33 items under $10,000 for sale
Most Recent
Most Recent
Keyword
Popular Vehicles
Price
Listing Type
All Results
8
2024 Jakoma Trailers car trailer located in Port Kennedy Measurements: 5m total trailer length 2.02m deck width between guards Specs: 2 ton rated trailer 1300kg payload Full galvanized frame Heavy duty Alko jockey wheel Mechanical override brakes 8 tie down points LED light system Ramps included 5x 14x185 tyres on Sunraysia rims Ready for licencing 12 month structural warranty
2
I am looking for a new home in Perth, for our 4WD roller Dyno. I’m hoping to find a race team or workshop who was considering a dyno and have room for it to be set up (approx 8 x 5 mtrs) I will supply the dyno plus all the supporting equipment in exchange for some realestate to set it up under a shared custody arrangement. I am NOT interested in selling it even though this is a for sale ad. I am interested in connecting with people looking at buying or leasing a dyno to discuss this very rare o
7
This trailer was built for a lightweight clubman kitcar and was used to carry the kitcar from Perth to Sydney and back. Suitable for a lightweight racecar under 900kg in weight or perhaps dirt bikes or an off road vehicle. Could also be repurposed as a camping trailer or even a food truck. It is fully road registered and way below its replacement cost. It has 3x alloy wheels and high quality Trojan Duratorque independent suspension. Currently has wood composite panels on the sides. Tare weight =
3
Pair of Penske 7500 series double adjustable gas charged shocks. These are like new, limited use - too long for my setup. 15.5" exended, 4" stroke, 11.5" compressed lengths. Top knurled rebound adjuster, bottom allen key compression adjust. These shocks are set for fine tuning with 75 clicks compression and 45 clicks rebound. Has 1/2" bearing top, 5/8" bearing bottom, but can change of required. These shocks will cost around $2,600 aud a pair new in Australia.
5
It was used on the 2007-2014 GT500 cars, Developed by Shelby and C&R Racing. Upper hose size=2.0 inches, Lower hose size= 1.75 inches, Thickness=3.0 inches. used for test purposes, only has about 300km of use. It is in excellent condition in the original C & R packaging.
3
this M84 has the second Lamda turned on. so has 2 systems,( suit V6/V8 ) also has gear cut activated, has data logging .Motec site give all the features.
1
Tr7/8 steel bonnet with steel air vents Immaculate condition
5
Only 1,527 Race kms since new. Sealed by Bates Motorsport to run in either TGRA 86 Series or TGRA Scholarship Series. Standard flywheel and starter motor supplied with engine. Will require series mandated lightened flywheel to run in the series. Supplied ex Adelaide.
6
Genuine March 771 Formula 1 dual element rear wing. Purchased from genuine March collector but now excess to requirements. Would suit other period open wheeler cars but best suited of course as a genuine spare or required wing for a March restoration project.
8
Genuine BBS E30 Magnesium center wheels. I have 1 front (8.5/21.5-13) and 1 rear (340/620R13). They are both in excellent condition. Tyres will need to be replaced. $1,500 for both. Open to offers.
8
Multipurpose built trailer to take a full-sized Formula Vee racecar, with an extra set of tyres and every spare, tool box and kit bag you will need. Has been used for all sorts of other reasons - house moves, karts, bikes etc Additional box on the front for those extra, extras. Box measures 1500 W, 600 D, 500 H. Fully road registered and compliant in WA, with rego to 17 Jun 24, then $86 pa. Fully enclosed and weather proof, to allow a safe storage space on your driveway, as well as a dry race
5
Suitable for racing car or small sports car, lightweight alloy body, steel chassis with wooden floor. Lockable doors on front storage space. Alloy wheels with spare, Toyo 195R14 8 ply tyres. Rewired with LED lights plus running lights. Electric brakes with spares. Internal dimensions 4.0 metres long plus 0.75 metres front storage, 1.7 metres wide, height 1.1 metres. Long ramps lockable tailgate.. Tows beautifully.
8
Chev 350 brodix heads stage 10 and match ported victor junior manifold. Flowed by Bill Hanson 800 hp with brand new stainless steel valves lapped in ready to go, just needs springs and rockers $2,300 ono . Also circlematic kit for powerglide trans new $600 ono.
1
3
Through a series of sales and swaps I've managed to get a hold of this Link FuryX ECU. Top of the line offering from Link ECU before going to the G5 Voodoo. Brand new in box, with manual, ECU is unlocked. Missing the mount and tuning cable, requires header plugs or loom to suit. Will require a complete wire in from competent sparkie. I also have a Bosch 4.9 LSU O2 and a Haltech IAT Sensor if required (+$200) Pickup in Seville Grove, Perth 6112 or can courier Aus wide. Selling to fund a H
9
Genuine Europipe, imported at a cost of $9000 AUD. Used for less than 1000km. Removed for sale of car. The best system for the 2RS! Sounds incredible with new OE install hardware.
5
These OZ Racing, Italian made, Ultraleggera wheels are brand new never having had tyres fitted. The most well-known 6 double-spoke wheel ever! Ultraleggera is known and recognized as one of the most popular OZ wheels. The wheel design is Formula 1 race-inspired. Its racing DNA is apparent in several details: the spokes are slim and extend all the way out to the external lip, the centre is carved out. Two (2) wheels included in sale. Sizes are 8"x18" with a stud pattern (PCD) of 5x108. Offset
4
Rose joint Rod End Steering Pin. 4140 HT Steel. Suite Commodore. Two pins per pack. $180 Front suspension shock tower cap. Suite Commodore. 10mm Offset. Comes with bolts, washers and one 3mm drill guide bolt. $200.
3
SSR GT1 19inch wheels are a brand new set of 4 in original boxes and never fitted on a vehicle, they are made in Japan and a premium quaility product. Come with hub centres and new wheel nuts to suit Nissan vehicles. Took 5 months to be delivered from ordering, cancelled Nissan Z project forced sale. Invoice available proving purchase of $2250 from a Autotechnic and genuine SSR wheels. Staggered set are 19x9 1/2 pos 35 and 19 x 10 1/2 pos 22 PCD 5X 114.3. Suited to many vehicles with 5x114.3 pcd
8
Brand new, never fitted. Changed direction with my build so surplus to requirements. Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S550 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 1⁄2-inch DOM tubing, BMR’s K-members give you a lightweight, extremely strong K-member. Ever