174 items for sale

Used 'old style' Data-1 transmitter unit with the following (refer images): - > transmitter unit > charger cradle > under/outside car cradle (has slight damage but is useable) > operating and maintenance information sheets > boxed in original packaging In good working order. Battery recharged only three times since being replaced. Recently recharged to full and found to be fully operational. Price includes AUD$20.00 for postage Please note: also advertised elsewhere Local pick up can be arra

Price reduced Very high performance Slotted Brake Rotors. Suits a variety of cars, including SS/SSV & older HSV. Only very light use ~500km (see pics). Full set front and rear. 2 x DBA42029s rears: Diameter 324 Height 56.1 Thickness 22 C/Hole 67.4 2 x DBA42028s fronts: Diameter 321 Height 52.2 Thickness 30 C/Hole 67.4

Original Group C 308 engine block with main caps. Purchased as a spare part. So no engine number. 3.9 inch bore machined to 4 inch bore (not 4 inch & 7 thou)to suit cosworth pistons for original Group C engine. Enquiries phone 0405647951 & please leave a message if no answer. I will call back.

Custom built hydraulic tilting car trailer. AL KO 2000kg IRS (independent rubber suspension) torsion axles equiped with electric brakes and mechanical hand brake. Compact electric/hydraulic power pack with hydraulic cylinder for tilting with push button activation. 1800kg electric winch. Alloy checker plate floor with alloy ramps that stow away under rear of trailer. Anderson plug provided for battery connection to vehicle for hydraulic and winch operation. Recessed anchor points. Work light. Fr

Super GT Z33 GT300 wheel, magnesium, with Rays box. As run, grit n all. Located Melb, $500 plus shipping AUD (Note, can source full set if you are after 4, please note they are used, and sold as is) Mola's 2006 season with the Fairlady Z! Long time Nissan team Mola is well known for jumping from GT300 to GT500 in 2011 and instantly winning two consecutive championships. Prior to those turn of events, Mola spent several years cutting their teeth and honing their craft in GT300 with the Fairlad

Limited use, these were spares for Team Mola Z33s, run in GT 300 and GT 500, can be used for other applications, all details in photos. Endurance brakes, used by Championship winning team.

Super GT Z33 moulded screen, rare, was used on championship winning GT300 Z33 car, does fit a standard z33 also, keep in. mind this in not glass, FIA approved.

This beautiful example of a 2013 Chevrolet 3500 Dually is reluctantly offered for sale. It took me a long time to find a clean example such as this one. Its had the CP4 fuel injection pump upgraded to the more reliable CP3 pump and a 165 gph 5g Air Dog lift pump to assist constant two micron filtered fuel to the injection pump. It has a genuine Chevrolet water pump recently fitted. This truck is an absolute dream to drive and requires nothing. It has 7 great tyres [including spare]. It has a

3.6mLx2.0mWx2.0mH external box dimension enclosed trailer • Blasted and powder coated frame • ACM panel cladding (white, silver, gunmetal grey, black) • Propeller plate on front and lower sides • Powder coating of all flashings and trims • Galvanised draw bar and axle • Lift up rear door with gas struts • Side man access door • Lift up side hatch with gas struts • Enclosed tool area in left hand side hatch • Double height kart tyre rack in tool area • Aluminium fabricated and powder coated tool

012 audi transaxle originally out of a 1989 audi 2 litre great box for open wheeler or kit car 100mm cv flangers, pinion wheel and gear set in great condition, can be pulled apart to be checked out on inspection

Ralt RT4 Front wings and plates brand new cost $1,400 take $900.00 Don't wait till you need them at a race meeting.

Set of 4 Magnesium Brabham wheels, 2 x Fronts 10 x 13 had little use, 2 x Rears 14 x 13 appear to be unused.

Selling some surplus motec ECUs that I no longer need. First one is a Motec M84 Good condition only used for dyno time. $1600 2nd is a Motec m400 Used in a rally car $1000 Open to offers can post Aus wide at your expense or pickup Geelong Vic.

1992 Isuzu Twin Cab Race Car Transporter • 380,000 km • 6-cylinder naturally aspirated diesel engine • 6-speed manual gearbox • 7-seater with plenty of cabin space • A little slow on hills but cruises comfortably at 110 km/h Set up for touring/work: • Solar panels with DC charger and house battery • USB charging points • House air conditioning • Water tank with hot water service and outdoor shower • Loads of storage Transport & equipment features: • Fits full-size sedan, SUV or similar •

Transporter heaps of storage takes 2 cars easily generator. air compressor . With internal air lines .lift gate . near new tyres . External power points 45 foot long Located tooradin vic

Skip the Wait – Your 2026 Transporter is Already Underway! We’ve got a 2026Panton Hill Welding Transporter already in construction and ready for December pickup. No long lead times – this one’s ready to be customised your way. Lock it in early and we’ll build it to suit your needs. Standard Features Include: • 48ft Length • 4000kg Dhollandia Tailgate • BPW Disk brake Axles • Suits 4 or 5 Cars • Kubota Lowboy Generator • Like a “B” double ‘A’ Trailer Also Available And

Wanting to buy 1x RECARO 'Profi-A' seat as pictured with exposed back. Please contact me if you have anything available.

NEW 2026 HNS 4.8m Enclosed Dual axle Internal floor length is 4.75m trailer external full width is 2495mm width between mudguards is 2005mm drawbar length is 1.5m internal height is 2.2m GVM 3500kg Tare 1550kg Chassis and drawbar at 150mm x 50mm x 5mm X 450gr RHS duragal Steel 4mm Automotive spec Aluminum Cladding walls, high gloss white (flexible core) 1pc fiberglass FRP roof LED autolamps tail lights and clearance lights throughout the entire trailer load sharing greaseable suspension ( 4200

NEW 2026 HNS 6.5m Enclosed Tri axle Internal floor length is 6.45m trailer external full width is 2495mm width between mudguards is 2005mm drawbar length is 1.5m internal height is 2.2m GVM 4500kg Tare 2050kg Chassis and drawbar at 150mm x 50mm x 5mm X 450gr RHS duragal Steel 4mm Automotive spec Aluminum Cladding walls, high gloss white (flexible core) 1pc fiberglass FRP roof LED autolamps brand tail lights and clearance lights throughout the entire trailer load sharing greaseable suspension

I have a bunch of Cup Car Parts for sale as follows. • 2 sets of 997.2 Forged factory 1-piece rims $4000 per set • 1 set 0f 997.2 BBS 3-piece rims $3500 • 2 sets 997.1 rims with wider rear inner section to run 997.2 tyre $2500 per set. • 1 x 997.1 LH factory Cup Door $3000• • 997 Cup Brypar – New front and rear disc rotors (no Hats) $2000 • 997.1 Rear BBS rim $700 • 997.1 BBS front and rear outer rims $300 each • 997 Cup Hollinger Gearbox $25,000 • 997 3.9L Cup Car Engine – hear in car running w