SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

125 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

17
Hino truck this set up has had lots of dollars spent on it. The truck has 503,563kms Tyres are all brand new. serviced every 10,000kms it has a 12v system, and 240v, shower and gas, 500l water tank, truck is excellent condition, comes with 6 months NSW rego awning, heaps of storage, winch, Fringe, tyre racks, Call for more info and picks inspection by appointment only

Bargo NSW, Australia
Share
Watch
6
Open Wheel car trailer will suit most open wheel race cars. Built to transport an Historic Formula Atlantic. The Trailer has a winch and excellent storage. Dimensions are. Rear opening 1.960 wide, Internal width 2.250, OA width 2.320, Internal length 4.450, Distance between wheel arches 1.800 and internal height 1.150. It has electric brakes and a manual tilt mechanism. Well, maintained and in very good condition.

Port Macquarie NSW, Australia
Share
Watch
4
SUIT FORD 9" ... Unit Is as new 4.33 Ratio for 31 Spline axles - PVC case included - Note: this is the updated GoldTrac Platinum with increased strength internally around the gears ...

Ingleside NSW, Australia
Share
Watch
9
Isuzu race car transporter, great truck, we have been all around australia in the last few years in it and still currently being used, always serviced every 10,000 km,it’s fitted with the later model non turbo engine and cruise on 100kmh and is great on fuel, air cond, pwr steering, recaro seats with matching rear seats, very well set out pan with belly lockers both sides and rear step down floor section with floor belly lockers, mezzanine roof, tyre rack, roof shelving , long range tanks, 200l

Rouse Hill NSW, Australia
Share
Watch
1
Ingersoll Rand 1" Drive Impact Wrenches as supplied by Hurd Pit Tools in the USA. 1 x brand new (unused) 1 x almost new (very little use) Price for both

Mittagong NSW, Australia
Share
Watch
8
4AGE for sale bought for a AE86 build but going a different direction selling on behalf of customer. built by John Henden in 2007 and used in a clubman for a short time than sold and has been in storage since. made 112kw and 163nm, comp ratio of 12.15 so its safe to run on 98 cams are 9mm lift 304 duration. has a hand written note book from engine builder with specs . engine is fitted with ITBs and was running with the wolf3d engine management. has a light weight flywheel fitted and a c

Berrilee NSW, Australia
Share
Watch
1
Purchased new two years ago and never used due to this assembly being much too difficult to fit.into our race car. This is Wilwood part number WIL-340-3950 and the purchase price today (in Australia) is around $400- including postage. Accordingly will clear this from my collection of car parts with a sell price of $300-

New Norfolk TAS, Australia
Share
Watch
1
Purchased this unit twelve months ago with the intention of using this in our Improved Production Torana race car however found that it could not be fitted due to limited room under the dash This has never been used and the current sell price for this throttle pedal with the mechanical linkage system is $724- SKU 72615 and SKU 72-79X Do not consider we will use this and would take $480- to clear this from my collection of car parts.

New Norfolk TAS, Australia
Share
Watch
10
Big Block Chev Dart Big Chief Heads 2.3"inlet valves 1.9"exaust valves 1.7 T & d rockers 3 sets of valve springs Head studs to suit Dart tunnel ram to suit tall deck All in good condition Need to sell kings Langley 2147

Kings Langley NSW, Australia
Share
Watch
21
Approx measurements: 7m long. 2.3m wide. Rear door opening: 1.865m. Front accommodation height: 1.6m and length 2.440. Rear load area: 4.8m. Overall height 1.7m Built for a medium size race car Electric Brakes Gooseneck hook up Brake a way brake system Electric drop tailgate/ ramp Full accommodation at front (lounge/ sleeping area) carpeted Installed 12 volt & 240 volt lights Kitchenette area Water / fridge / storage etc. Television/ Radio / Air Conditioner / Heater & Solar Panel ( n

Brookvale NSW, Australia
Share
Watch
19
The ultimate motor home / toy hauler 1994 Scania Bus Full custom engineered motorhome conversion Excellent mechanical condition Well maintained engine Alloy wheels Massive undercarriage storage Rego Till June 2024 (Can be registered as historic rego) GVM 21,500 Tare 16,600 Sleeps 8 Solar panels Large generator Black / Grey / Fresh Water tanks Gas instant hot water Split system Aircon LED downlights Strip LEDs Sink Gas stove Full size fridge Microwave 2 flatscreen Tv’s Queen size bed with u

Narara NSW, Australia
Share
Watch
20
2006 Mack Premium (655,862Km) 370hp (Ex Victoria – Dave Dickson Race Team) Fully engineered with modification plate, registered to carry 6 people, licensed as motorhome Rated 15T, setup for sprintcar but can accommodate other uses – bitumen racing Air bag suspension Alcoa rims (tyres new March 2023) Immaculately built with step through to kitchenette Inc. sink / microwave / built in cupboards & benches Sleeps 3 – double bed above kitchenette / 1 in cab Single door between kitchenette to pan Ai

Wagga Wagga NSW, Australia
Share
Watch
1
NISSAN 370Z (2009-2014) / FAIRLADY Z Z34* SEIBON GTR-STYLE CARBON FIBRE HOOD. Custom made in USA with delivery due February 2024. Sourced through Empire Performance, Myaree W.A. Price plus shipping in Australia.

Sandy Bay TAS, Australia
Share
Watch
25
2019 InTech 36 ft Toy Hauler Caravan, custom designed. Never been registered, will come with 12 months rego. Full aluminium chassis, GN Gooseneck hitch, 96" wide, 6 tonne Tembren soft ride independent suspension, Air conditioner, diesel heater, electric lift double bed at rear, kitchen fitted with microwave, Dometic full size 3-way fridge & 3 burner gas stove top, plenty of storage. 170 watt Solar panel, 3 x Heavy Duty batteries. Lounge area (can be removed to fit in bikes, etc), large storag

Coffs Harbour NSW, Australia
Share
Watch
2
Garry Williams meth dominator with launch plate & Barry Grant fuel rail with regulator

Coffs Harbour NSW, Australia
Share
Watch
2
Moroso fab alloy sump 8" deep with kick out. Suit stroked engines

Coffs Harbour NSW, Australia
Share
Watch
1
BRODIX SQUARE PORT DOMINATOR BBC 9.8 DECK

Coffs Harbour NSW, Australia
Share
Watch
1
Brand new The Blower Shop tall deck 10.2 blower manifold polished.

Coffs Harbour NSW, Australia
Share
Watch
21
2008 Kenworth K108 6x4 Prime Mover, ULTRA SHIFT 18SPD Immaculately presented truck inside and out with thousands spent on new paintwork and accessories and reconditioned CRATE Cummins ISX engine fitted 350,000 km in 2015. An 18 Speed Eaton Fuller Auto Shift Transmission, Dana D46-170 Rear Axles on Kenworth Airglide 460 Air Bag Suspension Alloy Bull Bar, Dual Exhaust Stacks, polished 10 Stud Alloy Rims, new stainless- steel guards, V. Orlanldi Fixed QRTT, Alloy Walk Plate, Integrated Sleeper Cab,

West Hoxton NSW, Australia
Share
Watch
8
2001 FD RX7 - Engine and Gearbox Package ONLY * Price Drop* 13B-RE S8 Doweled Bridgeport 2mm Seals Built by Matt Russell Race Engines 600rwhp @ 18psi on E85 Literally the whole running gear from bumper to gearbox yoke as it ran in the car MoTec M84 Loom (plus spare S8 Loom) Coil Packs V Mount Rad/IC & Piping Wastegate Dump Pipe Fuel Pumps Fuel Lines Series 8 Box HD Single Plate Clutch Professionally removed from running car for a project that is now going a different direction. Pick up ce

Tuggerawong NSW, Australia
Share
Watch