SSR Enabled
Australia's #1 Enthusiast & Motorsport Marketplace
Australia's #1 Enthusiast & Motorsport Marketplace

100 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

1
Mainline AWD chassis Dyno for sale. Reluctant sale due to business direction change. This Dyno has been a reliable, accurate unit and is still in use in our workshop. Details; •Genuine Mainline 4WD Dyno •Well maintained & fully operational •Perfect for performance workshops or new dyno business •Can assist with handover/training if required •Located in Townsville, QLD • Buyer responsible for removal/transport Serious buyers only. Happy to discuss details, specs and further details via phone.

Garbutt QLD, Australia
Share
Watch
5
For street car and race car. Creates a solid boot floor and looks factory with the carpeting back in Custom made by Timmy at Likes Mechanical Braced for maximum strength in extreme conditions Battery relocated into custom box Kill switch easy access Allows plenty of room underneath for custom high flow exhaust Cost me $1800 to get made Parting our car, have to many projects Custom 3inch varex muffler exhaust available

Gold Coast QLD, Australia
Share
Watch
2
RS250 RS265 RS275 Imported from Spain, AST is an FIA certified company Selling because I’m parting out the car Comes with interior trims Cost me over $4000 to buy it, ship, import broker, sand blasted, powder coated

Gold Coast QLD, Australia
Share
Watch
6
Purchased directly from Dick Johnson Racing, this right rear quarter panel is from their Supercars Gen3 Mustang prototype car. It was signed in 2025 by Brodie Kostecki and Will Davison during Brodie's first year with DJR and Will's last year as a full-time Supercars driver. They've actually signed it upside down as it was easier, the last pic shows the correct orientation as it would've appeared on the car. As you can see, the panel has had a hard life. I think that adds to it though, it was d

Albion QLD, Australia
Share
Watch
11
Enclosed semi trailer ~ Can carry 2 x cars ~ Has kitchen and shower ~ Workshop area, Aircon, 12v diesel heater, compressor, 240v plugs inside and out Gas hot water, ~ fresh water tank and grey tanks, solar on roof, ~ fridge, microwave, oven, ~ plenty of storage areas, new tyres all-round ~ Trailer has Qld transport inspection every year Located in Carrara Gold Coast Price negotiable May part trade for smaller enclosed trailer or Pantech

Carrara QLD, Australia
Share
Watch
5
6.5 Mtrs inside 3500 kg axles . Electric brakes . One piece roof . Black trim out . Grey panels a/c 3.5 kw . 240 v power and lights . 2 pack inside and out . 1960 between archers . 1970 high inside . 2360 frame to frame sideways . Twin winches. Triple lock caravan door with security mesh.

Gold Coast QLD, Australia
Share
Watch
8
2020 Built Enclosed Trailer Suits 2” truck pin can be easily changed to gooseneck. 10m Long 3m Internal Height Alloy Plank Floor Dexter 6000 Pound Axles 12” Electric Brakes Straight Bearing Hubs Sleeps 4 (Double and 2 Bunks) 12v/240v Engel Fridge Underbunk Reverse Cycle AC Winch, Compressor and Charge System Easy Lift Tail Gate Plenty of Storage and Bench Space Would suit many classes of cars Contact Dave for more information 0407400371

Ayr QLD, Australia
Share
Watch
10
7.5m Enclosed Trailer with huge storage box at front with internal bench and over ramps. 2.45m internal width. Loading Winch, Door Winch 2 x Side Large Opening Panels Front Tool Box on draw bar LED Lights Translucent Roof Low Loader Drop Axles. Caravan door & screen Dual side windows Trailer GVM3500 kg but it's over built so could be upgraded to 4.5tonne. 1850mm internal height 5400mm long ramps 6000mm wall to tailgate (this could be extended another 1200mm by removing the front stora

Tallebudgera QLD, Australia
Share
Watch
5
Lightly used in great condition with all the extras.

Gilston QLD, Australia
Share
Watch
17
Enclosed tri axle trailer. Originally professionally customised as an event office. Fully registered with RTA until July 2026. Sleeps 4 people and includes a large 2 car annexe. Perfect for race meets. • ATM: 4500kg • GTM: 4300kg • 70mm hitch • Electric winch with remote • Full fold down rear door • Hydraulic jack stand • LED lighting through out • 210 amp hour battery • Dometic Fridge- 3 way • Dometic Roof Air conditioner • CTEK Battery Charger • Sanyo Microwave • 1 x Double Bed • 2 x Single

Arundel QLD, Australia
Share
Watch
3
C8 Corvette Coupe 1. Fender Splash guard set @ $179.00 2. Engine top cover in red $575.00 3. clear engine cover $380.00

Brisbane City QLD, Australia
Share
Watch
6
Hydraulic drop trailer remote controlled withe remote and winch making it easy for one man to load and unload racing cars formula cars or anything else with ease. Can custom make comes with reverse camera.

Hillcrest QLD, Australia
Share
Watch
10
Race trailer with toilet Split system aircond Smart tv with roof ariel Fridge Full carpet Lined inside roof and walls Stainless toolbox or kitchenette built in35 2 x winch 1 x car 1 x door Solar system 12v led light system Dimensions in photos Skyline system with satelite mount 3500watt silent invertor

Cedar Creek QLD, Australia
Share
Watch
5
Brand New CNC Strut Tops Pro Top mounts 6082-T6 CNC machined mounting parts 7075-T6 aluminum bearing housing (55g only!) Extremely lightweight setup Full adjustment (caster, camber, rotating) Welding required when installing. Postage included Australia wide

Gold Coast QLD, Australia
Share
Watch
5
Steering radio control button and bracket bolts on behind steering wheel. No more velcro and mutable mounting points. Can post world wide postage extra Race car builds, fabrication, paint and panel CALL: 0418674333 WEB: https://mrpautomotiverefinishing.com.au/

Redland Bay QLD 4165, Australia
Share
Watch
8
TraKspecTM️ Tilting Car Trailer | 3.2T ATM Proudly Australian Designed and Manufactured. PEACE OF MIND * ️ Warranty: 12-Month Structural Warranty included. * ️ Quality: Engineered to exceed VSB 1 (Rev 6) & 100% ADR Compliant. * Custom Colours: Included in the price for all new build orders. AVAILABILITY & STOCK * Teal TraKspecTM️: SOLD * ⏳ New Builds: Currently a 3-week turnaround. SPECIFICATIONS * ATM: 3200kg | Tare: 1000kg | Payload: 2200kg * Deck Size: 4800mm x 2030m

Maudsland QLD, Australia
Share
Watch
14
A very unique one-off eye-catching sleek designed car or machinery trailer is offered for sale by Lockyer Trailers. An exceptional craftsman built, robust trailer with no expense spared. Finished in dark charcoal Raptor coat for extreme durability, combined with sections of coloured composite aluminium panelling to create a striking and appealing result. The aerodynamic design of the front protection cone system provides an extremely fuel-efficient towing trailer. Loading ramps integrated into

Gatton QLD, Australia
Share
Watch
4
Enclosed trailer, This trailer has had the axles upgraded for extra weight capacity. It has been used for carrying Go Karts but can be used for a single vehicle transporter. As you can see in the pictures it has Two doors on either side and one door in the back.

Redland Bay QLD, Australia
Share
Watch
6
Two Kart Trailer for sale, excellent condition and very well maintained $35000 + Gst Side work area with work bench and tv, inside has fridge aircon and tv.

Redland Bay QLD, Australia
Share
Watch
4
5 wheels. Brand New / Never Been Fitted 18x9s. 5/120

Robina QLD, Australia
Share
Watch