, all the

Bittern VIC, Australia
Share
Watch
5
Roll Cage
Mallock MK31 chassis and body moulds. Includes suspension, front uprights, rear Escort diff housing.

Edwardstown SA, Australia
Share
Watch
9
Roll Cage
Nissan Pulsar SSS N15 You're choice, repair or re-skin. From rear shunt body damage. IPRA 2L engine. Header large bore exhaust. Alloy radiator, Electric fan, cold air induction. Series yellow line Suspension adjustable, rear radius bar, quickshift. Full instrumentation including tacho with adjustable shift light. Water temp original plus extra gauge oil pressure. Cams accredited bolt in cage. remote mount battery. Power steering. DBA rotors, Winmax pads, vent to front brakes. Dual battery isolat

Deniliquin NSW, Australia
Share
Watch
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando

Edinburgh SA, Australia
Share
Watch
7
1980 Isuzu Truck Setup as a Car Transporter. Curb weight 5400kg, GVM 9000kg Reliable 6 cyl Turbo Diesel, Manual. 9500lb winch. Twin fuel tanks, underbody toolbox and small water tank 3 Seater, seats in good condition. Runs and drives. Needs work for RWC - oil leaks, minor rust in cab, etc Going in a different direction, time to move it on. $10000 Located in Toowoomba. will consider swaps (plus cash either way) for a car trailer, 4WD, old school projects, camper/motorhome, motorbike... show m

Toowoomba QLD, Australia
Share
Watch
5
Roll Cage
This 72 Camaro is a project I started to build for the Australian Tans Am class. It has been caged and had the floor modified to suit the correct gearbox and where the muffler will sit. It has also had the pedal box master cylinders installed. The only thing missing is the 2 front guards. The car will also come with 2 brand new full quarter panels, a fiberglass bonnet, new race seat, pedal box, race fuel tank and brand new limited slip differential from the US. I have spent $25,000 to date

Cedar Creek QLD, Australia
Share
Watch
5
Cadet 12 cart Engine hasn’t had rebuilt ever low hours on the cart New set of wets come with

Victoria, Australia
Share
Watch
7
Roll Cage
Log Book
Excel X3 race car excellent value for entry level motorsport, dual log books AASA and Motorsport Australia. New one piece Fiberglass dash, AGI bolt in cage, Cobra Monaco race seat and harness, new excedy clutch, new tyres, car is very clean and tidy inside and out, Mechanically good, standard suspension (controlled Shocks cost $2500). Comes with a spare Silvertop engine and some spare panels car is located in western Sydney. Selling as circumstances have changed.

Blaxland NSW, Australia
Share
Watch
6
Jam Motorsport supply and support new Wolf Thunder cars Australia wide. These cars have a great power to weight as they make 201 (or 221 for the 1.1L) with a final weight of 378kg. They sound amazing revving to 12500rpm with their computer controlled paddle shift system. The cars are made for both entry level drivers as well as professionals. The cars are built to be customer run which is great, which means in Australia you could buy a car, do the normal maintenence your self and Jam Motorspo

South Australia, Australia
Share
Watch
25
Roll Cage
Log Book
Ultra Rare 1998 Porsche Supercup, here is a chance to own a piece of Porsche Motorsport history, 1 of 29 Porsche factory built 996 Supercup’s built for the 1998 Supercup season, these were the first ever 996 factory built race cars by Porsche & were the prototype for Porsches water-cooled era. A truly unique factory built prototype race-car using a mix of 993 race components & newly developed 996 race components, a 993 GT2 gearbox is mated to a unique rod shift gear selector not seen in any othe

Melbourne VIC, Australia
Share
Watch
6
Roll Cage
Log Book
For Sale The fastest trophy car in Australia, car is immaculate inside and out. This car finished 2nd outright in the 2016 Bathurst 12 hour and 8th outright in the 2017 12 hour, the car was re-shelled and serviced by Nismo Japan after the 2017 race and was never raced. I purchased the car from Nissan Australia last year and competed at Challenge Bathurst where I posted a time of 2.05.01 with a 3 tenth lift due to traffic, we then raced the car at the 1st round of GT World Challenge at Phillip Is

Prospect NSW, Australia
Share
Watch
7
GKN ORIGINAL EQUIPMENT ( OEM ) Shafts - NEW. G-Force are the distributor for GKN Race Shafts in Australia and New Zealand. Porsche and AUDI driveshafts for ALL Porsche and AUDI Race Cars available. GKN supply the shafts for these cars to the manufacturer worldwide. # 991 red shafts, car set new; $5450.00 + gst. # 997.2 green shafts, car set new: $5295.00 + gst. # 996 / 997.1 blue shafts, car set new: $4995.00 + gst. Call for further info and availability.

Braeside Victoria, Australia
Share
Watch
9
Professionally built and suitable for range of work and leisure uses.Tub interior is not fitted out but does baselines,lights,power and tie down points..Fibreglass lid was manufactured in Canada, alloy rack suits boats,kayaks and is constructed to hoist lid vertically if being removed. Full width alloy multipurpose tool box, Jerry cans,camping gear at front.95 litre water tank with electric pump and tap on drawer bar.9 kg gas bottle with bayonet fitting near tap. Wheels are 6 stud 16x7 alloys,t

Laurieton NSW, Australia
Share
Watch
3
5x2 metre car trailer with ramps. This trailer is new and licensed ready to use.

Secret Harbour WA, Australia
Share
Watch