271 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
4
Good used front struts, made in the USA by Motion Control Suspension, steel strut body, used/formerly owned by Danny Timewell in IPRA to win at Sandown. Same design has been run by other Commodore owners racing in the Bathurst 6 hours competitively against the BMW's. Locally developed valving. These units are 3 way adjustable (dual compression, single rebound), ride height & droop adjustable. Currently sold as struts only. These will be serviced & provided with a 12 month service warranty to the
4
17
1982 Ford Falcon Dick Johnson Redroo Tribute car currently racing in Touring Car Masters in New Zealand .number 117 I’ve owned this car for 16 years and raced it on every race track in New Zealand and raced at Sydney Motorsport Park, Bathurst 1000 Twice , Bathurst International once and Adelaide 500 once all with Touring Car Masters Australia. Development the car over the years to a fun reliable Muscle Car . Numerous trophies gathered over the years .The car has fully homologated Motorsport NZ
5
For sale Built 2021/22 2022 Vic state championship winner 2022 Vic club championship winner Motorsport Australia log booked Top ten contender at national level Car was built and regularly maintained by Les Small performance to the highest standard. No expense was spared on the build, everything was new and has been updated and well maintained since completion. Car continually on the podium and winning races in all states. Fresh engine and gearbox only 1 meeting old, ready for the 2024 seas
11
I bought this truck as was, It was going to be the new Kumho Motorsport truck. (And my race truck on the side). F$%#kin TCR. It is set up to transport 1 car with a separate Kitchen/workshop area up front. It has room for a medium size sedan with the divider wall in but I have also seen this truck carry V8 Supercars. It is well set up with extender ramps to carry up to a 2500kg sedan. Since purchase, I have spent over $20K bringing it back to A1 spec. This spend included all the mechanical updat
5
Incar plumbed fire extinguisher, serviced Dec 2023
10
Roll Cage
Mitsubishi Evolution - EVO V Tarmac Rally / Track Car Roll Cage – Motorsport Australia Approved, fully welded 6 Point, by Fabraications FIA roll cage padding VELO Apex Seats: (1x) XL and (1x) Std fitted on welded rails, alloy side mounts VELO Black 5 Point harnesses Fire extinguishers (x2) Remote electrical cut out switch HC battery mounting case Rear fire wall – carpeted MCA Red Competition Suspension, fully adjustable Front RS strut tower brace Brembo Brake Callipers, ELIG Sports Brake Pads,
4
4 spot 2018 Camaro Brembo calipers complete with pads. Apparently they will fit VE commodore uprights.
3
2 x Bridgestone re71rs tyres. 255 40 17 used on one track day. Clearing out the shed. Only selling as my car runs 16s and I bought these 17s to try on the car. I still run re71rs 16s on my car. They're a great tyre.
4
I bought this seat brand new from revolution race gear in Melbourne. It retails for $1450. They sold it to me for $1250 because there's a very small blemish in the leather near your right thigh. About 8mm long where something had been stacked on it. I fitted it to my VL race car on the weekend but due to the shoulder supports location i was unable to change gears comfortably. My loss is your gain.
5
I have a set of AP racing calipers to suit a commodore from VB to VS compatible with 330mm front and 300mm rear rotors. Selling as they don't fit under my wheels on my VL race car. I have 16 inch wheels. Comes with a set of unknown pads plus a set of circo competition fronts.
1
FOR SALE COMPLETE DRIVE TRAIN 2022 BRZ/GR86 FA24 ENGINE, GEARBOX, TAILSHAFT, DIFF & DRIVESHAFTS. FROM 4400km ROAD CAR! Do not waste my time wanting to ask more about it. It is as stated. More photos to follow.
10
Roll CageLog Book
BMW 1M 08/12 in white $39500 Australian Dollars 105717 Klm or 65689 miles Full bolt in AGI roll cage fitted 2019 Bilstein coils and shocks fully adjustable, Turner Motorsport Monoball Front Control Arm Bushings Harrop extreme brake kit fitted by Harrop, New Endless front pads just fitted. Oversize intercooler and all charge piping upgraded to alloy with extra tap points with Tial BOV, AEM WMI with controller fitted for safety and inlet track cleaning not performance. MHD tune 339hp at the whe
19
Selling for a friend it’s only a expression of interest atm might be open to swaps Daf 360 auto single drive no issues 2 car carrier with heaps of storage 6 beds Split system 3 tvs Downlights multiple power points ect
10
Lotus 7/ Clubman chassis. This car was raced by my father in the 70s and has been in storage since. Believed to be a Lotus 7 but cannot verify this, the only stamp I can find on the chassis is shown in the photos. Definitely not complete but includes many parts as pictured. Happy to answer any questions or arrange more photos if required.
3
AP Racing CP6465-218 pull type master cylinder 21.8mm
4
3SET KOYA SEMI FORGED WHEEL 2 SETS HAVE GOOD SLICK TYRES DUNLOP 1 SET HAS ARE WHITE WITH DUNLOP WET TYRES NOTE TYRE ARE 265/625 R17 NOTE WHEEL ARE FOR VR VS COMMODORE
10
Mitubishi race car transporter, 6.6LT turbo diesel. Great reliable truck does 100kms been used for speedway car, Truck currently on club reg will be sold as is. Winch compressor etc tyre rack work bench, inside has split system, stereo L shaped lounge & messinine . Tool boxes down both sides of truck. Selling due to going to a bus.
10
Iveco Eurocargo 2002 no rego has been parked in the shed for six years for more information phone 0428530131
2
Near New M800 and Data Logger Dash has not been used I owned as a spare for my FD RX7 Racecar. features enabled are as follows: M800 SN1323 single lambda, Hi/lo injection, Cam control, Advance functions (Traction control, Launch Control, Gear Ign cut, Overun boost) Dash ADL Dash SN 2732 shift / warning lights 1mb logging, Pro logging, standard inputs, See attached screen shot